3 analog inputs, 6 analog outputs, High-end AKM® 24-bit96 kHz AD and DA converters, sampling rates from 32 to 96 kHz, 4 different mono and stereo output operating modes

Setup Wizard Steps Through Speaker and Amp Selection and Levels - Auto EQ Wizard with 28-Band RTA - AFS® Wizard - Stereo Feedback Elimination with 12 feedback notch filters - dbx 120A Sub-harmonic Synthesizer -Classic dbx Input Compression - JBL® Speaker and Crown® Power Amp Tunings included - 24-Bit ADC/24-Bit DAC, >113 ....

Feedback Elimination, 2.7 Seconds of Alignment and Zone Delay, RS-232 PC GUI control, Classic dbx Compression and Limiting, Graphic and Parametric EQ, Auto-EQ Function, Full Bandpass, Crossover, and Routing Configurations, Auto Gain Control, Pink Noise Generator and fulltime RTA, Setup Wizard with JBL speaker and Crown Power Amplifier Tunings Security Lockout, Wall Panel Control Inputs

Input Impedance 10kOhm, electronically balanced, Maximum Input Level +20dBu, CMRR Better than 50dB (30Hz-20kHz), Input gain +-15dB variable in 0.1dB steps, Input Connector XLR-3F or equivalent, Output Impedance <50 Ohms, electronically balanced and floating, Maximum Output Level +20dBu into 600 Ohms or greater, Output Gain +-21dB, variable in 0.1dB steps Output Connector XLR-3M or equiv.

Stereo Feedback Elimination with 12 feedback notch filters, Dual 28-band Graphic EQ, Classic dbx Compressor, 120A Sub-harmonic Synthesizer, 2x3, 2x4, 2x5, 2x6 Crossover Configurations, Stereo Multi-band Parametric EQ, Stereo Output Limiters, Alignment Delay, Pink Noise Generator, Auto-EQ with 28-band RTA, 2 Channel XLR Input and 6 Channel XLR Output, 24-Bit ADC/24-Bit DAC, >110 dB Dynamic Range

This automatic Level controller makes sure that an adjusted decibel level never can be exceeded. The limiter will be connected between the mixer or pre-amplifier and the power amplifier. A 19inch front panel is available as an option. LOCK-191: 1 x MKII or LOCK-192: 2 x MKII

Input Impedance 10kOhm, electronically balanced, Maximum Input Level +20dBu, CMRR Better than 50dB (30Hz-20kHz), Input gain +-15dB variable in 0.1dB steps, Input Connector XLR-3F or equivalent, Output Impedance <50 Ohms, electronically balanced and floating, Maximum Output Level +20dBu into 600 Ohms or greater, Output Gain +-21dB, variable in 0.1dB steps, Output Connector XL

Input Impedance 10kOhm, electronically balanced, Maximum Input Level +20dBu, CMRR Better than 50dB (30Hz-20kHz), Input gain +-15dB variable in 0.1dB steps, Input Connector XLR-3F or equivalent, Input sample rate 44.1kHz, 48kHz, 88.2kHz, 96kHz, Output Impedance <50 Ohms, electronically balanced and floating, Maximum Output Level +20dBu into 600 Ohms or greater, Output Gain +-21d