DJ Power WP-2 Bubble Fogger
DJP-WP2
- Jet design, produce lots of bubbles filled with fog
- Well-designed heating system releases the fog evenly and purely, no fluid dropping off
- Two fans make the fog bubble fly higher, further
- Bubble and fog fluid storage in separately
- The excess bubble fluid will flow back to waste fluid tank
- Combining with Led light
- Built-in LCD control, 3-pin and 5-pin DMX control
4 in stock
WP-2 bubble fog machine is the first bubble blaster from DJPOWER. It comes with patented Jet-design which makes lot of vivid bubbles filled with fog with less fog outside. The excess bubble fluid will flow to waste storage bin instead of dropping on the ground. To protect bubble fluid from getting bad and ensure high quality bubbles, bubble fluid is well stored in the tank. With this feature, the unit can also be mounted high in the truss, launching bubbles all over the sky. No matter for shows, concerts, parties and events, this unit will be pretty good choice.
AC POWER
Input Voltage & Rate: 220-240 V, 50/60 Hz
Current Limiter Type: Breaker
Current Limiter Specifications: 5 A, 250 V
Total Power Consumption: 650 W
Power Input Connector: Lockable PowerCon
Power Output Connector (Daisy Chained): Lockable PowerCon
HEATING
Heat Up Time: Appr. 3 min
Heater Type: Aluminum Heater Block
LIGHT SOURCE
LED Color: RGBY
LED Type: Quad-Color
Power per LED: 8 W
Quantity of LED: 6 pcs
Total Power of LED: 48 W
CAPACITY
Fluid Tank Capacity : 1.3 L
Bubble Capacity: 1.3 L
OUTPUT
Adjustable Volume
Max Output Volume: Appr. 4,500 cuft/min
Max Output Height: Appr. 4 m
Max Output Distance: Appr. 3.5 m
Haze Fluid Consumption Rate: Appr. 60 min/L
Bubble Fluid Consumption Rate: Appr. 40 min/L
FEATURES
Electronic Thermo-Control
Adjustable Output
Adjustable Fan Speed
CONTROL
On-device Manual Control : LCD control board
Wireless Control: W-2
Control Protocol: DMX-512
DMX Channel Range: 12
Data Connectors: 3- and 5-pin XLR
ACCESSORY
Power Cord
Omega Bracket
Wireless Controller Model: W-2
CONSUMABLE
Consumable: PRO-P & PRO-C