Sennheiser E 914 - Cardioid Instrument Microphone for Overhead & Hi-hat

Seven-piece Dum Microphone Set w/ Case

Small Diaphragm Condenser matched pair of Microphones

Includes 1x e602-II, 4x e604, 2x e614 in a custom slim-line aluminum case with die-cut foam to protect your investment - - Country of origin: Germany

Cardioid instrument microphone especially suitable for use with bass drums, bass guitar cabs and tubas. Solid, lightweight, and easy to position. For studios, clubs, rehearsal rooms, smaller gigs, or for home recording.

Super-cardioid electret condenser microphone for demanding instrument recordings, and performances that produce extended frequencies, high SPL handling and transient response. For woodwind, strings, and home recording.

Condenser boundary plate microphone. Half-cardioid for a precise, fast, and realistic sound from a kick drum. Also for conference tables, podiums, altars, stages, pianos, and percussion. Full-bodied response.

Dynamic cardioid bass instrument microphone with integral stand mount. Designed for deep frequencies such as kick drums, bass guitar amps, and tuba. Dampens mid-range to accentuate high-end and bass. Rugged housing.

- transducer type: dynamic
- polar pattern: supercardioid
- frequency response: 20 Hz - 10 kHz
- sensitivity (1 kHz): -64 dBV/Pa / 0,6 mV/Pa
- weight: 605 g
- frequency response shaped specifically for kick drums and bass instruments
- built-in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
- studio quality performance

- transducer type: dynamic
- polar pattern: supercardioid
- frequency response: 50 Hz - 16 kHz
- sensitivity (1 kHz): -51 dBV/Pa / 2,8 mV/Pa
- weight: 468 g
- built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
- uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound

- transducer type: dynamic
- polar pattern: supercardioid
- frequency response: 50 Hz - 16 kHz
- sensitivity (1 kHz): -51 dBV/Pa / 2,8 mV/Pa
- weight: 275 g
- tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound
- uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound

NEW! Drum Professional quality microphone ideal for kick drum and low frequency performance and recording. XLR-XLR cable incl.

NEW! Drum Professional quality microphone optimized for snare and tom drum applications. XLR-XLR cable incl.

NEW! Instrument Professional quality microphone for amplified or acoustic instrument performance and recording. XLR-XLR cable incl.

NEW! Drum Kit A Complete set of 4 microphones for Drums: 2 x PGA56, 1 x PGA57, 1 x PGA52, XLR-XLR cables and carry case.

NEW! Drum Kit Extended set with 6 microphones for drums: 2 x PGA56, 1 x PGA57, 1 x PGA52, 2 x PGA181. XLR-XLR cables and carry case.

The PGADRUMKIT7 includes a complete microphone package for reinforcing kick drums, snare drums, rack toms, floor toms, congas and cymbals for performance and recording.

1 x PGA52
3 x PGA56
1 x PGA57
2 x PGA81
3 x A25D
3 x AP56DM
7 x XLR-XLR
Comes in a zippered carrying case

- Instrument Industry standard, highly versatile microphone tuned for clean reproduction of amplified and acoustic instruments.

- Instrument Rugged, battery-powered, flat-response microphone for live performance and remote recording applications.

• award-winning condenser mics
• designed specifically for drums
• all you need for recording full kit
• supplied with mic clips and rugged ABS fightcase
• all microphones covered by our unique LIFETIME WARRANTY

The CAB901 is a balanced microphone cable constructed using the MC305 cable and fitted with one VC3MX 3-pin male connector and a VC3FX 3-pin female connector. The 24 AWG (0.23 mm²) thin & dense stranded bare copper conductors are surrounded by a high coverage bare copper spiral shielding. CableType: MC305 * Connector: VC3MX-VC3FX

The CAB901 is a balanced microphone cable constructed using the MC305 cable and fitted with one VC3MX 3-pin male connector and a VC3FX 3-pin female connector. The 24 AWG (0.23 mm²) thin & dense stranded bare copper conductors are surrounded by a high coverage bare copper spiral shielding. CableType: MC305 * Connector: VC3MX-VC3FX

The CAB901 is a balanced microphone cable constructed using the MC305 cable and fitted with one VC3MX 3-pin male connector and a VC3FX 3-pin female connector. The 24 AWG (0.23 mm²) thin & dense stranded bare copper conductors are surrounded by a high coverage bare copper spiral shielding. CableType: MC305 * Connector: VC3MX-VC3FX

The CAB901 is a balanced microphone cable constructed using the MC305 cable and fitted with one VC3MX 3-pin male connector and a VC3FX 3-pin female connector. The 24 AWG (0.23 mm²) thin & dense stranded bare copper conductors are surrounded by a high coverage bare copper spiral shielding. CableType: MC305 * Connector: VC3MX-VC3FX

The CAB901 is a balanced microphone cable constructed using the MC305 cable and fitted with one VC3MX 3-pin male connector and a VC3FX 3-pin female connector. The 24 AWG (0.23 mm²) thin & dense stranded bare copper conductors are surrounded by a high coverage bare copper spiral shielding. CableType: MC305 * Connector: VC3MX-VC3FX

The CAB901 is a balanced microphone cable constructed using the MC305 cable and fitted with one VC3MX 3-pin male connector and a VC3FX 3-pin female connector. The 24 AWG (0.23 mm²) thin & dense stranded bare copper conductors are surrounded by a high coverage bare copper spiral shielding. CableType: MC305 * Connector: VC3MX-VC3FX

The CAB901 is a balanced microphone cable constructed using the MC305 cable and fitted with one VC3MX 3-pin male connector and a VC3FX 3-pin female connector. The 24 AWG (0.23 mm²) thin & dense stranded bare copper conductors are surrounded by a high coverage bare copper spiral shielding. CableType: MC305 * Connector: VC3MX-VC3FX