ISE 2026: Shure
18-02-26
SLX-D+
Shure introduces the new SLX-D+, now with ShowLink Ease and an ultra-wide frequency range!
Building on the widely accepted SLX-D platform of transparent, 24-bit digital audio and rock-solid RF performance, SLX-D+ is designed to add an extensive 138 MHz wide Tuning Range (region dependent), plus patented digital feedback reduction DSP and encryption.
In addition, SLX-D+ features ShowLink® Ease, a special link between receivers and transmitters that enables remote management and powerful automated functions. Use the SLX-D+ with the Shure Wireless Workbench® (WWB) RF management software, or link your SLX-D+ receivers to the iOS or Android mobile device of your choice via the WWB Mobile app, for remote monitoring and control.
- Transparent 24-bit digital audio quality with >118 dB dynamic range
- Highly stable RF with a wide tuning range of 138 MHz for greater geographic coverage
- Up to 11 simultaneous systems in 6 MHz TV bands
- Up to 11 simultaneous systems in 6 MHz TV bands
- Automatic Setup - once linked, SLX-D+ receivers and transmitters remain linked despite RF interference
- ShowLink® Ease allows the transmitter parameters to be adjusted remotely from the paired receiver, including:
- Change the transmitter frequency once the open frequency is identified
- Adjust output level
- Controls for locking and unlocking channels
- Transmitter firmware updates
- Monitor RF status and control receiver and transmitter parameters with Wireless Workbench desktop software, or remotely with the WWB Mobile app via Wi-Fi or Bluetooth
- Patented Shure Digital Feedback Reducer software is built into every SLX-D+ receiver to automatically reduce unwanted audio feedback if it ever occurs.
- Every SLX-D+ component and system comes with AES-256 encryption installed, for complete and secure peace of mind
- Up to 8 hours of use with 2 AA batteries (included) or optional Shure SB903 Li-ion rechargeable batteries and charging accessories (Up to 5.5 hours with the SLXD5+ Portable Receiver).
- Full range of components, including ½ rack single and dual receivers and full rack quad receivers (standard and Dante), plus bodypack and handheld transmitters. Also portable receivers and plug-on transmitters for all your applications on the go.
- Manage antenna daisy chaining to reduce the number of accessories needed and space requirement (SLXD4Q+ and SLXD4QDAN+ only - total three quad receivers)
- Quickly set up, monitor and manage complex multi-channel configurations with Muti-Mic Mode (SLXD5 only)
ANX4
Shure presents a revolutionary new receiver with Cloud licenses that can receive up to 16 channels of Axient Digital or 24 channels of ULX-D!
The ultimate high-tier, large-channel capacity wireless receiver, the Shure ANX4 receives up to 16 channels of Shure Axient Digital or 24 channels of Shure ULX-D wireless audio in a single rack space. For maximum flexibility, the ANX4 does not come with pre-configured active wireless channels, but you can purchase channels in one or four channel increments and activate exactly the number of channels you need in your ANX4*. Licenses can be activated in one ANX4 and later removed and activated in another ANX4 as needs change. ANX4 channel licenses are perpetual licenses, not subscription licenses, and can be purchased through the same authorized vendors where ANX4 hardware devices are sold (or at Shure.com/anx4) and managed through your ShureCloud user account. All the exceptional features found in the award-winning Axient Digital and ULX-D receivers that set the standard on stages, facilities, on tour and in venues around the world are now available in the ANX4**. Whether you use the ANX4 in Axient Digital or ULX-D transmission mode, the ANX4 maximizes your budget, rack space and rack weight by delivering a large number of wireless audio channels in a single rack design. Additionally, this 1RU format enables streamlined antenna configurations for high-channel environments. *ANX4 receiver does not come with preconfigured active wireless channels. System functions depend on the transmission mode activated: Axient Digital or ULX-D (ANX4 does not support both systems simultaneously).
- Scalable wireless receiver for use with Axient Digital and ULX-D wireless systems
- Receives up to 16 Axient Digital channels or 24 ULX-D channels in a single rack space
- Channel licenses are permanent licenses, available in single and four channel versions (sold separately)*
- Purchased channel licenses can be activated in one ANX4 as needed and later deleted and activated in another ANX4 easily via a ShureCloud user account
- Wide tuning range from 174 MHz to 2 GHz, including all Axient Digital and ULX-D options (except the ULX-D 902 MHz band)
- All Axient Digital or ULX-D features included**
- Large 6.6-inch color display on the front panel
- Five-segment channel quality meter displays RF signal-to-noise ratio
- ¼-inch headphone jack on the front panel for monitoring with Dante Browse (for both Axient Digital and ULX-D)
- Streamlined and cost-effective antenna array for large-scale wireless deployment scenarios
- 4 x Ethernet ports for network control and Dante/AES67 digital output options
- 4 x coaxial RF antenna input connectors support multiple frequency bands and provide greater coverage for complex setups
- Network control with Shure Wireless Workbench® for comprehensive and enhanced RF monitoring and management
- DC module version available to support redundant power supply
