Dateq SPL-D3MK2 sound level meter in a flight case

28-09-26

New at Bekafun: Dateq SPL-D3MK2 sound level meter in a flight case, ready to go

Running a party, concert or event and need to keep an eye on sound levels? We have what you need. Bekafun has the Dateq SPL-D3MK2 in stock, built into a sturdy flight case. Take it out, put it on a stand, and it starts measuring.

DAT-SPLD3MK2MOBILE

Dateq

Dateq SPL-D3 MK2 Mobile - Built in flightcase for mobile use

- SPL-D3MK2 ready for mobile use.
- dB; dBA, dBC-2 adjustable Leq measurements in 1-60 seconds or 1-60 minutes
- 365 day logging of all displayed measurements
- USB-port for USB FAT32 drive & dump of measurements in .csv file
- USB connect for configuration
- Processor based instead of SD based
- Accessible via network, PoE possibility
- 35mm pole mount and M10 mounting points
- Included: Microphone (external or internal mounting possible), windscreen, PowerCON cable, seal
- Accessory box in lid
ACCORDING:
- IEC61672-1 class 2
- VLAREM II Cat. 1, Cat. 2 & Cat. 3
- NFS 31-122-1-2017 & decrét 2017-1244

€ 2.418,79

prices incl. taxes and VAT

Stock

Why a flight case?

We've put everything you need into one rugged case:

The measurement microphone is built into the flight case. No loose cables, nothing gets lost.
A 35 mm pole mount lets you put the meter on a standard speaker stand, clearly visible to the DJ or engineer.
A powerCON power cable is included.

That makes it ideal for rental companies, PA companies and municipal equipment-lending services. The meter travels a lot and has to work every single time.

What does the SPL-D3MK2 do?

Easy to read, even from a distance. Large digits that change colour: green means fine, orange means careful, red means too loud.
Adapts to the light. In a dark venue, the display dims automatically.
Measures by the rules. It measures according to the international IEC 61672-1 Class 2 standard. It complies with the Flemish VLAREM II regulations (categories 1, 2 and 3) and with the French rules on amplified sound (Décret 2017-1244 and NF S 31-122-1). It measures in dB(A), dB(C) or dB-flat, with LAeq and LCeq over an adjustable time.
Keeps a record. Measurements are stored internally. Use the USB port to copy them to a USB stick (FAT32). The stick is not included.
Flexible settings. The Windows software lets you set thresholds, brightness and sensitivity. The calendar function allows different sound levels at different times of the day or week.
Theatre mode. The display stays off as long as everything is fine. It only switches on when the level is about to get too high.
Expandable. Use it on its own or together with a Dateq SPL5MK2 or SPL6 limiter. Optionally, add an extra display (SPL-EXT) or an SRL-1 relay, for example for a warning light at the DJ booth.

Back to overview