Pro sound & light: report

AUDIOPHONY PACoaxial Projector Speaker 15"+1"-400W/8-100V-IP56

AUDIOPHONY PASound Projector SubWoofer 15"-400W/8-100V-IP56

Digital speaker management system, full matrix mixing 4 inputs, 8 outputs, 32-bit converters with 96khz sampling, USB connection for PC or RJ45 LAN connector for remote control, programmable PC? software, low-frequency EQ, high-frequency EQ, Lo-Cut crossover, Hi-Cut crossover, All-Pass crossover, 6 digital compressors/limiters per output, state of the art signal processing
Free software is also included and can be used for the dsp quadrodps 2.0 and quadrodsp 6.4 amplifiers.

DSP digital amplifier of 4x500W@4Ω / 4x300W@8Ω ,Bridge 2x1000W@8Ω, D class, support constant pressure 70V/ 100V(1000W@10Ω), Real time DSP, noise gate, matrix mixer, PEQ, crossover, delay, compressor, USB and RJ45 by TCPIP protocol, Standard FIR phase correction function.

Multi-functional network DSP digital power amplifier. Can monitor the status of amplifier and adjust the function of DSP in real time remotely. Built-in DSP functions with compressor, limiter, noise gate, PEQ, matrix mixer, delay etc.

Led Follow Spot 600, Professional Follow Spot with electronic Zoom and Focus, Led Source 600 watt 7500K, 38000lm, Color wheel 7 colors + open white, CTO wheel? 3200k+4500k+5600k, Beam angle: 7°-13°. 17kg

Creativity has no limits, but workspace certainly does. A place where you can unfold without limits is the Gravity¶© FDJT 01 DJ desk. On it you keep your set-up compact and always ready for the moment when inspiration strikes.Your trusty monitors can be placed on the height-adjustable, 360¶ø rotatable and 15¶ø tiltable trays. The precise positioning and inclination of your loudspeakers is made mu

Key Features

- Tascam VIEW (Visual Interactive Ergonomic Workflow) interface allows intuitive operation with three different view modes
- Multiple displays with two 7-inch colour touchscreens
- 44 input channels (40 mono, 2 stereo)
- 22 flexible output buses plus main L/R bus with 31-band graphic EQ
- 54-bit float-point FPGA mixing engine, 96 kHz sampling rate
- Ultra-low latency: 2× Fs (20.8 μs) in mixing engine, 0.51 ms analogue-to-analogue
- 32-bit/96 kHz A/D and D/A conversion
- Tascam HDIA (High-Definition Instrumentation Architecture) microphone preamplifiers
- Built-in Dante interface (64 inputs/outputs); supports redundancy, AES67, DDM and SMPTE 2110
- 32-bit/96 kHz USB audio interface (32 inputs/outputs)
- 16 mic/line inputs (up to +32 dBu), 16 XLR line outputs with flexible routing
- Four multi-effects processors
- Tascam Sonicview Control software for Windows, macOS and iPadOS enables remote control and off-line editing
- Two Tascam expansion slots
- Optional 32-track SDXC recorder, MADI, AES/EBU and analogue I/O cards available for the second slot

Other Features

- Operating systems for hardware mixing surface and mixing engine are independent of each other for high stability and continuous audio flow
- Faders can be individually removed and replaced, top panel can be disassembled without disconnecting cables for easy servicing
- Library for snapshots, effects, modules, parametric EQ, graphic EQ, gate, compressor
- 18 assignable user keys, seven custom fader layers, eight DCA groups
- 16+1 100-mm motorised faders
- 16 encoder knobs with colour LEDs
- 16 LC displays with colour LEDs for channel name, input level and gain reduction meter
- Internal 2-track recording/playback with SD card or USB flash drive
- 8 TRS line inputs, 2 RCA stereo input pairs, XLR talkback input
- XLR monitor outputs
- Standard (6.3-mm) and mini (3.5-mm) headphones outputs
- Word clock In, Out/Thru
- 1000BASE-T gigabit Ethernet
- 8-in/8-out GPIO on DB25 connector
- TRS footswitch connector
- XLR 4-31 lamp connector
- Power switch with guard
- Optional Dante-enabled stage box with 16 inputs/outputs (SB-16D)

Key Features

- Tascam VIEW (Visual Interactive Ergonomic Workflow) interface allows intuitive operation with three different view modes
- Multiple displays with three 7-inch colour touchscreens
- 44 input channels (40 mono, 2 stereo)
- 22 flexible output buses plus main L/R bus with 31-band graphic EQ
- 54-bit float-point FPGA mixing engine, 96 kHz sampling rate
- Ultra-low latency: 2× Fs (20.8 μs) in mixing engine, 0.51 ms analogue-to-analogue
- 32-bit/96 kHz A/D and D/A conversion
- Tascam HDIA (High-Definition Instrumentation Architecture) microphone preamplifiers
- Built-in Dante interface (64 inputs/outputs); supports redundancy, AES67, DDM and SMPTE 2110
- 32-bit/96 kHz USB audio interface (32 inputs/outputs)
- 24 mic/line inputs (up to +32 dBu), 16 XLR line outputs with flexible routing
- Four multi-effects processors
- Tascam Sonicview Control software for Windows, macOS and iPadOS enables remote control and off-line editing
- Two Tascam expansion slots
- Optional 32-track SDXC recorder, MADI, AES/EBU and analogue I/O cards available for the second slot

Other Features

- Operating systems for hardware mixing surface and mixing engine are independent of each other for high stability and continuous audio flow
- Faders can be individually removed and replaced, top panel can be disassembled without disconnecting cables for easy servicing
- Library for snapshots, effects, modules, parametric EQ, graphic EQ, gate, compressor
- 18 assignable user keys, seven custom fader layers, eight DCA groups
- 24+1 100-mm motorised faders
- 24 encoder knobs with colour LEDs
- 24 LC displays with colour LEDs for channel name, input level and gain reduction meter
- Internal 2-track recording/playback with SD card or USB flash drive
- 8 TRS line inputs, 2 RCA stereo input pairs, XLR talkback input
- XLR monitor outputs
- Standard (6.3-mm) and mini (3.5-mm) headphones outputs
- Word clock In, Out/Thru
- 1000BASE-T gigabit Ethernet
- 8-in/8-out GPIO on DB25 connector
- TRS footswitch connector
- XLR 4-31 lamp connector
- Power switch with guard
- Optional Dante-enabled stage box with 16 inputs/outputs (SB-16D)

- Dante-enabled stage box and interface with 16 analogue audio inputs and outputs
- Redundant Dante operation using Primary/Secondary lines
- Equipped with etherCON-compatible connectors
- Support for Dante Domain Manager
- AES67 is supported to allow connection with Ravenna and other compatible audio network technologies
- Data transfer compliant to SMPTE 2110
- 16 balanced mic/line inputs (XLR) with switchable phantom power (48 V), input signal and overload indicators
- 16 balanced line outputs (XLR) with output signal indicators
- Up to 96 kHz sampling frequency at 32-bit resolution
- Can be positioned on the floor or mounted in a rack (3U)
- Fully controllable from connected Sonicview mixer
- Remote control and offline editing using Tascam IO Control software for Windows, macOS and iPadOS
- Selectable reference level
- GPIO interface with eight inputs and outputs, expands to 16 inputs and outputs when connected to a Sonicview mixer
- Selectable LED brightness
- DC input for redundant power supply (DC power supply not included)

- Sampling frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Quantization bit depth: 16/24 bit
- Mic inputs 1/2 (balanced): XLR-3-31 (1: GND, 2: HOT, 3: COLD), 6.3-mm standard TRS stereo jack (Tip: HOT, Ring: COLD, Sleeve: GND)
- Instrument inputs 1/2 (unbalanced): 6.3mm standard TS jacks (Tip: HOT, Sleeve: GND)

-Power input: 4-pole / 80 AMP
-Main breaker: 63 AMP
-Main channels: 24
-Capacity and protection: 16A per channel
-Output connectors: Multipins, channel 21-24 also on True1
-483 x 266 x 354mm
-23kg

-WUXGA (1920 x 1200)
-16.000 ANSI lumen
-10.000:1 dynamic contrast
-Laser phosphor lightsource (20.000h)
-HDBaseT
-3D
-24/7 operation
-2x HDMI / 2x DisplayPort / 3G-SDI
-24.8 x 53 x 69.5 cm 49 kg