• Dynamic closed-back design
• Natural, tight, and accurate sound reproduction
• Linear response throughout the frequency range
• Balanced studio-quality sound
• High-performance phase-coherent drivers for excellent imaging
• Great choice for home studio
• Over-the-ear design built for comfort and isolation
• Soft cushion ear cups with 90-degree swivel for easy single-ear monitoring

• Dynamic closed-back design
• Natural, tight, and balanced sound reproduction
• Linear response throughout the frequency range
• Balanced studio-quality sound with exceptional imaging
• Great choice for studio and critical listening
• Over-the-ear design built for comfort and isolation
• Soft cushion ear cups with 90-degree swivel for easy single-ear monitoring
• High-performance phase-co

• Dynamic closed-back design
• Excellent for audio playback and monitoring
• Over-the-ear design built for comfort and isolation
• Soft cushion ear cups with 90-degree swivel for easy single-ear monitoring
• High-performance, phase-coherent drivers
• Ultra wide sound field
• Deep, accurate bass
• Accurate reproduction of subharmonics

• Dynamic closed-back design
• Large soundstage with natural, balanced, lifelike sound reproduction
• Linear response throughout the frequency range
• Balanced studio-quality sound with exceptional imaging
• Excellent for mixing, monitoring, and general listening
• Over-the-ear design built for comfort and isolation
• Soft cushion ear cups with 90-degree swivel for easy single-ear monitorin

-Type: Pre-polarized Condenser
-Polar Pattern: Cardioid
-Frequency Response: 50 Hz - 18 kHz
-Impedance: 250 Ohms
-Sensitivity: 4.5 mV/Pa @1k

-Type: Pre-polarized Condenser
-Polar Pattern: Cardioid, Hypercardioid
-Frequency Response: 40 Hz - 18 kHz
-Impedance: 150 Ohms
-Sensitivity: @1k 24mV/Pa (C), 30mV/Pa (HC)

-Frequency Response:40 Hz - 20 kHz
-Output Impedance: 250 Ohms
-Sensitivity: 5.8 mV/ Pa @ 1k (Cardioid) 5.4 mV / Pa @ 1k (Hypercardioid)
-Signal/Noise Ratio (A-weighted): 65 dB
-Equivalent Noise Level (A-weighted): 29 dB
-Maximum SPL @ .5% THD 135 dB
-Power Requirements: 9 - 52 V phantom (ADX20i-P)

-Transducer Type: Pre-Polarized Condenser
-Frequency Response: 40 Hz - 20 kHz
-Polar Pattern: Cardioid
-Output Impedance: 250 ohms
-Sensitivity: Cardioid - 6 mV / Pa @ 1k; Hypercardioid - 5.6 mV / Pa @1k
-Equivalent Noise Level: <29 dB (A-weighted)
-Signal to Noise Ratio: >65 dB
-Maximum SPL: =135 dB
-Power Requirements: 9-52 V phantom

-Frequency Response: 40 Hz - 20 kHz
-Output Impedance: 250 Ohms balanced
-Sensitivity: 5 mV / Pa @ 1k
-Equivalent Noise Level: 29 dB (A weighted)
-Signal to Noise Ratio: 65 dB
-Power Requirements: 9 - 52 Volts phantom

-Frequency Response: 40 Hz - 20 kHz
-Output Impedance: 250 Ohms balanced
-Sensitivity: 5 mV / Pa @ 1k
-Equivalent Noise Level: 29 dB (A weighted)
-Signal to Noise Ratio: 65 dB
-Power Requirements: 9 - 52 Volts phantom

-Frequency Response: 40 Hz - 20 kHz
-Output Impedance: 250 Ohms balanced
-Sensitivity: 5 mV / Pa @ 1k
-Equivalent Noise Level: 29 dB (A weighted)
-Signal to Noise Ratio: 65 dB
-Power Requirements: 9 - 52 Volts phantom

The ADX51 is a professional, pre-polarized condenser microphone for stage, studio and broadcast applications. The ADX51 is clear sounding, accurate in response and handles both close and distance miking for various acoustic instruments.

Type Pre-polarized Condenser
Polar Pattern Cardioid
Frequency Response 50Hz - 18kHz
Impedance 250 Ohms
Sensitivity @1k 5 mV/Pa

Two-channel Phantom Power supply.

110V, switchable to 220. Detachable power cord.

Power Adapter

AA Battery/Phantom Power Adapter - on/off switch and bass roll-off works with same mics as APS910

Heavy duty shock absorbent table stand with latching on/off switch and XLR connector.

For use with the Audix CabGrabber™ or Cabgrabber™ XL, this boom arm features a 12 inch adjustable steel tube that enables the CabGrabber™ to handle front address microphones and a wider variety of miking positions.

The Audix CabGrabber is a must-have for both the studio and the stage. This simple device lets you conveniently mike a guitar amplifier or cabinet without the use of a bulky mic stand. Instead, the CabGrabber clamps directly onto an amp to hold a microphone firmly and securely in place.

The Audix CabGrabber XL is a must-have for both the studio and the stage. This simple device lets you conveniently put a mic on a guitar amplifier or cabinet without the use of a bulky mic stand. Instead, the CabGrabber XL clamps directly onto an amp to hold a microphone firmly and securely in place.

Ideal for rack toms, floor tom, congas and horns. Slight mid-bass boost. Specifications
Type-Dynamic
Polar Pattern-Hypercardioid
Frequency Response-80Hz - 18kHz
Impedance-250 ohms
Sensitivity-@1k 1.2 mV/Pa

-Transducer Type: Dynamic
-Frequency Response: 68 Hz - 18 kHz
-Polar Pattern: Hypercardioid
-Output Impedance: 280 ohms
-Sensitivity: 1.2 mV / Pa @ 1k
-Capsule Technology: VLM Type B
-Off-Axis Rejection: >30 dB
-Maximum SPL: =144 dB
-Power Requirements: None
-Connector: 3-pin XLRm

the D4 is an excellent choice for miking instruments requiring low frequency reproduction such as large rack toms, floor toms, cajon, djembe, leslie bottom, bass flute, sax and baritone sax, trombone, acoustic bass, bass cabs and small kick drums. Specifications
Type-Dynamic
Polar Pattern-Hypercardioid
Frequency Response-40Hz - 18kHz
Impedance-200 ohms
Sensitivity-@1k 1,4mV/Pa

The D6 is an excellent choice for miking instruments requiring extended low frequency response such as kick drum, large toms, and bass cabinets.
Type-Dynamic
Polar Pattern-Cardioid
Frequency Response-30Hz - 15kHz
Impedance-200 ohms
Sensitivity-@ 80Hz 0.8 mV/Pa

Flexible mini-gooseneck with drum tension lug clamp for D2, D4. Other mics can be used by replacing clip.

Heavy duty snap on clip for D series, ADX51, SCX series, ADX12, ADX18

May be used for any microphone by removing the MC2 clip and replacing with a clip of your choice.

-Aluminum Road Case
-3 x i5 Snare Drum Microphones
-1 x D6 Kick Drum Microphone
-3 x MC1 Microphone Clips
-3 x DFLEX Mounts
-1 x DCLIP Microphone Clip

AUDIX Drumpackage 1xI5 2xD2 1xD4 1xD6 4xDvice 1xCase