- Type: Outdoor loudspeaker
- Speakers: Aluminum inverted dome tweeter6 1/2" waterproof woofer with Polyglass treatment
- Sensitivity (2,83V/1m): 87dB
- Frequency response (+/-3dB): 65Hz-23kHz
- Low frequency point (-6dB): 55Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 6.7 Ohms
- Recommended amp power 20-120W
- Filtering frequencies 2,800Hz

- Type: Outdoor loudspeaker
- Speakers: Aluminum inverted dome tweeter8" waterproof woofer with Polyglass treatment
- Sensitivity (2,83V/1m): 88dB
- Frequency response (+/-3dB): 60Hz-23kHz
- Low frequency point (-6dB): 45Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 6.7 Ohms
- Recommended amp power: 20-150W
- Filtering frequencies: 2,800Hz

- Type: Outdoor loudspeaker
- Speakers: Aluminum inverted dome tweeter8" waterproof woofer with Polyglass treatment
- Sensitivity (2,83V/1m): 88dB
- Frequency response (+/-3dB): 60Hz-23kHz
- Low frequency point (-6dB): 45Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 6.7 Ohms
- Recommended amp power: 20-150W
- Filtering frequencies: 2,800Hz

- Type: 2-way compact sealed speaker
- Drivers: 4" Flax mid-bass, 1" Al/Mg inverted dome tweeter
- Freq.response (±3dB): 80Hz - 28kHz
- Low freq. point (-6dB): 72Hz
- Sensitivity (2.83V/1m): 88dB
- Nominale impedance: 8 Ohms
- Minimum impedance: 4 Ohms
- Crossover freq.: 2500Hz
- Recommended amplifier power: 25 - 100W

- Type: 2-way compact sealed speaker
- Drivers: 4" Flax mid-bass, 1" Al/Mg inverted dome tweeter
- Freq.response (±3dB): 80Hz - 28kHz
- Low freq. point (-6dB): 72Hz
- Sensitivity (2.83V/1m): 88dB
- Nominale impedance: 8 Ohms
- Minimum impedance: 4 Ohms
- Crossover freq.: 2500Hz
- Recommended amplifier power: 25 - 100W

DOME FLAX SAT: zie specificaties DOME FLAX SAT 1.0
SUBAIR:
- Type: SUB AIR, Flat bass-reflex subwoofer, integrated 150W BASH amp
- Speaker driver (diameter): 8"
- Bass cutoff frequency (-6dB): 35Hz
- Freq. response (+/- 3dB): 40Hz-200Hz
- Crossover cutoff frequency variable: 50 Hz - 200 Hz
- Input panel: Left Right / LFE
- Continuous power output: 110 W
- Peak power: 150 W

- Type: Two-way compact bass-reflex loudspeaker
- Speakers: 5" Polyflex woofer, 3/4" soft dome tweeter
- Freq. response (+/-3dB): 70Hz to 25kHz
- Low frequençy point (-6dB): 66Hz
- Sensibility (2.83V/1m): 90dB
- Nominal Impedance: 6 Ohms
- Crossover Freq.: 3.5kHz
- Recommended Ampli Power: 25 - 200W

Atmos Channel:
- Type: Fullrange sealed loudspeaker
- Speakers: 4" full-range speaker
- Freq. Response (+/-3dB): 90Hz to 20KHz
- Low freq. point -6dB: 75Hz
- Sensibility (2.83V/1m): 90dB
- Nominal impedance: 6 Ohms

• Compact closed subwoofer
• Very high-power BASH® amplifier (1000W)
• Speaker driver developed and manufactured in France by Focal

Focal hifi 100 ICW 8 - 100ICW8WHITE

• Flax fibre cone
• TMD® surround
• Aluminium/Magnesium ‘M’-shaped inverted dome TAM tweeter
• Speaker drivers developed and manufactured in France
• Leather effect front panel

2x8" (21cm) Flax bass
6.5" (16.5cm) Flax midrange
with TMD® surround
Aluminium/Magnesium ‘M’-shaped inverted
dome TAM tweeter

Focal hifi ARIA S 900 - ARIASTANDS900

• Exclusive Slatefiber technology: dynamic listening
and consistency across the Theva range
• Compact, sleek and harmonious design to suit any room
• Optional stand available, tilted for Time Alignment

61/2" (16.5cm) Slatefiber Midrange/Bass
1" (25mm) Al/Mg inverted dome TNF tweeter

• Exclusive Slatefiber technology: dynamic listening
and consistency across the Theva range
• Compact, sleek and harmonious design to suit any room
• Optional stand available, tilted for Time Alignment

61/2" (16.5cm) Slatefiber Midrange/Bass
1" (25mm) Al/Mg inverted dome TNF tweeter

• Slim, compact floorstanding loudspeaker perfect for any interior thanks to its 5"
speaker drivers
• Slatefiber technology for dynamic, rich and balanced listening experiences
• Better sound image thanks to Time Alignment; sound focused on the listener
• Refined and harmonious design; light stand and grille for the Light Wood finish

2 x 5" (13cm) Slatefiber bass
5" (13cm) Slatefiber midrange
1" (25mm) Al/Mg inverted dome TNF tweeter

• Slatefiber technology for dynamic, rich and balanced listening experiences
• Better sound image thanks to Time Alignment; sound focused on the listener
• Refined and harmonious design; light stand and grille for the Light Wood finish

2 x 61/2" (16.5cm) Slatefiber bass
61/2" (16.5cm) Slatefiber midrange
1" (25mm) Al/Mg inverted dome TNF tweeter

- Type: SUB AIR, Flat bass-reflex subwoofer, integrated 150W BASH amp
- Wireless Transmitter included: LFE and Left/Right Input
- Speaker driver (diameter): 8"
- Bass cutoff frequency (-6dB): 35Hz
- Freq. response (+/- 3dB): 40Hz-200Hz
- Crossover cutoff frequency variable: 50 Hz - 200 Hz
- Input panel: Left Right / LFE
- Continuous power output: 110 W
- Peak power: 150 W

- Type: Active bass-reflex subwoofer
- Speaker: 8 1/4" Polyflex woofer
- Freq. response (+/-3dB): 35Hz - 150Hz
- Cutoff freq. (-6dB): 30Hz
- RCA input: Right, left LFE
- Cut-off freq.: 3.5kHz
- Phase adjustment: Phase inverter 0° / 180°
- Amplifier power: 200W Class-D amplifier
- Power mode: On / Autopower (0.5W)

SIB EVO: zie specificaties SIB EVO 2.0
CUB EVO:
- Type: Active bass-reflex subwoofer
- Speaker: 8 1/4" Polyflex woofer
- Freq. response (+/-3dB): 35Hz - 150Hz
- Cutoff freq. (-6dB): 30Hz
- RCA input: Right, left LFE
- Cut-off freq.: 3.5kHz
- Phase adjustment: Phase inverter 0° / 180°
- Amplifier power: 200W Class-D amplifier
- Power mode: On / Autopower (0.5W)

- Type: Active closed subwoofer
- Speaker driver 12" (30cm): Polyflex woofer
- Freq. response at -6dB: 26Hz
- Freq. response (+/-3dB): 28Hz - 270Hz
- RCA input: Right, left LFE
- Crossover freq. Variable: 40Hz-200Hz (LFE)
- Phase adjustment: Phase inverter 0°/180°
- Power modes: AutoStandby enable/disable
- Amplifier power: 600W Dynamic (300W RMS)

- Type: Outdoor loudspeaker
- Speakers: Aluminum inverted dome tweeter6 1/2" waterproof woofer with Polyglass treatment
- Sensitivity (2,83V/1m): 87dB
- Frequency response (+/-3dB): 65Hz-23kHz
- Low frequency point (-6dB): 55Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 6.7 Ohms
- Recommended amp power 20-120W
- Filtering frequencies 2,800Hz

- Type: Passive subwoofer
- Speakers: 8" Polyglass Woofer
- Sensitivity (2.83V/1m): 89 dB
- Bandwith (+/-3dB): 34-140Hz
- Cut-off frequency (-6dB): 30Hz
- Nominal impedance: 8 Ohms
- Recommended amp power: Max 200W / 4 Ohms

- Type: 3-way in-ceiling
- Drivers: 2 x 5" Flax woofers, 4" Flax midrange, 1" Al/Mg inverted dome tweeter
- Sensitivity (2.83V/1m) 91dB
- Frequency response (+/-3dB): 55Hz - 28kHz
- Low frequency point (-6dB): 45Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 2.9 Ohms
- Recommended amplifier power: 50 - 150W

- Type: 3-Way In-Wall
- Drivers: 2 x 6 1/2" Woofers, 4" Flax Midrange, 1" Al/Mg inverted dome tweeter
- Sensitivity (2.83V/1m): 92dB
- Frequency response (+/-3dB): 40Hz - 28kHz
- Low frequency point (-6dB): 33Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 2.9 Ohms
- Recommended amplifier power: 50 - 150W

- Type of speaker: 2-way coaxial in-ceiling
- Speaker drivers: 6 1/2" ‘W’ Midrange/Bass, 1" Pure Beryllium inverted dome tweeter
- Sensitivity (2.83V/3 feet - 1m): 90.5dB
- Bandwidth (+/-3dB): 55Hz - 40kHz
- Low-frequency cut-off (-6dB): 45Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 5.1 Ohms
- Recommended amp power: 25 - 150W

- Type of speaker: 3-way bass-reflex in-ceiling
- Speaker drivers: 2 x 5 1/8" ‘W’ cone Bass, 4" ‘W’ cone Midrange, 1" Beryllium inverted dome tweeter
- Sensitivity (2.83V/3 feet - 1m): 91dB
- Bandwidth (+/-3dB): 53Hz - 40kHz
- Low-frequency cut-off (-6dB): 43Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 2.9 Ohms
- Recommended amp power: 50 - 180W

- Type of speaker: 2-Way in-wall/in-ceiling
- Speaker drivers: 6 1/2" "W" Midrange/Bass, 1" Pure Beryllium inverted dome tweeter
- Sensitivity (2.83V/3 feet - 1m): 89dB
- Bandwidth (+/-3dB): 55Hz - 40kHz
- Low-frequency cut-off (-6dB): 45Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 4.9 Ohms
- Recommended amp power: 25 - 150W

- Type of speaker: 2-way closed-back in-wall
- Speaker drivers: 6 1/2" Bass/Midrange, 1" Pure Beryllium inverted dome tweeter
- Sensitivity (2.83V/3 feet - 1m): 88dB
- Bandwidth (+/-3dB): 55Hz - 40kHz
- Low-frequency cut-off (-6dB): 45Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 7 Ohms
- Recommended amp power: 25 - 150W

- Type of speaker 3-way closed-back in-wall
- Drivers: 7 1/8" Passive radiator with ‘W’ cone, 6 1/2" Bass with ‘W’ cone, 3 1/8" Midrange with ‘W’ cone, 1" Pure Beryllium inverted dome tweeter
-Sensitivity (2.83V/3 feet - 1m): 91dB
- Bandwidth (+/-3dB): 48Hz - 40kHz
- Low-freq. cut-off (-6dB): 43Hz
- Nominal impedance: 8 Ohms
- Min. impedance: 2.9 Ohms
- Recommended amp power: 25 - 240 W