Zone mixer

- 19" rack mounting, 2U
- Depth (build in): 290 mm
- Depth (incl front): 305 mm
- Power supply: 100 - 240 VAC
- Power consumption (max): 30 Watts
- Zone outputs: 2 stereo
- Signal to noise level SNR (dB): >97
- Total harmonic distortion THD (%): <0.2
- Crosstalk (dB): >70
- MIC inputs balanced: 2
- Phantom power voltage: 48 volts
- Line input unbalanced: 4
- 20 - 25 k Hz

-Input Connections: XLR female balanced (Mic, channels 1-3); RCA unbalanced (Line Inputs 1-6, Left & Right); 1/4-inch TRS unbalanced stereo (Bus Inputs, Zone 1 & 2)
-Output Connections: 1/4-inch TS unbalanced (Zone 1 & 2 Out, Left & Right)
-Input Impedance: 4k Ohms (Mic), 10k O (Line), 10k O (Bus)
-Output Impedance: 200 Ohms (Zone 1 & 2)

-2 Independent Zones, each with balanced XLR-output (+unbalanced on cinch)
-Each zone has 3band tone controls, balance, volume and mono/stereo switch
-11 inputs on 5 Channels (5 balanced mic + 4line + 2phono)
-1Microphone with 3band tone control and zone assignable adjustable talkover.
-Every Channel can be assigned to zone A, zone B or both

Integrated Bluetooth receiver
4-channel Dante™/AES67
Internal mixing & DSP processing
2 x XLR inputs

Front USB type-C port
Integrated Bluetooth receiver
4-channel Dante™/AES67
Internal mixing & DSP processing

- Microphone inputs 1-2: Balanced: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Unbalanced: 6.3-mm TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
- Input impedance: 33 kO
- Nominal input levell: -65 dBu (VOLUME knob at MAX)
Unbalanced: -30 dBu (VOLUME knob at MIN)
- Line inputs (unbalanced): RCA pin jacks
- Nominal input level : -10 dBV
- Maximum input level: 10 dBV
- Input impedance: 22 kO

- Dimension: 105 x 566 x 309 mm
- Weight: 4.64 kg
- Construction: Steel

7 Channel preamp / mixer: Simple and easy to use audio mixer with up to 6 microphone or stereo line inputs !

Scalable flexibility
32-bit ADC & DAC (@48 kHz sample rate)
Scalable mixture of analogue and network channels
Integrated messaging module (trigger & event scheduling)
Auto-update (OTA) feature
16 x 16 included Dante™/AES67 channels (optional expandable up to 64 x 64)
Unmatched flexibility for input, output & zone mapping
AudioBridge for Dante™/AES67 audio transfer for all inputs & outputs
Compatible with all Dante™/AES67 paging/in & output devices
Fully scalable from medium sized to the largest enterprise solutions

Scalable flexibility
32-bit ADC & DAC (@48 kHz sample rate)
Scalable mixture of analogue and network channels
Auto-update (OTA) feature
Unmatched flexibility for input, output & zone mapping
AudioBridge for Dante™/AES67 audio transfer for all inputs & outputs (Optional)
Compatible with all Dante™/AES67 paging/in & output devices (Optional)
Fully scalable from medium sized to the largest enterprise solutions (Optional)
Expandable up to 32 x 32 Dante™/AES67 channels (with optional extension card)

Push to talk button
48V phantom power & XLR input (various microphones)
Audio transmission via Dante™/AES67
Fully flexible & configurable touchscreen (from AUDAC Touch™)
Visual user feedback (LED’s)
PoE powered

LD Systems ZONE 624 4-Zone MixerThe ZONE 624 is a fully-equipped zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The compact 3U rack device also has inputs for an external emergency announcement system and remote- controlled switching mute. Due to its extensive connectivity the ZONE 624 is the extremely flexible control centre solution f

SFP+ Transceiver 10GBASE-SR

NETGEAR ProSafe 10 Gigabit SFP+ transceivers fit into select managed switch SFP+ interfaces, providing hot-swappable installation and removal. Select Smart switches and Plus switches will also connect 10 Gigabit SFP+ transceivers.

10 Gigabit Ethernet “short range” fiber connectivity

LC duplex connector

Fits into SFP+ interfaces of select Managed Switches

Fits into SFP+ interfaces of select Smart and Plus Switches

Drives 10 Gigabit Ethernet up to 550 m (1,804 ft) distances with 50/125µm OM4 multimode fiber cables

Drives 10 Gigabit Ethernet up to 300 m (984 ft) distances with 50/125µm OM3 multimode fiber cables

Drives 10 Gigabit Ethernet up to 33 m (108 ft) distances with 62.5/125µm OM1/OM2 multimode fiber cables

NETGEAR ProSafe 10 Gigabit SFP+ transceivers fit into M5300, M6100, M7100 and M7300 series standard SFP+ interfaces, providing hot-swappable installation and removal. Select Smart switches and Plus switches will also connect 10 Gigabit SFP+ transceivers.

- 2 balanced inputs Microphone/line mono or stereo on Euroblocks connectors
- 2 mono or stereo line inputs on Euroblocks connectors
- 4 balanced mono or stereo outputs on Euroblocks connectors
- Priority Micro
- Phantom power on inputs 1 and 2
- Gain and tone control (3 bands) on channels 1 and 2
- Gain adjustment on all inputs
- RJ45 connector for MIC-DESK4 micro control desk

-Rated output Level/impedance : 0dB/600 ohms balanced
-Sensitivity/input impedance: Mic input (CH1-2) - 60dB~ - 16dB/20 ohms balanced
-Line input (CH1-6) - 60dB~ + 4dB/20 ohms balanced
-Frequency reponse (-1dB): 20Hz - 20,000Hz
-THD: < 0.1
-Crosstalk: > 70dB
-Hum and noise: >90dB
-Power supply: AC 240V
-Weight: 9kg
-Dimensions: 482 x 44 x 320 mm

4 x 8 Audio Matrix System - 2 Mic inputs with Phantom & Priority - 4 Stereo line inputs - 4 Stereo balanced zone outputs - Fully functional integrated web server - iPad & iPhone control apps - TCP/IP and RS232 control ports - Optional wall panels for audio input & control - Optional paging console

8 x 8 Audio Matrix System - 2 Mic inputs with Phantom & Priority - 4 Stereo line inputs - 8 Stereo balanced zone outputs - Fully functional integrated web server - iPad & iPhone control apps - TCP/IP and RS232 control ports - Optional wall panels for audio input & control - Optional paging console

Delivery a flexible audio solution to control multiple functions, easy to use, excellent sound quality, modern and advanced design

- Main microphone input: Balanced: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Unbalanced: 6.3-mm TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
- Input impedance: 33 kO
- Nominal input levell: -65 dBu (VOLUME knob at MAX), -30 dBu (VOLUME knob at MIN)
- Mic/Line inputs (balanced): XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Set to Mic
- Maximum input level: -30 dBu
- Minimum input level: -65 dBu

Mini stereo amplifier 2 x 15W - Balanced line & Mic + WP2xx Input

- Dimensions: 105 x 636 x 329 mm
- Weight: 5.03 kg
- Construction: Steel

- Dimensions: 105 x 716 x 354 mm
- Weight: 6.05 kg
- Construction: Steel

- Dimensions: 105 x 716 x 354 mm
- Weight: 6.05 kg
- Construction: Steel

For horizontal and vertical placement
Versatile application
Precise directional focus
Robust and secure mounting
Space-saving design

Two-way revolving mounting bracket for VEXO108 - White
For horizontal and vertical placement
Versatile application
Precise directional focus
Robust and secure mounting
Space-saving design

Pole mount for outdoor speaker Black version

Pole mount for outdoor speaker White version