Sound level meter - limiter

- Inputs: 2x Balanced Line audio input
- Outputs: 2x Balanced Line audio output
- Audio input: 3-Pin Female XLR
- Audio output: 3-Pin Male XLR
- Power: 2-pin Euro Terminal Block
- Level range: -100 dBV to 0 dBV
- THD+N: <0.15%
- Signal / Noise: >90dB
- Frequency response: 20Hz-20kHz
- Power supply: 24V DC, PSD242 switching power supply included, 100~240V AC / 47~63

- Limited speaker and headphone outputs
- Once installed and calibrated completely eliminates the possibility of ’unauthorised’ volume levels
- No sound quality loss even during protection processing
- Large LED level indication for ’at a glance’ monitoring of signals and warnings
- Time delay relays on outputs for clean power up/down
- Fast, simple installation
- Tamper-proof plate limits access to settings
- A security label is supplied to further secure the calibration settings and show evidence of tampering
- Tamper-Proof bracket (available separately) to lock-in the XLRs and conform to Local Authority regulations.
- Reduces ’call-out’ costs of sound system service/repair engineers, sound system ’down time’ and the consequential loss of venue income, as well as the reputation of the venue.
- External control of Dim and Mute for connection to Fire Alarms or remote operation
- Trigger output when in PROTECT mode
- Logging inputs for both ALERT and PROTECT statuses

-stand alone use or extension for SPL5MK2 & SPL6 limiters
-dB; dBA, dBC-2 adjustable Leq measurements in 1-60 seconds or 1-60 minutes
-365 day logging of all displayed measurements
-USB connect for USB FAT32drive & dump of measurements in .csv file
-USB connect for configuration
- Processor based instead of SD based
- Accessible via network, PoE possibility
ACCORDING:
-IEC61672-1 class 2
-VLAREM II Cat. 1, Cat. 2 & Cat. 3
-NFS 31-122-1-2017 & decrét 2017-1244

De SPL5 is de meer uitgebreide versie van de SPL3TS; Het geluidsniveau wordt geregistreerd door de microfoon, en verwerkt door de DSP. Het uitgangsniveau wordt, indien nodig, gecorrigeerd.
Limiter:
– Werkt volgens het DATEQ SPL limiter principe
– Ondersteund zowel live als elektronische muziek
– Decibel logger in dB(A), dB(C) en 2 flexibele Leq metingen
– 3 tijdsloten per dag
– Uitgebreide fraude detectie
Software:
– 180 dagendata opslag
– Te bedienen over het Internet
– Werkt onder Windows , XP, 7, 8 en 10
– Registratie alleen noodzakelijk als het systeem aangepast moet worden

- Key Holder access only
- Takes only minutes to install
- Tamper-Proof bracket (available separately) to lock-in the XLRs and conform to Local Authority regulations
- Dual 16 segment Left/Right bargraphs for ’at a glance’ level metering
- ’Protection’ processing 16 segment bargraph display
- No sound quality loss even during heavy protection processing
- Once installed and calibrated completely eliminates the possibility of ’unauthorised’ volume levels
- Eliminates sound system abuse and the resulting cost of chassis speaker re-cones, HF diaphragm replacements and amplifier repairs
- Reduces ’call-out’ costs of sound system service/repair engineers
- Reduces sound system ’down time’ and the consequential loss of venue income
- Isolation transformer output option

The CAP21 Basic sound limiter is specially designed device to act on the sound chain, allowing for the control of levels generated by a music system and preventing regulatory noise protection levels from being exceeded. It acts on the whole audio spectrum and without altering the equalisation and sound quality within the premises.

What’s more, it has an external sensor that records the music level within the premises, creating a more pleasant environment with a stable music level and without variations caused by background noise.

The CAP21 Basic sound limiter is configured with the help of a PC and dBconfig software by dBelectronics.

APPROVED BY ALL NATIONAL AND INTERNATIONAL STANDARDS.

· Screen dimensions 192x70 mm (W x H)
· Displayed parameters SPL, Leq 1' and Leq 5'.
·Information on exceeding the level
· Including universal mini DIN cable 5 m long for connection

- Grote duidelijk afleesbare cijfers
- Kan vrijstaand, of in samenwerking met de SPL5 worden gebruikt
- Display dimt automatisch in een donkere omgeving
- Kleur van de cijfers verandert boven een instelbare waarde
- Kan gekoppeld worden met de SRL-1 om als circuit onderbreker te functioneren
- Ondersteund door Windows 98, ME, 2000, XP, 7, 8, 10
- Helderheid van het display is in te stellen
- Threshold kan worden aangepast
- Microfoongevoeligheid kan worden aangepast
- Limiter functie kan worden aangepast

-stand alone use or extension for SPL5MK2 & SPL6 limiters
-dB; dBA, dBC-2 adjustable Leq measurements in 1-60 seconds or 1-60 minutes
-365 day logging of all displayed measurements
-USB connect for USB FAT32drive & dump of measurements in .csv file
-USB connect for configuration
- Processor based instead of SD based
- Accessible via network, PoE possibility
ACCORDING:
-IEC61672-1 class 2
-VLAREM II Cat. 1, Cat. 2 & Cat. 3
-NFS 31-122-1-2017 & decrét 2017-1244
-built in flightcase with powercon connection and 35mm pole mount

De SPL2 is de standaard versie van hun geluidsdruk-begrenzers. De microcontroller in deze begrenzer meet continu het ingangs-signaal en verzwakt de uitgang zoveel als noodzakelijk is om de maximale geluidsdruk beneden een vooraf ingestelde waarde te houden. Omdat de SPL begrenzers geen piek-limiters zijn, wordt de dynamiek van de muziek niet aangetast.

The SPL2TS is the basic version equipped with time slots which guards the sound pressure level under all circumstances. It offers the most cost effective solution to your sound level problems. This limiter is recommended as ‘the best’ by an increasing number of professional sound system installers.

De SPL3 heeft naast dezelfde mogelijkheden van de SPL2 nog een andere functie. Hij heeft een meetmicrofoon zodat ook de geluidsdruk van bijvoorbeeld een live-band gemeten kan worden. Hierdoor is de SPL3 bij uitstek geschikt voor live-optredens waar de band haar eigen apparatuur meeneemt.

The SPL3TS works just like the SPL2TS: the microcontroller continuously measures the input-level and attenuates the output level as much as necessary to keep the sound level below the given threshold.

User convenience
- Simple installation
- Clear settings
- 3 programmable time slots
- Year calendar
- User-friendly interface
- Network connection
- Tablet or computer monitoring
- Automatic reporting
- No driver or software installation

Robust housing
- Technically advanced
- dB(A), dB(C) and dB peak
- LAeq and LCeq with adjustable time
- Linear limiting
- 10 band limiting with EQ
- 10 band EQ
- According to IEC61672-1
- Measurement microphone
- Fraud detection
- 365-day logging
- Optional external display

The CAP21 Advanced sound limiter is specially designed device to act on the sound chain, allowing for the control of levels generated by a music system and preventing regulatory noise protection levels from being exceeded. It acts on the whole audio spectrum and without altering the equalization and sound quality within the premises.

This device supports the connection of two external sensors to register music levels in two different spaces. What’s more, it can remotely send the registered noise levels via telematics and can be connected to an external display to check noise levels on site and show users that they are in a room which isn’t exceeding healthy limits.

The CAP21 Advanced sound limiter boasts optimum sound quality and achieves a powerful level of music with no variations caused by background noise. It’s the highest-rated limiter by today’s most popular DJs, thanks to its frequency response, which can limit sound by bands and maintain optimal audio quality.

The CAP21 Advanced sound limiter is an ideal accessory for soundproofing premises.

Applications: music bars, clubs, pubs, concert halls, theaters, restaurants, etc.