Pied de micro

The GMS 231 HB is a premium-quality microphone stand with thick walled tubing, black powder-coated finish and 175 cm maximum height. The exceptionally stable round base is made of heavy-duty cast iron, while a rubber ring on the bottom ensures acoustic isolation and surface protection. The GMS 231 HB features a new and especially convenient single-handed height adjustment function fitted with a

The MS 23 is a premium-quality microphone stand with thick walled tubing, white powder-coated finish and 160 cm maximum height. The exceptionally stable round base, made of cast iron, is equipped with a rubber bottom to provide acoustic isolation and protect surfaces. For smooth, durable height adjustment, the MS 23ƒ??s handle is made of high-grade ABS with a soft touch, non-slip thermoplastic

The MS 4221 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 74 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.The boom hub features precision 2-point tilt and position adjustment of the 50 cm boom arm. For easy height adjustment the MS 4221 B sports a smo

The MS 4222 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 74 cm maximum height. The folding tripod base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for variable extension to

The MS 4322 is a premium microphone stand which features heavy-duty construction, powder coating and a maximum height of 169 cm. The extremely stable base features a zinc die-cast bell and generously proportioned, precision-folding steel legs with durable rubber caps to protect surfaces. The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick-re

Tours and events often operate under hard conditions and time pressures. Microphone stands are thrown around and not generally treated gently. That's why Gravity Touring series microphone stands are built to be extremely sturdy. Made with especially strong steel tubing with three folding feet. The base and boom mount are made of indestructible die-cast zinc. The solid metal knobs are unlosable, t

Tours and events often operate under hard conditions and time pressures. Microphone stands are thrown around and not generally treated gently. That's why Gravity Touring series telescopic boom microphone stands are built to be extremely sturdy. Made with especially strong steel tubing with three folding feet. The base and boom mount are made of indestructible die-cast zinc. Theboom has an adjust

The industry standard for a mic stand and boom arm combination. Package consists of the 201A/2 microphone stand and the 211 boom arm. Folding base for ease of transport. Long legs for added stability. The 210/2 - a classic for 30 years. More than 2 million sold. - Weight: 3.2 kg, H: 900/1605 mm, BL: 800 mm.

The MS 23 is a premium-quality microphone stand with thick walled tubing, black powder-coated finish and 160 cm maximum height. The exceptionally stable round base, made of cast iron, is equipped with a rubber bottom to provide acoustic isolation and protect surfaces. For smooth, durable height adjustment, the MS 23ƒ??s handle is made of high-grade ABS with a soft touch, non-slip thermoplastic

The GMS 431 HB is a premium quality microphone stand with thick walled tubing, powder coated finish and 179 cm maximum height. The heavy duty tripod base is made of die-cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection.The GMS 431 HB sports a slim, innovative clutch for convenient one-handed height adjustment. The ergonomic desig

The MS 4321 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 169 cm maximum height. The heavy duty tripod base is made of die cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection.The boom hub features precision 2-point tilt and position adjustment of the 79 cm boom arm. For easy height adju

This heavy-duty 35 mm speaker pole sports a male M20 base tube thread and extends from 1.05 to 1.8 m in 7.5 cm increments. It features an unbreakable steel collar, ergonomic set screw knob and safety pin for easy and secure height adjustment. - Heavy-duty steel construction M20 male thread end 1.8 m maximum height

Boom arm:2-piece telescopic design
Boom arm clamping:T-bar locking screw
Boom arm length:from 435 to 745 mm
Height:from 900 to 1,605 mm
Height adjustment:clutch
Leg construction:socket with foldable legs
Material:steel
Product Category:Topline
Rod combination:2-piece folding design
Size when folded:105 x 85 x 985 mm
Special features:stable and sturdy; zinc die-cast base
Threaded connector:3/8"
Type:black
Weight:3.1 kg

Low-level, telescopic stand with foldable legs. Comes with 2-piece boom arm. - Weight: 2.2 kg, H: 425/645 mm, BL: 435/745 mm.

Extra low design for bass drums or special use. Very short and heavy legs provide maximum stability. Legs are foldable for easy transport. Comes with two-piece boom arm 21140. - Weight: 2.98 kg, H: 280 mm, BL: 425/725 mm.

Enabling ultra flexible microphone orientation, this premium quality stand features a 36.5 cm gooseneck on a thick walled 114.5 cm tube and a heavy duty round base made of cast iron.The gooseneck integrates a 3-pin female XLR connector for directly attaching a microphone while the tube sports a lateral XLR mic cable connector at the bottom end. This permits quick, clean setup without mic clips an

The MS 4322 HD is a premium quality microphone stand with thick walled tubing, powder coated finish and 169 cm maximum height. It sports a heavy duty leg collar of die-cast zinc and three weighted folding legs of solid steel with hefty rubber caps for surface protection.The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for va

The Gravity GSP 2472 B is a rugged 35 mm extension rod with practical winding gear for easy raising and lowering of the speaker. It is made of heavy-duty, black powder-coated steel, has a 40 kg load capacity and is height-adjustable from 1.02 m to 1.64 m. The stand is TÇ?V/GS certified. - 35 mm extension rod with M20 screw thread Crank operation for easy raising and lowering of the speaker Hei

The SP 2332 TPB is a 35 mm pole to mount satellite speakers on subwoofers. The heavy duty construction of powder coated steel is height adjustable from 105 to 140 cm. The SP 2332 TPB features an M20 bottom end and steel collar with safety pin to securely lock the extension pole in place. The base tube is a two-piece assembly that can be unscrewed to result in an amazingly short transport length o

Classic one-piece boom arm with 3/8" thread, and sliding adjustment through non-scratching swivel joint. Easy tightening with T-bar locking screw. Complete with locking washer and plastic handgrip. - Weight: 0.7 kg, BL: 800 mm.

Folding, short-legged design with die-cast base. Noiseless height-adjustment. - Weight: 2.0 kg, H: 890/1590 mm.

Perfect presentation and function: this heavy duty, large round base microphone stand is impressive both for the studio and on stage. The robust and tall tubing combination with the slim clutch provide a very tight and secure connection. A full circle anti-vibration rubber damping ring prevents unwanted floor vibration impacting the sound. The formidable base scores additional points for its clea

Microphone stand black with boom arm -

Especially designed for studios and drummers. Taller and longer than most stands. Long legs fold for compact storage and easy transport. - Weight: 5.9 kg, H: 1120/2010 mm, BL: 1065 mm.

Classic tow-piece telescopic boom arm with 3/8" thread. Silent, scratchless swivel joint for adjustment of angle, easy tightening with T-bar locking screw. - Weight: 0.64 kg, BL: 435/745 mm.

The new star in your show!
The avant-garde, one-hand microphone stand is setting new standards in design and function. The elegant combination of triangular-shaped sections and the new design of the slender one-hand adjustment mechanism go harmoniously with standard microphone clips and microphones. The integrated knurled screw is impossible to lose and makes tightening and positioning the micro

The practical one-hand microphone stand ¯Performance® impresses through its reliability and functionality. The stable combination of high quality round-shaped rods and the elegant one-hand adjustment present a harmonious overall appearance. Also in connection with the classic K”nig & Meyer expandable boom, the stand's elegant design is not diminished in any way. With the practical one-hand system