Amplificateurs

-2 channels
-850 watts/ch at 8 Ohms
-1800 watts/ch at 4 Ohms
-2000 watts/ch at 2 Ohms
-4000 watts/ch at 4 Ohms (bridged) - dual power supply

- High performance, lightweight Class-D amplifier
- Higher DSP capabilities - Bandpass filter per channel
- Peakx limiters
- Lockable menu with combination
- Remote power trigger
- XLR, 1/4", RCA Inputs
- 2 x 1050W/2 ohm - 2 x 650W/4 ohm - 2 x 375W/8 ohm - 1300W /8 ohm bridge - 2100W/4 ohm bridge

2O Stereo (per channel) 3,000W
4O Stereo (per channel) 2,100W
8O Stereo (per channel) 1,200W
8O Bridge - Mono 4,200W
4O Bridge - Mono 6,000W

- 4x 3000 W nominal output power for a total of 12000 W (12K44)
- Four ‘Lake Class’ analog inputs with Iso-Float™ ground isolation
- Two AES3 on XLR digital inputs (4 audio channels)
- Eight dual-redundant Dante network audio inputs and outputs
with AES67 support
- Compatible with PLM, Lake, LM Series and D Series
- Rational Power Management (RPM) - Flexible power output
allocation across channels of 12K44 models to match
requirements, enabling more efficient use of amplifier inventory
-16.5 kg
- 3000W 2ohms, 3000W 4ohms, 1900W 8ohms, 950W 16 ohms
3000W Hi-Z 70V, 30000W Hi-Z 100V

- 4 x 5000 W nominal output power for a total of 20000 W (20K44)
- Four ‘Lake Class’ analog inputs with Iso-Float™ ground isolation
- Two AES3 on XLR digital inputs (4 audio channels)
- Eight dual-redundant Dante network audio inputs and outputs
with AES67 support
- Compatible with PLM, Lake, LM Series and D Series
- Copper-finned Intercooler with transverse-mounted
output devices 20k44
- 17 kg
- 4400W 2ohms, 4400W 4ohms, 2300W 8ohms, 1150W 16ohms
3300W Hi-Z 70V, 4700W Hi-Z 100V

- 4x 1250W nominal output power for a total of 5000W
- Four ‘Lake Class’ analog inputs with Iso-Float™ ground isolation
- Two AES3 on XLR digital inputs (4 audio channels)
- Eight dual-redundant Dante network audio inputs and outputs
with AES67 support
- Compatible with PLM, Lake, LM Series and D Series
- Rational Power Management (RPM) - Flexible power output
- allocation across channels of the 5K44 models to match
requirements, enabling more efficient use of amplifier inventory
- 11.4 kg
- max. power: 900W 2ohms, 1250W 4ohms, 1250W 8ohms, 700W 16ohms
1300W hi-Z 70V, 1250W Hi-Z 100V

- Power stereo 4Ohm: 2x 100Wrms
- Power stereo 8Ohm: 2x 70Wrms
- Power bridge 8Ohm: 1x 200Wrms
- Peak limiters: yes
- Freq. Response (+/-1dB): 20-20.000Hz
- Input sensitivity: 0,775V~1,0V~1,44V
- S/N ratio: >100dB
- Weight: 4,5kg
- Dimensions: 483x235x44 (19inch / 1U)

- Power stereo 4 Ohm: 2x 200Wrms
- Power stereo 8 Ohm: 2x 130Wrms
- Power bridge 8 Ohm: 1x 400Wrms
- Peak limiters: yes
- Freq. Response (+/-1dB): 20-20.000Hz
- Input sensitivity: 0,775V~1,0V~1,44V
- S/N ratio: >100dB
- Weight: 4,5kg
- Dimensions: 483x235x44 (19" / 1U)

- Power stereo 4 Ohm: 2x 400Wrms
- Power stereo 8 Ohm: 2x 250Wrms
- Power bridge 8 Ohm: 1x 800Wrms
- Peak limiters: yes
- Freq. Response (+/-1dB): 20-20.000Hz
- Input sensitivity: 0,775V~1,0V~1,44V
- S/N ratio: >100dB
- Weight: 8kg
- Dimensions: 483x265x44 (19" / 1U)

Compacte 1.200 watt 2-kanaals versterker met DSP-regeling voor touring-toepassingen
Laag stroomverbruik met bewezen IDEEA-technologie voor energiebesparing
Geavanceerde DSP met 40 real-time parametrische multi-slope EQ's
100 gebruikerspresets voor systeemconfiguratie en setup
Netwerkbediening via touchscreen gebruikersinterface
AES3 en analoge ingangen met redundante failover
Gerenommeerde Speaker Protect Limiter (maxSPL) voor optimale afstemming op en bescherming van luidsprekers
4-kanaals ingangsmixer voor het mixen en schakelen van meerdere ingangen
Display met achtergrondverlichting, navigatieknoppen en encoder voor instellingen op het frontpaneel
Horizontale output VU-meter op display in bedrijfsmodus
Aansluitingen voor binddraad en luidsprekers
Universele voeding ondersteunt 100 - 240 V bij 50 of 60 Hz
Snelle netwerkinstelling met automatische versterkerdetectie en -identificatie

Product Type: Class D Amplifier with DSP, 4*750w (4ohm) or 2*1500w (100v)
Frequency Response: 20Hz - 20kHz (+0 / -0.5dB)
Audio Signal Inputs: 4 x Analog Unbalanced Inputs | 4 x Analog Balanced Inputs | Stereo S/PDIF
Input Connectors: 4 x RCA | 2 x 6-Pole 3.5mm Phoenix Type | 1 x RCA | 8 x GPIO
Audio Signal Outputs: Stereo S/PDIF
Output Connectors: 1 x RCA | 8 x GPIO
Speakers Output Connectors: 2 x 4-Pole 5mm Phoenix Type
Protections: Short Circuit, DC, Undervoltage, Temperature and Overload Protection
Power Input: AC 100V - 240V 50Hz/60Hz
Update to Firmware 1.4.2 necessary

Product Type: 2U Professional Amplifier
Frequency Response: 15Hz - 25.000Hz (+0 / -1dB)
Input Sensitivity: Selectable (0.77V / 1.0V / 1.44V)
Input Impedance: 10kΩ balanced to ground
Input Connectors: Female XLR-3 and 6,35 TRS jack
Output Connectors: 4 pole Speakon and binding posts
Protections: Full short circuit, open circuit, thermal, soft start, DC, Sub/Ultrasonic and RF
Power Input: 230VAC, 50Hz-60Hz (others by request)

Frequency Response: 15Hz - 25.000Hz (+0 / -1dB)
Input Sensitivity: Selectable (0.77V / 1.0V / 1.44V)
Input Connectors: Female XLR-3 and 6,35 TRS jack
Output Connectors: 4 pole Speakon and binding posts
Protections: Full short circuit, open circuit, thermal, soft start, DC, Sub/Ultrasonic and RF

Power Input: 230VAC, 50Hz-60Hz (others by request)
Dimensions (WxHxD): 483mm x 465mm x 88,8mm
Net Weight: 23.2kg
Shipping Weight: 24.8kg

Product Type: 3U Professional Amplifier
Frequency Response: 15Hz - 25.000Hz (+0 / -1dB)
Amplifier Technology: Class H
Input Sensitivity: Selectable (0.77V / 1.0V / 1.44V)
Input Impedance: 10kΩ balanced to ground
Input Connectors: Female & Male XLR-3
Output Connectors: 4 pole Speakon and binding posts
Protections: Full short circuit, open circuit, thermal, soft start, DC, Sub/Ultrasonic and RF
Power Input: 230VAC, 50Hz-60Hz (others by request)

Product Type: 2U Professional Amplifier
Frequency Response (-6dB): 15Hz - 25.000Hz (+0 / -1dB)
Input Connectors: Female XLR-3 and 6,35 TRS jack
Output Connectors: 4 pole Speakon and binding posts
Protections: Full short circuit, open circuit, thermal, soft start, DC, Sub/Ultrasonic and RF
Cooling Type: Front to back via 2 variable speed fans
Power Input: 230VAC, 50Hz-60Hz (others by request)

-2 channels
-200 watts/ch at 8 Ohms
-300 watts/ch at 4 Ohms
-430 watts/ch at 2 Ohms

- Conception robuste
- 2x 2000W 4 ohms (2x 1200W 8 ohms) puissance max
- Transformateur toroïdal linéaire avec aluminium
- Limiteur de crête à faible distorsion
- Étage de sortie de classe H
- Protection: démarrage progressif, court-circuit, surtension, surintensité, surcharge, sortie CC, température

- Conception extrêmement robuste
- 4x 1400W 4 Ohm (4x 800W 8 Ohm) puissance max
- Amplificateur TrueSound Class D avec MOSFET haute vitesse à courant élevé
- Préampli de qualité studio avec limiteurs TrueRMS VCA
- Transformateur toroïdal amélioré en cuivre
- SOM 3D-Guard contrôlé par MCU (Smart Overheat Management)
- Condensateurs longue durée SuperCharged 105°C
- Dissipateurs thermiques radiaux R:Cool optimisés FEM

-4 Ohms RMS stereo power (minimum): 2 x 150 W RMS
-8 Ohms RMS stereo power: 2 x 80 W RMS
-8 Ohms bridged power (minimum): 1 x 300 W RMS
-Signal-to-noise ratio Less than 90 dB
-Input sensitivity: 4 dBu +/-2 dB
-THD at 1kHz 1/2 rated power Less than 0.1%
-Slew rate: - 65 dB at 1 kHz
-Frequency response (4 Ohms/1 W): +0.5 dB ; 20 Hz-20 kHz

4x 500 Wrms output power - lightweight class-D amplifier - advanced DSP & loudspeaker management - intuitive graphical interface on 2.5" LCD display - pre-loadable loudpseaker & set configurations - unmatched technology and affordability - flexible input and output configuration - XLR & Terminal block source compatibility - RS-232 control and USB loadable configurations

- Conception robuste
- 2x 600W 4 ohms (2x 400W 8 ohms) puissance max
- Transformateur toroïdal linéaire avec aluminium
- Limiteur de crête à faible distorsion
- Étage de sortie de classe H
- Protection: démarrage progressif, court-circuit, surtension, surintensité, surcharge, sortie CC, température
- 14 kg de poids

- The lightweight CLASS-TD amplifier ensures a powerful low combined with clear balanced high frequencies
- 2x 300Wrms @ 8 Ohm / 1x 1100Wrms bridged @ 8 Ohm
- Full protection for professional use
- 2 fan modes
- Powercon input / Combo inputs / Speakon outputs

- 4 x 100W RMS @ 4 OHM Stereo
- 4 x 50W RMS @ 8 OHM Stereo
- 2 x 200W RMS @ 8 OHM Bridge
- Signal to noise ratio > 90 dB
- Class-D
- 4,5 Kg
- DC Short-circuit
- Over heating
- Over load
- Signal limiting
- 482 x 44 x 330 mm
- Input: XLR input & signal linkthrough
-Output: 2-pin Euro Terminal Block (Pitch - 5.08 mm)

- 2 X 150w RMS @ 4 OHM Stereo
- 2 X 80w RMS @ 8 OHM Stereo
- 1 X 300w RMS @ Bridge
- Class D versteker
- 4.100 kg
- 482 x 44 x 330 mm
- DC Short circuit
- Over heating
- Over load
- Signal limiting
- Input XLR female with Male Linkthrough
- Output: Speakon compatible & 2-pin Euro Terminal Block (5.08 mm)

- 2 x 250W RMS @ 4 OHM Stereo
- 2 x 130W RMS @ 8 OHM Stereo
- 500W RMS @ 8 OHM
- Signal to noise ratio > 90 dB
- Class-D
- 4,4 Kg
- DC Short-circuit
- Over heating
- Over load
- Signal limiting
- 482 x 44 x 330 mm
- Input: XLR input & signal linkthrough
-Output: Speakon compatible & 2-pin terminal

- 4 x 250W RMS @ 4 OHM Stereo
- 2 x 130W RMS @ 8 OHM Stereo
- 2 x 500W RMS @ 8 OHM Bridge
- Signal to noise ratio > 90 dB
- Class-D
- 4,7 Kg
- DC Short-circuit
- Over heating
- Over load
- Signal limiting
- 482 x 44 x 330 mm
- Input: XLR input & signal linkthrough
-Output: Speakon compatible & 2-pin terminal

- 2 x 500W RMS @ 4 OHM Stereo
- 2 x 300W RMS @ 8 OHM Stereo
- 1000W RMS @ 8 OHM
- Signal to noise ratio > 90 dB
- Class-D
- 4,7 Kg
- DC Short-circuit
- Over heating
- Over load
- Signal limiting
- 482 x 44 x 330 mm
- Input: XLR input & signal linkthrough
-Output: Speakon compatible & 2-pin terminal

WAVEDYNAMICS? DUAL CHANNEL POWER AMPLIFIER - 2 X 350 WATT

WAVEDYNAMICS? DUAL CHANNEL POWER AMPLIFIER - 2 X 750 WATT

- Lightweight class-D amplifier
- 2,5" LCD display with intuitive user interface
- Optional Dante expansion port (ANI44XT)
- RS232 control
- Speakon compatible & terminal block output connectors
- XLR & terminal block input & linkthrough connections
- Advanced DSP and loudspeaker management
- WaveDynamics speaker & set configurations