-Input voltage:DC12V~24V
-Output current: 5A/ch
-Output power: 12V:<180W, 24V:<360W
-Controller size:L177xW41×H32mm
-Net weight:205g
-Output: 3 channels
-DMX512 standard:DMX512

-Input voltage:DC12V~24V
-Output current: 8A/ch
-Output power: 12V:<384W, 24V:<768W
-Controller size:L140xW50×H27mm
-Net weight:220g
-Output: 4 channels
-DMX512 standard:DMX512

-Input voltage:12-36VDC
-Input current: 30.5A
-Output current: 10A/CH, 3x(12-36)VDC
-Output power: 12V:<360W, 24V:<720W
-Controller size:L175xW80×H45mm
-Net weight:466g
-Output: 3 channels
-DMX512 standard:DMX512

-Input voltage:12-36VDC
-Input current: 32.5A
-Output current: 8A/CH, 4x(12-36)VDC
-Output power: 12V:<384W, 24V:<768W
-Controller size:L175xW80×H45mm
-Net weight:395g
-Output: 4 channels
-DMX512 standard:DMX512

- Working temperature: -20-60° C
- Supply voltage: DC5 - 24V
- External dimension: L249 × W105 × H43mm
- Packing size: 270 x 130 x 45mm
- Net weight: 720g
- Gross weight: 930g
- Static power consumption: <1W
- Output current: each channel 3A
- Output power: 5V:<360W 12V:<864W, 24V:<1728W
- DMX512standard: DMX512/1990
- Channel: 24
- Accessory: XLR x 2pcs

- DMX512 to SPI decoder and RF controller with digital display
- Compatible with kinds of digital IC LED strip, IC type and R/G/B order can be set.
- DMX mode / Stand-alone mode
- Standard DMX512 compliant interface, DMX address display, set dmx address freely.
- 32 programma
- For DSA, three kinds of DMX signal input method, have XLR3 and RJ45 port.

- \nDigital strip controller with SD card reader\n
- Supply voltage :DC7.5-24V
- IC Pixles:2048 pixles Max\n
- Support IC : WS2811,WS2812,WS2813,WS2801,SK6812RGB,SK6812,WWA,
LPD6803,LPD8806,UCS1903,UCS9812,APA102,APA104,TM1803,
TM1804,TM1809,TM1812,TM1914,SM16703
- Download Led edit 2014 for programmation
- dimensions: 144x67x25mm
- Weight: 235g

An 8-port Ethernet pixel controller! The Pixelator Mini may be small, but it’s powerful enough to control up to 8,192 channels (2,730 RGB Pixels) with perfect synchronisation across all eight of its outputs.

ArtNet 1/2/3
sACN
ESP
Kling-Net
8 x PLink output ports on RJ45 (Pixel Link Data)
1 x 10/100Mbps Ethernet port

The PLink Injector converts PLink data from your Pixelator or Pixelator Mini, to allow you to easily control pixel tape or pixel dots from long distances.
Available for 5V, 12V or 24V systems, with power re-injected from an external source.

The PLink Injector converts PLink data from your Pixelator or Pixelator Mini, to allow you to easily control pixel tape or pixel dots from long distances.
Available for 5V, 12V or 24V systems, with power re-injected from an external source.