Grand Class Turntable SL-1300G Black
TEC-SL1300GEK
Direct Drive Turntable System SL-1300G Black
Power supply: AC220-240 V, 50/60 Hz
Energy consumption:
10W (power ON)
0.3W (power OFF)
Dimensions (W x H x D): 453 x 173 x 372 mm
Weight: Approx. 13.0 kg
Operating temperature range: 0℃ to +40℃
Operating humidity range: 35% to 80% RH (no condensation)
1 op voorraad
New generation Grand Class turntable
Hi-Fi turntable with ΔΣ drive, a new motor drive technology that delivers high rotational accuracy and low vibration. The new motor, three-layer platter, and highly rigid chassis of the turntable deliver even better sound quality.
The SL-1300G uses a coreless direct-drive motor without an iron core. This eliminates irregular rotation of the turntable, also known as cogging. Furthermore, the dual-rotor construction reduces bearing loads while maintaining high torque. Even small vibrations during rotation are reduced. Furthermore, the SL-1300G's motor has been redesigned to eliminate subtle vibrations that can affect sound quality. To improve rigidity, the same reinforcement pattern as the Reference Class SL-1000R/SP-10R has been used for the base of the coil mount.
Drive method: Direct drive
Engine: Brushless DC motor
Record player speeds: 33-1/3, 45, and 78* rpm
* The turntable speed is 78.26 rpm when set to 78 rpm.
Starting torque: 0.32 N m (3.3 kgf cm)
Construction features: 0.7 s. from standstill to 33-1/3 rpm
Brake system: Electronic brake
Wow and flutter: 0.025% WRMS
Record player platter:
Brass and aluminum die-cast combined
Diameter：332mm
Weight: approx. 3.6kg (including a rubber plate)
Tonearm section
Type: Static balance
Effective length: 230mm
Overhang: 15mm
Tracking Error angle:
Within 2° 32' (on the outer groove of the 30 cm plate)
Within 0° 32' (on the inner groove of the 30 cm plate)
Offset angle: 22°
Arm height adjustment range: 0 - 6mm
Needle pressure setting range: 0 - 4 g (direct reading)
Headshell weight: Approx. 7.6 g
Applicable cartridge weight range:
5.6 - 12.0 g (without additional weight)
14.3 - 20.7 g (including main body)
10.0 - 16.4 g (with small additional weight)
18.7 - 25.1 g (including main body)
14.3 - 19.8 g (with large additional weight)
23.0 - 28.5 g (including main body)
Mounting cartridge dimensions: 12.7 mm (1/2") interval
Head shell cable slot: 1.2mm φ 4-pin cable lug
Connections
Audio output:
PHONO (Pin Jack) x 1
EARTH TERMINAL x 1
Accessories:
Turntable, turntable top, dust cover, EP record adapter, balance weight, auxiliary weight, main housing, overhang gauge, cartridge screw set, PHONO cable, PHONO ground cable, power cord, turntable screw set, user manual.