Semi-open, circum-aural dynamic stereo, headphones, mini XLR connector

-Audio frequency bandwidth: 60 - 20000 Hz
-Equivalent noise level: 31 dB-A
-Sensitivity: 5 mV/Pa
-Signal to Noise: 63 dB-A
-Electrical impedance: 200 Ohms
-Recommended load impedance: 2000 Ohms
-Polar Pattern: Cardioid

Hypercardioid speech optimized

- Condenser vocal microphone for female vocalists
- Slender and elegant silhouette
- XLR connector module with 24-carat gold plated pins for optimized connectivity
- 24-carat gold plated transducer case for optimum conductivity and resistance to corrosion and humidity
- Spring steel wire-mesh grill for extreme ruggedness incl. reliable control of pops and wind noise

30 cm gooseneck with integrated 3-pin XLR phantom power adapter, programmable mute switch

General Specifications:
Headphone type: semi-open
Audio frequency bandwidth: 18 - 22500 Hz
Sensitivity headphones: 114 dB SPL/V
Rated Impedance: 55 Ohms
Detachable cable: no
Cable Length: 3 m
Earpads replaceable: yes

Audio Interface:
TypeStereo plug – 3.5mm (1/8") with 6.3 mm (1/4”) screw-on adapter
Gender: Male
Contacts: 3-pin
Interface finish: Gold

Cable
Fixed: Yes
On-ear: Yes
Studio Mixing: Yes
Hi-Fi Listening: Yes
Foldable: Yes
Semi-open: Yes

Headphone type: closed-back
Transducer size: 40 mm
Sensitivity headphones: 114 dB SPL/V
Rated Impedance: 32 Ohms
Detachable cable: yes
Cable Length: coiled 5 m
Earpads replaceable: yes
Driver size (mm): 40
Sensitivity (dB SPL/V @ 1 kHz): 114
Rated impedance (O): 32
Audio frequency bandwidth (Hz): 18 - 26000
Cable(s) length (m): 5

Universal shockmount

Available as D 5 or C 5 version with the outstanding AKG sound - Maximized rejection against feedback
Improved handling noise sensibility
Spring Steel elastic wire mesh cap for safe protection of the capsule element
New rugged finish for professional applications
Easy configuration through optimized Infrared data download from receiver
Lowest operating costs: Up to 8 hours with ONEBatte

Closed-back, high performance headphones with solid bass for studio, rehearsal & live applications

- Microfoon type: condensor
- Ergonomisch geoptimaliseerde hoofdband achteraan
- Met zweetdruppelring
- Externe elastische ophanging met hoge demping van structuurgeluid
- Polair patroon: cardioïde
- Frequentiebereik: 20-20.000 Hz
- Onbelaste transmissiefactor: 40 mV/Pa (-28 dBV)
- Limiet geluidsdrukniveau: (k=1%) 126 dB
- Equivalent geluidsdrukniveau: 22 dB-A
- Signaal-ruisverhouding (A-gewogen): 72 dB
- Elektrische impedantie: 200 Ohm
- Aanbevolen belastingsimpedantie: >2.000 Ohm
- Voedingsspanning: 1-10 V
- Stroomverbruik: <2 mA
- Aansluiting: 3-pins XLR connector
- Kabel: 1,5 m
- Afwerking oppervlak: mat zwart
- Afmetingen: 145 x 110 x 70 mm
- Nettogewicht: 30 g
- Brutogewicht: 261 g

-Audio frequency bandwidth: 60 - 20000 Hz
-Equivalent noise level: 31 dB-A
-Sensitivity: 5 mV/Pa
-Signal to Noise: 63 dB-A
-Electrical impedance: 200 Ohms
-Recommended load impedance: 2000 Ohms
-Polar Pattern: Cardioid

-Audio frequency bandwidth: 60 - 20000 Hz
-Equivalent noise level: 31 dB-A
-Sensitivity: 5 mV/Pa
-Signal to Noise: 63 dB-A
-Electrical impedance: 200 Ohms
-Recommended load impedance: 2000 Ohms
-Polar Pattern: Cardioid

General Specifications:
Audio frequency bandwidth: 20 - 20000 Hz
Equivalent noise level: 20 dB-A
Sensitivity: 14 mV/Pa
Signal to Noise: 74 dB-A
Electrical impedance: 600 Ohms
Recommended load impedance: 2000 Ohms
Polar Pattern: Omnidirectional

Powering Interface:
Voltage: 9 to 52 V
Current: 3 mA

matte dark gray
Audio output type: Modular Series Standard

Flat table tripod, anthracite, diameter 11.5 cm, 760 g

Stand adaptor for AKG blue line series

-Type: Pre-polarized condenser transducer
-Polar Pattern: Figure of eight
-Audio frequency bandwidth: 10 - 18000 Hz
-Sensitivity: 2 mV/Pa
-Electrical impedance: 200 Ohms
-Recommended load impedance: 1000 Ohms
-Max. SPL for 1%/3% THD: 96 dB / 103 dB
-Current consumption: approx. 2.2 mA

The Studio version of these classic hi-fi stereo headphones uses XXL speakers with Varimotion diaphragms for higher sensitivity, a wider dynamic range, and higher sound levels. Other features include semi-open earphones, a solid bass range, clear highs, and excellent comfort. Also connects to portable equipment (CD players, DAT recorders, notebook computers, etc.)

-Audio frequency bandwidth: 60 - 20000 Hz
-Equivalent noise level: 31 dB-A
-Sensitivity: 5 mV/Pa
-Signal to Noise: 63 dB-A
-Electrical impedance: 200 Ohms
-Recommended load impedance: 2000 Ohms
-Polar Pattern: Cardioid

Mix and master your tracks with uninhibited clarity with the AKG K92 over-ear, closed back headphones. Professional-grade 40mm drivers reveal even the subtlest nuances, so you can be confident your mix will translate accurately on any system. Whether you’re fine-tuning track levels within the mix or mastering the final product, the self-adjusting headband and lightweight design will provide hours

Phantom power adapter with XLR connector for L type MicroMic microphones with integrated bass roll-off switch.