Filter Installatie

-outside diameter: 258 mm
-depth: 157 mm
-cutout: 232 mm
-installation grip range: 3 - 65 mm
-woofer size: 6.5 inch
-tweeter size: 1 inch
-transformer power taps
-100V: 60 - 30 - 15 - 7.5 W
-70V: 60 - 30 - 15 - 7.5 - 3.75 W
-low impedance dynamic power: 120 W
-low impedance RMS power: 60 W
-SPL 1W/1m: 91 dB
-max SPL 1m: 110 dB
-frequency response: 65 - 20K Hz
-indoor

-dimensions: 164 x 136 x 155mm
-loudspeaker system: 2-way
-woofer size: 5.25 inch
-tweeter size: 1 inch
transformer power taps:
-100V: 30 - 15 - 6 - 3W
-70V: 30 - 15 - 7.5 - 3 - 1.5W
-impedance (ohms): 16
-low impedance dynamic power: 80 watts
-low impedance RMS power: 50 watts
-SPL 1W/1m: 92 dB
-frequency response: 94 - 20K Hz
-IP40
-weight: 2.05kg

-dimensions: 144 x 144 x 238 mm
-loudspeaker system: 2-way
-woofer size: 4,25 inch
-woofer cone material: coated paper
-tweeter size: 1 inch
-mounting system: clickmount
-100V transformer power taps: 20 - 10 - 5 - 2.5W
-70V transformer power taps: 20 - 10 - 5 - 2.5 - 1.25W
-low impedance dynamic power: 70W
-low impedance RMS power: 50W
-SPL 1W/1m: 89 dB
-80 - 20k Hz
-weight: 1.85 kg

-dimensions: 144 x 144 x 238 mm
-loudspeaker system: 2-way
-woofer size: 4,25 inch
-woofer cone material: coated paper
-tweeter size: 1 inch
-mounting system: clickmount
-100V transformer power taps: 20 - 10 - 5 - 2.5W
-70V transformer power taps: 20 - 10 - 5 - 2.5 - 1.25W
-low impedance dynamic power: 70W
-low impedance RMS power: 50W
-SPL 1W/1m: 89 dB
-80 - 20k Hz
-weight: 1.85 kg

-dimensions: 198 x 190 x 328 mm
-loudspeaker system: 2-way
-woofer size: 6,5 inch
-woofer cone material: coated paper
-tweeter size: 1 inch
-mounting system: clickmount
-100V transformer power taps: 60 - 30 - 15 - 6 W
-70V transformer power taps: 60 - 30 - 15 - 7.5 - 3 W
-impedance (ohms): 16
-low impedance dynamic power: 200W
-low impedance RMS power: 150W
-SPL 1W/1m: 90 dB

-dimensions: 198 x 190 x 328 mm
-loudspeaker system: 2-way
-woofer size: 6,5 inch
-woofer cone material: coated paper
-tweeter size: 1 inch
-mounting system: clickmount
-100V transformer power taps: 60 - 30 - 15 - 6 W
-70V transformer power taps: 60 - 30 - 15 - 7.5 - 3 W
-impedance (ohms): 16
-low impedance dynamic power: 200W
-low impedance RMS power: 150W
-SPL 1W/1m: 90 dB

Type : 2-way HiFi Pro, bass reflex
- Cabinet : MDF Wood
- Woofer : 8i
- Tweeter : 1i
- Impedance : 8Ohm
- RMS Power 8ohm
- AES : 200W
- Music: 300W
- Protection : Auto-Reset
- SPL 1W: 93dB
- SPL Max: 124dB
- Freq. range : 60 Hz-20 kHz
- Connector : Speakon / Speakon
- IP40
- Mounting points Back : 2, Top/Bottom : 1/1, Left/Right : 2/2
- HxWxD : 411 x 250 x 250 mm
- Weight : 8.1 Kg

- 19" rack mounting, 2U
- Depth (build in): 290 mm
- Depth (incl front): 305 mm
- Power supply: 100 - 240 VAC
- Power consumption (max): 30 Watts
- Zone outputs: 2 stereo
- Signal to noise level SNR (dB): >97
- Total harmonic distortion THD (%): <0.2
- Crosstalk (dB): >70
- MIC inputs balanced: 2
- Phantom power voltage: 48 volts
- Line input unbalanced: 4
- 20 - 25 k Hz

output power RMS 100 volts 2 x 60 watts
output power RMS bridged 100 volts 120 watts
minimum impedance load per channel 4 ohms
minimum impedance load bridged per channel 8 ohms
power consumption (max) 175 watts
19" rack mounting, 1U
depth (build in) 230 mm
depth (incl front) 239 mm
power supply 115 - 230 VAC
output channels 2
line input (un)balanced 2
50 - 20 k Hz
weight 5.7 kg

Power amp topology: Class-D
Output channels: 4
Output power RMS 4 ohms: 4 x 240 watts
Output power RMS bridged 8 ohms: 2 x 480 watts
Sine wave capability: 500ms at full RMS output power
Minimum load impedance: 4 ohms
Minimum load impedance bridged: 8 ohms
Output power RMS 100 volts: 4 x 240 watts
Output power RMS 100 volts bridged: 2 x 480 watts
Line input(s) balanced: 4 Euroblock

dimensions 352 x 450 x 700 mm
loudspeaker system dual coil
woofer size 2 x 10 inch
impedance (ohms) 4 or 16
low impedance dynamic power 600 watts
low impedance RMS power 300 watts
SPL 1W/1m 99 dB
frequency response 45 - 150 Hz
IP20
weight 29.20 kg

-Input Connections: XLR female balanced (Mic, channels 1-3); RCA unbalanced (Line Inputs 1-6, Left & Right); 1/4-inch TRS unbalanced stereo (Bus Inputs, Zone 1 & 2)
-Output Connections: 1/4-inch TS unbalanced (Zone 1 & 2 Out, Left & Right)
-Input Impedance: 4k Ohms (Mic), 10k O (Line), 10k O (Bus)
-Output Impedance: 200 Ohms (Zone 1 & 2)

This inwall loudspeaker is flatter and even less visible than all its predecessors. The frame was reduced to just one millimeter, yet continues to score high in terms of vibration absorption. The loudspeaker's grill has also been noticeably fine-tuned and almost feels like silk to the touch. The sound is accurate, warm and carries far. A no-bones-about-it speaker.

-2 Independent Zones, each with balanced XLR-output (+unbalanced on cinch)
-Each zone has 3band tone controls, balance, volume and mono/stereo switch
-11 inputs on 5 Channels (5 balanced mic + 4line + 2phono)
-1Microphone with 3band tone control and zone assignable adjustable talkover.
-Every Channel can be assigned to zone A, zone B or both

-Dimensions (cm): 48.2 x 4.4 x 33 cm
-Weight (kg): 4
-Powerinput: AC 100 - 240V, 50/60Hz
-Power consumption W: 10
-Display: LCD
-Fixation: 19" rack mountable
-RU: 1U
-IP rating: indoor
-Supported audio formats: MP3, WMA
-Supported audio media: CD, USB
-Input: IEC, USB
-Output: RCA

De Aerobix is voorzien van:
2 microphone ingangen met op de achterkant individueel instelbare "auto talk-over"
Individuele volume controls.
Met schroevendraaier instelbare gezamenlijke bas en treble control.
Aansluitingen 2x 6.3mm Jack op de voorkant, 2x XLR 3 op de achterkant.
2 stereo RCA(tulp) lijn ingangen
Music mute schakelaar op de voorkant.

Newhank BDP 432-RS 1U
19” Rack Solution for Playback of Blu-rays and other popular Media Formats from Disk or USB.
Equipped with a second generation RS-232 control port that accepts separate commands for on and off.

Checkmate is a stereo audio source including FM tuner, USB slot, SD slot and Bluetooth reciever. Checkmate has an unbalanced and balanced set of stereo outputs on the rear and a headphone output (jack) with volume control in front panel. IR remote control, FM antenna, 2x RCA cables and rack-mount bracket are included.

NewHank MP103MK2 USB is the perfect updated solution for the playback of WAV and MP3 files from CD, CDR, CDRW and USB media.
Pitch control with pitch bend, master tempo, seamless looping and 40 seconds shock memory.
Improved USB player for WAV and MP3 as you can now play one file and search and cue the next one..

-outside diameter: 210 mm
-depth: 80 mm
-cutout: 186 mm
-installation grip range: 2-25 mm
-loudspeaker system: 2-way
-woofer size: 6.5 inch
-woofer cone material: polypropylene
-tweeter size: 1 inch
-transformer power taps
-100 V: 20 - 10 - 5 watts
-70 V: 20 - 10 - 5 - 2.5 watts
-impedance: 16 ohms
-low impedance dynamic power: 60 watts
-low impedance RMS power: 30 watts

Type : 2-way HiFi Pro
- Woofer : 6.5"
- Tweeter : 1"
- Impedance : 16 ohm / 100V
- SPL 1W : 92 dB
- Max SPL : 105 dB
- Power taps : 2,5 - 5 - 10 - 20W
- Frequency range : 60Hz-20kHz
- Dispersion @ 1-4-8KHz : 180°-80°-45°
- IP54
- Dimensions : Cut out : 183 mm, Outside : 205 mm, Depth : 80 mm
- Weight : 1.62 kg

-Type : 2-way HiFi Pro
-Woofer : 6.5" - Tweeter : 1"
-Impedance : 16 ohm / 100V - SPL 1W : dB
-Max SPL : 105 dB - Power taps : 1,5-3-6W
-Frequency range : 60Hz-20kHz
-Dispersion @ 1-4-8KHz : 180°-80°-45°
-IP54
-Dimensions : Cut out : 183 mm, Outside : 205 mm, Depth : 80 mm
-Weight : 1.6 kg

-dimensions: 131 x 109 x 125mm
-loudspeaker system: full range
-woofer size: 3 inch
transformer power taps:
-100V: 10 - 5 - 2.5W
-70V: 10 - 5 - 2.5 - 1.25W
-impedance (ohms): 16
-low impedance dynamic power: 40 watts
-low impedance RMS power: 25 watts
-SPL 1W/1m: 89 dB
-frequency response: 94 - 20K Hz
-IP40
-weight: 1.18kg

19" rack mounting, 1U
depth build in 305 mm
depth incl front 315 mm
power supply 230 VAC
FM tuner
DAB Tuner/DAB +
CD
USB&SD card 32 GB up to 9999 songs
supported file format MP3, WMA
Bluetooth
unbalanced outputs 2 x RCA + COMBI RCA
other/digital outputs 1 x optical + 1 x coaxial
IR remote included
weight 4.6 kg

output power RMS 100 volts 2 x 120 watts
output power RMS bridged 100 volts 240 watts
minimum impedance load per channel 4 ohms
minimum impedance load bridged per channel 8 ohms
power consumption (max) 300 watts
19" rack mounting, 1U
depth (build in) 230 mm
depth (incl front) 239 mm
power supply 115 - 230 VAC
output channels 2
line input (un)balanced 2
50 - 20 k Hz
weight 6.1 kg

-Frequency: 2.5 kHz
-Type: Passive built-in
-HF: 1"
-LF: 3"
-Range (-10 dB): 60 Hz - 20 kHz
-Response (± 3 dB): 90 Hz - 18 kHz
-Impedance: 8 Ohms/ 100V
-Line Transformer Tappings: 1: 20 W / 500 Ohms; 2: 10 W / 1000 Ohms; 3: 5 W / 2000 Ohms
-IP40
-Max. Power: 60 W
-Sensitivity (1W/1m): 85 dB

PA Amplifier - 100V versterker - AMPLI MIXEUR MONO 20WMAX PA

Connect analog audio equipment to a Dante® network
Feed non Dante® ready amplifiers, speakers or mixing desks with signals from the Dante® network
AES67 compliant
Improved Audio Parameters
Enhanced ESD ProtectionLED Ring for Status IndicationExtremely robust and compact design for rugged stage conditionsRack mountable

- 30W rms @ 100 volt or 4 Ohm
- intuitive user interface
- ground breaking, logic and sheer rear panel
- prominent, illuminated, bigger Volume control
- compact 9.5" housing
- 1 mic/line input and 2 stereo line, mono summed inputs
- smart left-to-right 4 level priority and rear panel design
- emergency input
- paging mic with chime
- 24VDC override output