• Bekafun
  • Ecler 4 inputs/4 outputs DANTE (Audio Over IP) Break Out Box. It allows to convert 4 analogue audio signals into 4 DANTE channels and send them into an Ethernet LAN, as well as to take 4 DANTE channels from the Ethernet network and convert them to an

Ecler 4 inputs/4 outputs DANTE (Audio Over IP) Break Out Box. It allows to convert 4 analogue audio signals into 4 DANTE channels and send them into an Ethernet LAN, as well as to take 4 DANTE channels from the Ethernet network and convert them to an

ECL-DN44BOB

Ecler 4 inputs/4 outputs DANTE (Audio Over IP) Break Out Box. It allows to convert 4 analogue audio signals into 4 DANTE channels and send them into an Ethernet LAN, as well as to take 4 DANTE channels from the Ethernet network and convert them to an


€ 1.481,04
prijzen incl. taksen en BTW

Tijdelijk niet op voorraad

DN44BOB is a 4 inputs and 4 outputs DANTE (Audio Over IP) Break Out Box. It allows to convert 4 analogue audio signals into 4 DANTE channels and send them into an Ethernet LAN, as well as to take 4 DANTE channels from the Ethernet network and convert them to analogue audio signals. It includes 4 GPI control ports (0-10VDC) and 4 GPO control ports (NO/NC relays). Can be used together with EclerNet DANTE ready products or as a stand-alone DANTE interface, together with any audio device including analogue audio inputs and/or outputs.

Specs

DIGITAL ENGINE

Processor

32 bit, 44.1/ 48 / 88.2 / 96 kHz

AUDIO CONVERTERS

Sampling rate

44.1/ 48 / 88.2 / 96 kHz - TBC

Resolution

24 bit AKM

Latency

1ms (fs = 48kHz)

Frequency response

5Hz to 24kHz (-3dB)

Dynamic range

AD:110dB; DA: 115dB

ANALOGUE AUDIO INPUT PORTS

Number of input ports

4, MIC/LINE

Connection type

Phoenix connector (Symmetrical)

Input sensitivity

-50dBV to +10dBV in 0.5dB step

Input impedanc

Balanced, >4kΩ

Max input level

+27dBV = +30dBu

THD + Noise

THD+Noise @ 1kHz, 0dBV input (line) <0.004%

THD+Noise @ 1kHz, -40dBV input (mic.) <0.008%

CMRR

65dB typ.

Phantom power

+18VDC, 5mA max. software switched

ANALOGUE AUDIO OUTPUT PORTS

Number of output ports

4, Line

Connection type

Phoenix connector (Symmetrical)

Max output level

+18dBV = +21dBu

Crosstalk

Better than 90dB (100dB typ.)

AUDIO OVER IP

Protocols

Dante™ / AES67

Number of digital input ports

4

Number of digital output ports

4

Interfaces

1 x RJ45

CONNECTIVITY

Ethernet

1, RJ-45. Ethernet Base-Tx 10/100Mb; Auto X-Over CAT5 up to 100m

Programing and control

EclerNet manager (software) from v3.05r2 version

REMOTE CONTROL CONNECTIONS

Digital remote controls

8, Euroblock connector

GPIs

4, from 0 to 10VDC or TTL level

GPOs

4, 3 poles isolated relay; 1A, 48 VDC max

ELECTRICAL

Power supply

DC supply ± 24 VDC

AC mains requirement

100-240VAC + External PSU 24VDC

AC mains connector

TBC

Power consumption

6.5 W

PHYSICAL

Operating temperature

Min: -10°C ; 14°F

Max: 40°C ; 104°F

Operating humidity

<85% HR

Storage temperature

Min: -10°C ; 14°F

Max: 40°C ; 104°F

Storage humidity

<90% HR

Installation options

19" rack format (1RU)

Included accessories

Rack-mount kit included: 1UHRMKIT + PUM3 Rack-mount accessories to mount 2 half-width RU devices in 1 standard width RU space or to mount 1 half- width RU device in 1 standard width RU space

Optional accessories

WPa series control panels for remote control

Dimensions

241 x 44 x 152 mm / 9.49 x 1.73 x 5.98 in. (WxHxD)

Weight

1.1 kg / 2.43 lb

Shipping dimensions

220 x 50 x 410 mm / 8.66 x 1.97 x 16.14 in. (WxHxD)

Shipping weight

1.4 kg / 3.09 lb