WiSpeak CUBE is a self-powered 5" loudspeaker cabinet with wireless audio reception and control capabilities under the control of the Master unit, featuring an installation system which is compatible with ceiling light rails. Alternatively, wall mount or desktop installation is as well possible by means of the included accessories.

Specs

WiS (RF WIRELESS DIGITAL AUDIO)

Frequency band

U-NII 5.1 – 5.8GHz (supported worldwide)

Up to 24 non-overlapping RF channels

DFS support

Coverage range

Up to 12m from a TX to any paired RX, direct line of sight

Audio channels

WiSpeak CH1 / CH2

Audio transmission

24bit uncompressed, 48kHz SR

Digital Audio Sample size

24 bits

Digital Audio Sampling rate

48 kHz

Digital Audio Frequency Response

20Hz – 20kHz (-0.1dB)

Digital Audio converters

DAC Resolution: 24 bit

DAC Dynaimic range: 100dB

Latency

From TX IN to RX AUX OUT <6ms

From TX IN to RX Speaker <6ms

Jitter among receivers ±1us

Pairing time

Up to 120s

Reconnection time

Up to 120s

SYSTEM

Effective Freq. Range

70 - 20kHz

Coverage angle

150x150 (HxV)

Sensitivity

83 dB (1W/1m)

Maximum SPL

98 dB continuous / 104 dB peak

TRANSDUCERS

Ways

2 ways

Low frequency driver

5" woofer

High frequency driver

1" tweeter

Nominal impedance

8Ω

POWERED

Power

32 W RMS / 128 W Peak

Audio inputs

CH1 / CH2: Digital, Mono, RF Wireless Audio

Audio outputs

Internal Loudspeaker: Analog, Mono, Self powered

AUX OUT: Analog, Mono, Balanced, Euroblock

THD + Noise

<0.15% @ 1kHz Full power

Signal Noise Ratio

>95dB at RX AUX OUT

Input sensitivity

0dBV / 10kΩ

ELECTRICAL

Power supply

Universal, internal power supply

AC mains requirement

100-240VAC @ 50-60Hz

AC mains connector

From lighting rail bracket, or standard 2-pin AC plug

Power consumption

15 W (rated)

MONITORING AND CONTROL

Volume control

via WiSpeak grip app.

Other controls

SOLO: via WiSpeak grip app

ID TEST SIGNAL: via WiSpeak grip app

PAIR / UNPAIR: via WiSpeak grip app and Panel button

LED Indicators

WiS and STR LEDs

Programing and control

via WiSpeak grip app.

PHYSICAL

Connection type

Standard 2-pin connector for VAC

Installation options

Surface, desktop, shelf, table, etc. Or in a ceiling light rail.

Certifications

FCC, EMC, CB

Enclosure material

ABS cabinet

Grille material

Aluminium

Mounting system

Lighting rail mount compatible

Pan and tilt wall-mount

Swivel (pan & tilt)

Rail fixing system

4 wire 3 circuit track system

Compatible rail systems

Global Track Pro or compatibles

Operating temperature

Min: -10°C ; 14°F

Max: 40°C ; 104°F

Operating humidity

<85% HR

Storage temperature

Min: -10°C ; 14°F

Max: 40°C ; 104°F

Storage humidity

<90% HR

Included accessories

Lighting rail mount, Surface / wall mount

Finished colour

White (RAL 9003) or black (RAL 9005)

Dimensions

173 x 180 x 181 mm / 6.81 x 7.09 x 7.13 in. (WxHxD)

Weight

2.1 kg / 4.6 lb

Pieces per box

1 unit

Shipping dimensions

320 x 260 x 220 mm / 12.6 x 10.24 x 8.66 in. (WxHxD)

Shipping weight

3.2 kg / 7.05 lb