Active Subwoofer with 7,1 High Definition Bass Management?, 10" driver, magnetic

10“ Subwoofer (paper)
Amp. Power RMS: 130 W
Frequency Response: 28 Hz - 120 Hz
Max. SPL at 1 m: =104 dB
Optimized for T Series studio monitors

- U-ART 1.9" Accelerated Ribbon Tweeter with HPS Waveguide
- Polypropylene 5" woofer and rear-firing bass-reflex port
- Cumulated Amp. Power RMS: 70 W
- Frequency Response: 45 Hz - 25 kHz
- Max. SPL Per Pair at 1 m: =106 dB

- U-ART 1.9" Accelerated Ribbon Tweeter with HPS Waveguide
- Polypropylene 7" woofer and rear-firing bass-reflex port
- Cumulated Amp. Power RMS: 70 W
- Frequency Response: 39 Hz - 25 kHz
- Max. SPL Per Pair at 1 m: =110 dB

- U-ART 1.9" Accelerated Ribbon Tweeter with HPS Waveguide
- Polypropylene 8" woofer and rear-firing bass-reflex port
- Cumulated Amp. Power RMS: 70 W
- Frequency Response: 39 Hz - 25 kHz
- Max. SPL Per Pair at 1 m: =110 dB

The SC204 are the smallest speakers in our studio monitors line. And they were built with quality in mind.\n\nIf you are working at home, or in a music or post-production studio, a small pair of monitors should not compromise the quality of your results. It should serve as a second pair of ears. The SC204 may have a small footprint. But don't let their size deceive you, these monitors sound bigger

Second in line in our studio monitors is the SC205. Like the name implies, it's a SilverCone two-way system with a 5" woofer. But don't let your eyes deceive you. The SC205 might seem like a small speaker, but it definitely packs a punch. With an extended bass frequency response and an astounding output level, the SC205 will easily fill your room with exceptional sound.\n\nThe SC205 also comes with

The SC207 is our mid-range two-way monitor speaker. The SC207 will be attractive to a large range of listeners, as its size and form factor make them appropriate for a lot of different rooms.\n\nAre you a home recording musician or producer? Not a problem. The SC207 has great power efficiency that will let you clearly examine what's happening in your music. Are you a post production professional wo

Do you need to hear a tight and full frequency bass in your mixes but don't want to invest in a subwoofer just yet? Then the SC208 is probably for you. It's the last in our two-way system series, starting with the smaller SC204.\n\nIt features the same ease of use and detailed timbre reproduction of all other two-way monitors. But with a larger woofer and more powerful amplifiers, the SC208 will pr

- Fully-fledged 4-way midfield / main monitor
- Proprietary RS3.1 Air Motion Transformer
- 4-inch glass-fibre honeycomb woofer
- twin 6,5-inch low frequency drivers with glass-fibre coated honeycomb membrane
- Bass reproduction down to 32Hz
- Max output level 126dB SPL @ 1m, half space, pair
- Sophisticated cabinet with bevelled ultra-stiff front plate
- 4 x 250 W Class D amplifiers

- Low directivity tweeter for a flexible listening position
- Designed without a port allowing it to be placed near a wall
- Numerous settings for optimal integration
- Accurate control, even in the very high end
- Flax sandwich cone: controlled and articulated bass, natural and detailed lower mid-range and upper mid-range registers
- Threads for ceilling and wall mounts (fastening accessori

- Low directivity tweeter for a flexible listening position
- Designed without a port allowing it to be placed near a wall
- Numerous settings for optimal integration
- Accurate control, even in the very high end
- Flax sandwich cone: controlled and articulated bass, natural and detailed lower mid-range and upper mid-range registers
- Threads for ceilling and wall mounts (fastening accessori

- Low directivity tweeter for a flexible listening position
- Designed without a port allowing it to be placed near a wall
- Numerous settings for optimal integration
- Accurate control, even in the very high end
- Flax sandwich cone: controlled and articulated bass, natural and detailed lower mid-range and upper mid-range registers
- Threads for ceilling and wall mounts (fastening accessori

- Tweeter with very low directivity for a flexible sweet spot
- Designed without a port (double passive radiator) allowing it to be placed near a wall
- 2.5 channels to provide optimal control of bass and low mid-range registers
- Numerous settings for optimal integration
- Accurate control, even in the very high frequencies
- Flax sandwich cone

-Frequency response: 40Hz - 40kHz
-Maximum SPL: 113dB SPL (peak @ 1m)
-Inputs: Electronically balanced / 10 kOhms, XLR, Adjustable, +4dBu or -10dBV
-Bass - Midrange: 150W rms, BASH technology
-Treble: 100W rms, class AB
-Woofer 6W4370B, 61/2" (16.5cm) Focal "W" composite sandwich cone drivers

Omgekeerde beryllium koepeltweeter: zeer lage directiviteit, uitstekende lineariteit en dynamiek
Geoptimaliseerde tweeter met baffle: uitstekende dispersieregeling
Samengestelde sandwich W-conus: geluidsneutraliteit, geen vervorming
Focus mode: twee monitors in één; 2-weg monitor en 1-weg full-range monitor (alleen woofer)
Grote basreflexpoort: geen poortruis of vervorming
Stand-by modus kan automatisch worden uitgeschakeld
Instellingen: in-/uitschakelbaar, LF-helling, HF-helling, LPF @ 160Hz

Frequency response: 49 Hz – 22 kHz (+/-3dB)
Crossover frequency: 2.5 kHz
Low-frequency amplifier power: 40 watts
High-frequency amplifier power: 30 watts
Signal-to-noise: > 100 dB (typical A-weighted)
Polarity: Positive signal at + input produces outward LF one displacement
Input impedance: 20 k ohms balanced, 10 k ohms unbalanced

The KH 120 A studio monitor is designed for use as a near-field loudspeaker or as a rear loudspeaker in larger multi-channel systems. The KH 120 A represents the latest in acoustic and electronic simulation and measurement technologies to ensure the most accurate sound reproduction possible. It has a Mathematically Modeled Dispersion waveguide (MMD (TM), flexible acoustical controls, analog class

/ Analog 3-way monitor, left version, 8,25" + 3" + 1" drivers (per piece)

/ Analog 3-way monitor, right version, 8,25" + 3" + 1" drivers (per piece)

-Computer-modeled cabinet design using Low Resonance Integral Molding (LRIM) materials
-Extraordinary bass depth (26 Hz) with high sound pressure (122.4 dB)
-Precise dispersion in the midrange and high frequencies
-As a stereo system with KH 750 DSP and iPad app, controllable and alignable to the room

- 10" woofer
- Output power: 256W
- Freq resp: 16 - 800 Hz ( ±6 dB free field)
- Max SPL: 105.0 dB
- Ideal choice for smaller rooms and smaller studio monitors
- Flexible 2.0/0.1 Bass Manager
- Setup, Align, and Operate with Neumann.Control for iPad

- 4" + 1" drivers
- 130 + 70 W Output power
- Freq respons: 53 Hz - 22 kHz, ± 6 dB (-6 dB free field)
- Max SPL: 108.8 dB SPL
- Low latency DSP engine (2ms)
- Setup, align and operate with Neumann.Control fo iPad
- Delivers excellent detail in every surrounding

- 5,25" woven composite low-frequency transducer
- 1" (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- Front-firing acoustic port for superior bass-frequency reproduction
- Optimized, resonance-suppressing internal bracing
- 102 dB maximum continuous SPL
- HF Adjust (±6 dB, continuously variable)
- Midrange Adjust (±6 dB, continuously variable)
- Acoustic Space settings (flat, -2, -4 dB) for accurate mixing contour
- Highpass filter (Off, 80 Hz, 100 Hz)
- 70 watt, Class AB biamplification
- RF interference, output current limiting, over-temperature, transient, and subsonic protection
- Amplifier “soft start” feature eliminates popping on power-up
- Internal power supply with IEC connector
- Power switch with on/off LED
- Balanced XLR/ 1/4"
- Unbalanced RCA inputs

2 Way 6.5" Active Studio Monitor with EBM Waveguide

2 Way 8" Active Studio Monitor with EBM Waveguide