Tascam CA-XLR2d-C Canon Kit XLR Microphone
TAS-CAXLR2DC
- Mic/Line inputs: 2 × XLR/TRS combo connectors (balanced, XLR with individually switchable 48 V phantom power)
- Additional mic input: 1 × 3.5-mm 3-pole mini-jack (supports 2.7 V plug-in power)
- Digital audio output: via accessory shoe (CA-XLR2d-C and CA-XLR2d-F only)
- Line/headphones output: 1 × stereo mini-jack
- Sampling rate, bit width: 48/96 kHz, 16/24 bit (according to camera setting)
- Mic preamp EIN (equivalent input noise): ≤–120 dBu (150 Ω, GAIN at max., A-weighted)
- Dynamic range: ≥95 dB (22-kHz LPF, A-weighted)
- Freq. response (XLR to digital input): 20 Hz to 20 kHz +0.5 dB / –1 dB (Fs = 48 kHz), 20 Hz to 40 kHz +0.5 dB / –1 dB (Fs = 96 kHz)
- Power supply: Power through accessory shoe of compatible camera, 2 AA batteries (alkaline, NiMH or lithium-ion)
- Power consumption: 2 W (max.)
1 en stock
CA-XLR2d is a XLR microphone adapter for mirrorless cameras developed in collaboration with Canon, FUJIFILM , and Nikon.
This unit's hot shoe connection was designed and evaluated in collaboration with Canon achieving a high-level compatibility with the brand's multi-accessory shoe.
Included:
- CA-XLR2d unit (with bottom connector cover) × 1
- CA-AK1-C accessory shoe mount adapter (with connector cover/attached to unit) × 1
- CA-AK1-AN cold shoe mount adapter (with interface connector cover) × 1
- Battery holder (with connector cover) × 1 (Separately, two AA batteries are required)
- Mic holder (attached to unit) × 1
- Quick Guide (including warranty) × 1
- 3.5mm(1/8") stereo mini cable × 1
- TASCAM ID registration guide × 1
