Truss Clamp > TV Spigot for FB… 2" Truss Adapter

DSP power amplifier 4x2500W @ 4 ohms, OMNEO, 8 Dante-, 4 AES-3/analog inputs, XLR/NL4 connectors, 100-240V - DSP power amplifier 4x5000W @ 4 ohms, OMNEO, 8 Dante-, 4 AES-3/analog inputs, XLR/NL4 connectors, 100-240V -

DSP power amplifier 4x5000W @ 4 ohms, OMNEO, 8 Dante-, 4 AES-3/analog inputs, XLR/NL4 connectors, 100-240V - -

Tilt angle for MB 200 UMH, white 5° - 45° 0

1 x 6" / 1" full-range cabinet; aluminum housing; 16 ?; black 600W/150W (peak/RMS)

1 x 6" / 1" full-range cabinet; aluminum housing; 16 ?; white 600W/150W (peak/RMS)

2 x 6" / 1" full-range cabinet; aluminum housing; 8 ?; white 1,200W/300W (peak/RMS)

4 x 6" + 1" vertical fullrange / mid-hi cabinet, aluminum housing; 4 ?; 131 db max SPL 2400/600W Peak/RMS

4 x 6" / 1" full-range cabinet; aluminum housing; 4?; white 2,400W/600W (peak/RMS)

12" / 1,4" Fullrange Cabinet / act. 2-way 800W / 400W 8 ?

2x 12" / 1,4" Fullrange Cab. / act. 2-way 1600W/ 800W 4 ?

2x 6" / 1" Fullrange Cabinet, white 600W / 300W 8 ?

1x 6" / 1" Fullrange Cabinet, white 300W / 150W 16 ?

Rotatable Wall-Mount-Kit, black max.10 kg

Rotatable Wall-Mount-Kit, white max.10 kg

Wallmountkit for TS 400

Webbing Strap 4m ( 1-3 Cabinets )

Webbing Strap 8m ( 4-8 Cabinets )

The V600:4 offers the user high flexibility for many applications. This is enabled by multiple power drive options utilizing Dynacord’s patented VLD (Variable Load Drive) technology. It allows the amplifier channels to be driven in 4 ohms, 8 ohms, 70 V or 100 V without compromising the available output power.

The newly developed Dynacord powerTANK technology adds even more installation flexibility, working like a power reservoir for the amplifier. With direct access to the total power of 600 watts, the V600:4 can deliver asymmetric power across all channels (up to 300W per single channel) as needed. There is no waste of energy, which allows great flexibility – especially when driving multiple audio zones with different power requirements. A single V600:4 can simultaneously serve as system drive for the compact loudspeakers in a small zone such as a kitchen area as well as for larger loudspeakers with up to 300 watts such as in an auditorium. Contributing to the ease of installation, this feature does not require any special configuration skills – powerTANK engages automatically.

- Audio connectors analog input: 12x XLR 3-pin female
- Audio connector AES3 input: 2x XLR 3-pin female
- Audio connectors analog output: 12x XLR 3-pin male
- Audio connectors AES3 output: 2x XLR 3-pin male
- Data connectors: 5x etherCON to RJ45 thru
- Rear output: 7x RJ45 connection cables
- Adaptor modules: RJ45 to 2x 6-pin Euroblock
- Ambient temperature limits: -5 °C to +40 °C (25 °F to 105 °F)
- Humidity: <90% (non-condensing)

- Matrix size: 24 x 24
- Sampling rate: 48 kHz /96 kHz
- Dante in/out: 24/24
- Analog inputs: 12 mic/line
- Analog outputs: 8
- Max. input/output level: + 22 dBu
- Signal to noise ratio (inputs/outputs): > 118 dB
- Signal processing: 32/40-bit floating point
- THD+N: < 0.002 %
- Latency (analog in/out, 48 kHz / 96 kHz): < 0.45 ms / < 0.22 ms
- Control ports: 8 GPIO

- Display: IPS 5.7"
- Resolution: 720 x 1440 px
- Color: 16.7 million
- Brightness: 450 nits
- Processor: NXP iMX8, 64-bit Armv8-A, quad symmetric-core ARM Cortex-A53 processor @ 1.8 Ghz
- Proximity sensor (max. range): 120 cm
- Proximity sensor (capture range): 25° horizontal, 25° vertical
- Wired network: IEEE1588 Gigabit Ethernet
- Power over Ethernet (POE): IEEE PoE 802.3af compliant via LAN port
- Aux Power: +24 V DC (connector 5.5/2.5/12 mm), power supply not included
- Power Consumption: Typical 6 W, Maximum 8 W
- USB: USB 2.0 on the rear for service
- Installation: Wall-mount, US NEMA single gang, EU 65mm (IEC/EN 60670), UK BS 4662
- Recommended cabling: CAT6
- Operating conditions: 0°C to + 45°C, max. 95% humidity