- Frequency Response: 20 Hz-20 kHz
- Impedance: 16 Ohms
- Transducer Type: Dual Dynamic
- Sensitivity: 88dB+/-3dB@1mW at 1KHz

- Frequency Response: 20 Hz-20 kHz
- Impedance: 15,5 Ohms +/- 15%
- Transducer Type: Triple Dynamic
- Sensitivity: 100dB+/-3dB@1mW at 1KHz

- Frequency Response: 20 Hz-20 kHz
- Impedance: 15,5 Ohms +/- 15%
- Transducer Type: Quad Balanced Armature
- Sensitivity: 118dB+/-3dB@1mW at 1KHz

Replacement Cable MC Series

Foam ear tips for MP, Large

Foam ear tips for MP, Medium

Foam ear tips for MP, Small

Silicone ear tips for MP, Large

Silicone ear tips for MP, Small

Cable tester

- Selectable parallel/stereo/bridged operating modes
- Independent level control per channel
- Selectable input sensitivity
- Signal, Clip, and Fault LEDs per channel
- Short, under-impedance, over-current and thermal protection
- XLR input and Thru per channel
- NL4 outputs
- Robust, impact-resistant, all-steel 2U rackmount chassis

Hanging Rings for SRM450 and C300z Loudspeakers

Eyebolt Kit for HD Series

Cover for Mackie ProFx10V3

The Macie ProFX10v3 is a professional, 10-channel effect mixer with a USB interface for PC recording. The ProFX10v3 is equipped with an impressive GigFX Engine for up to 24 different internal effects! With 4 microphone channels and 3 stereo line channels with 3-band EQ, you have all the tools you need to mix professionally. The ProFX10v3 is also equipped with 4 Onyx Mic Preamps.

Bag for Mackie ProFx12V3

Cover for Mackie ProFx12V3

Rackmount Kit for Mackie ProFX12v3 Mixer

2x input XLR
8x input XLR mono mic
3x input mono mic XLR
1x stereo mini jack input
Compressor on channels 1 to 8
USB audio interface with USB / DIRECT mix control on headphone and control room outputs
48V phantom power
2x subgroup with independent outputs
Main XLR and jack TRS balanced outputs (12-segment LED Meter)
Weight: 6.9 kg
Dimensions: 434 x 450 x 112 mm

Bag for Mackie ProFx16V3

Mackie ProFX16V3 rack
19 inch rack mounting kit
suitable for ProFX16V3

The Mackie ProFX22v3 is a comprehensive, 22-channel mixing console, suitable for sound engineers looking for a professional all-in-one solution. Equipped with an FX engine and USB Recording interface, you can mix the sound as detailed as you want it! Each channel features a variable 3-band EQ, 48V phantom power (Onyx Mic Preamps), and a 100 Hz Low Cut filter that cuts low.

Bag for Mackie ProFx22V3

Use the Mackie ProFX30v3 to mix, record and create music during live performances, studio recording, live streaming, and more. With 25 Onyx Mic Pre's you deliver up to 60 dB of gain and ultra-low noise performance, which is ideal for content creators with high-gain preamps. Connect your Mackie ProFX30v3 to your PC to record audio in the highest possible quality.

Mackie ProFX30v3 Cover

CARRY BAG FOR MACKIE PROFX6V3

2-input, 6-output system processor for passive and powered PAs - EQ, crossover, delay and dynamics processing - 24-bit AKM AD/DA converters - 2 balanced XLR inputs w. level contr., mute, 600ms delay and 5-band parametric/shelving EQ - 6 balanced XLR outputs w. level contr., mute, polarity inv., dedicated high and low pass filters, 7-band parametric/shelving EQ, 600ms delay, and limiting,...

This M20 threaded speaker pole will fit Mackie DRM18S and DRM18S-P subwoofers. It allows you to mount a PA speaker on top of your woofer.

Compact active system-5,25inch woofer-150Wrms-3-channel mixer with 3-band active EQ-two high-headroom Mackie Mic/line preamps with 48V phantom power - instrument-ready input-dedicated stereo channel-neutrik combo "line in" for linking or adding inputs- XLR 'thru' with mic/line switch-dispersion angle:90°Hx40°V-100Hz-17,5kHz-120dB 1m-3,4 kg

The mackie transport bag for SRM 150 is specially made for transporting and storing your SRM 150. Dirt, dust and moisture don't stand a chance when your SRM 150 is stored in it. The padded interior provides optimal protection and the strong nylon finish makes the transport bag exceptionally strong. The detachable shoulder strap and handle are practical for transporting your SRM 150.