Filters

- Set of UHF40 base receiver and UHF410 hand emitter
- Frequency range: 863-865Mhz
- 40 preset frequencies with Autoscan
- LCD Display on receiver
- True diversity transmitter - 10mW (max) - LCD with channel and battery lvl - 2x AA Batteries (not incl)

- Set of UHF40 base receiver, Bodypack transmitter and headband microphone in case
- Frequency range: 863-865Mhz
- 40 preset frequencies with Autoscan
- LCD Display on receiver
- True diversity bodypack transmitter - 10mW (max) - LCD with channel and battery lvl - 2x AA Batteries (not incl)
- Headband microphone - Electret condenser - Cardioid

UHF410-Head Micro serre-tête sweatproof à cellule à condenseur

Extreme Waterproof & Sweat-proof design
Can be cleaned with water
Flexible and slim gooseneck boom
Fully adjustable headband
High-quality voice pickup
Easy wear-on style
Steel Cable for improved durability

IP66 Water Resistant
Flexible and slim gooseneck boom
Fully adjustable headband
High-quality voice pickup
Easy wear-on style
Steel Cable for improved durability

The TLM 103 is the ideal large diaphragm microphone for all professional and semi-professional applications requiring the utmost in sound quality on a limited budget.

By utilizing the tried and true transformerless circuit found in numerous Neumann microphones, the TLM 103 features yet unattained low self-noise and the highest sound pressure level transmission. The capsule, derived from that u

ordercode: 007022 - Neumann Large Diaphragm Microphones - The Neumann classic. It is the world’s most widely used large-diaphragm condenser microphone. Three directional characteristics and switchable pre-attenuation ensure suitability for a wide range of applications.
Also available as a stereo set in an aluminum case, incl. elastic suspensions. 2 years warranty

• Large-diaphragm (1-inch) gold-sputtered condenser capsule
• Cardioid polar pattern
• Extended frequency response
• 32-bit float digital output
• Dual Connect output – XLR and USB connectivity
• Exceptionally low self-noise (4dBA)
• High sensitivity and high SPL handling
• Ultra-low-noise, high-gain Revolution Preamp™
• High-resolution (192kHz) A/D conversion
• On-board DSP for advanced APHEX® audio processing, including a compressor, noise gate, highpass filter, and Aural Exciter™ and Big Bottom™ effects
• Studio-grade shock mount and pop filter, XLR and USB cables included
• Available in silver and black
• Designed and made in RØDE’s precision manufacturing facilities in Sydney, Australia
Box Contains
• NT1 5th Gen (Silver/Black)
• SM6 shock mount with pop filter
• 6m XLR Cable (Black/Red)
• SC29 3m USB-C to USB-C Cable
Box Contains
• NT1 5th Gen (Silver/Black)
• SM6 shock mount with pop filter
• 6m XLR Cable (Black/Red)
• SC29 3m USB-C to USB-C Cable

• Large-diaphragm (1-inch) gold-sputtered condenser capsule
• Cardioid polar pattern
• Extended frequency response
• 32-bit float digital output
• Dual Connect output – XLR and USB connectivity
• Exceptionally low self-noise (4dBA)
• High sensitivity and high SPL handling
• Ultra-low-noise, high-gain Revolution Preamp™
• High-resolution (192kHz) A/D conversion
• On-board DSP for advanced APHEX® audio processing, including a compressor, noise gate, highpass filter, and Aural Exciter™ and Big Bottom™ effects
• Studio-grade shock mount and pop filter, XLR and USB cables included
• Available in silver and black
• Designed and made in RØDE’s precision manufacturing facilities in Sydney, Australia
Box Contains
• NT1 5th Gen (Silver/Black)
• SM6 shock mount with pop filter
• 6m XLR Cable (Black/Red)
• SC29 3m USB-C to USB-C Cable
Box Contains
• NT1 5th Gen (Silver/Black)
• SM6 shock mount with pop filter
• 6m XLR Cable (Black/Red)
• SC29 3m USB-C to USB-C Cable

NT1 Kit Complete recording solution, BLACK

- Acoustic Principle: Pressure Gradient
- Active Electronics: JFET impedance converter with bipolar output buffer, A/D converter 16bit 48kHz
- Capsule: 0.50"
- Polar Pattern: Cardioid
- Bit Depth: 16-bit
- Address Type: Side
- Frequency Range: 20Hz - 20kHz
- Maximum SPL: 110dB SPL
- Power Requirements: USB
- Output Connection: USB and 3.5mm headphone

- Acoustic Principle: Pressure gradient
- Active Electronics: Electret condenser, A/D and USB interface
- Polar Pattern: Cardioid
- Frequency Range: 20 Hz – 20 kHz
- Input SPL @ 1% THD: 121dB (A-weighted, as per IEC651)
- Sample Rates: 48 kHz
- Bus Powered: Yes
- Bit Depth: 24-bit
- Analog Outputs: 3.5mm headphone
- Computer Connectivity: USB - simultaneous I/O Mono input, stereo output
- Output Connection: USB-C
- OS Requirements: macOS 10.12 / Windows 10

Microfoonbundel bestaande uit: X1S studiomicrofoon en Isolation pack (shockmount + popfilter)

Cardioid instrument microphone especially suitable for use with bass drums, bass guitar cabs and tubas. Solid, lightweight, and easy to position. For studios, clubs, rehearsal rooms, smaller gigs, or for home recording.

Dynamic super-cardioid miniature instrument microphone. Ideal for brass, drums, and woodwind. Flexible gooseneck with multifunctional clip for easy positioning. Handles high SPLs without distortion.

Super-cardioid silver instrument microphone designed for miking guitar cabs face-on and extremely close to the source. Provides isolation from other onstage signals. Also suitable for miking drums, especially toms.

-Frequentie microfoon: 80 - 15000 Hz
-Microphone input impedance: 350 Ohm
-Connectiviteitstechnologie: Bedraad
-Aansluiting: XLR-3
-Hoogte: 180 mm
-Diameter: 4,8 cm
-Gewicht microfoon: 330 g

Dynamic cardioid microphone designed for speech and vocals. Produces a solid sound that projects well and cuts through high volumes on stage. Intended for home recording, semi-pro studios and live sound applications.

Dynamic super-cardioid vocal mic, which helps to reduce spill and feedback. Ideal for presentations, conferences, choirs, rehearsal rooms, and stage. Easily eliminates ambient noise. Superb high frequency reproduction.

Electret condenser microphone with super-cardioid pickup. Rugged, for live performance and lead vocals with natural, detailed sound. Sensitive to the slightest nuances. Precise reproduction for moderators and speakers.

Dynamic cardioid bass instrument microphone with integral stand mount. Designed for deep frequencies such as kick drums, bass guitar amps, and tuba. Dampens mid-range to accentuate high-end and bass. Rugged housing.

Professional cardioid condenser gooseneck for superb definition. For wind instruments, congas, drums with free-floating suspension. Easily mounted/positioned. Intelligent preamp for cable. Phantom power. Level check.

High-grade cardioid condenser microphone for demanding applications. Outstanding sound properties for highly sophisticated applications like acoustic guitars, cymbals, percussion, overheads, orchestras, and grand pianos.

Wireless headmic set. Includes (1) SK 100 G4 bodypack, (1) ME 3-II headmic (cardioid, condenser), (1) EM 100 G4 rackmount receiver, (1) GA3 rack kit and (1) RJ10 linking cable, frequency range:A (516 - 558 MHz)

Coaxial cable with BNC connector, 50 Ohm, 0.25m

Coaxial cable with BNC connector, 50 Ohm, 0.5m

Low damping coaxial cable with BNC connector, 50 Ohm, 20m

Neckworn microphone, omnidirectional, MKE 2 capsule, black, 1.6m cable with 3.5mm jack, for EW-D SK, SL Bodypack DW, SK 100/300/500 G4

Headset microphone (omnidirectional, pre-polarized condenser) with 1.3m fixed cable for 2000, 5000, 6000 and 9000 Series, black. Includes (1) HSP Essential omni-black with 3-Pin connector, (1) SL MZW 1 foam windscreen and (1) soft pouch