9mm plywood with a black protective top layer
removable doghouse
Penn Elcom™ recessed black handle, wheels and butterfly-locks
Exterior sizes: Length 838mm, Height 182mm, Depth 558mm
Weight approx 21kg

Professional Flightcase for Denon DJ MCX 8000 controller
Made of 9mm new plywood
Penn Elcom handle and butterfly locks.
Exterior size : Width 826 mm, Depth 541 mm, Hight 196mm
Weight: 14.7kg

UControlS is a professional black case for Small Sized DJ Controllers with Sliding Laptop Platform.
Fits American Audio Encore 2000, Denon DN-MC6000 MK2, Numark Mixtrack Quad, Pioneer DDJ-SB,
Removable Front Panel Allows Access to Headphone Jacks and Controls.
Includes Adjustable Foam Pads to Fit Various Controllers
Integrated Cable Ports for Power and Signal Routing

NEW Case for Pioneer XDJ RX2, Black - 9mm plywood with a black protective top layer
Penn Elcom™ recessed black handle, wheels and butterfly-locks
Exterior sizes: Length 838mm, Height 182mm, Depth 500mm
Weight approx 18kg

NEW Case for Pioneer XDJ RX2 including Laptop platform, Black - 9mm plywood with a black protective top layer
Penn Elcom™ recessed black handle, wheels and butterfly-locks
Exterior sizes: Length 839mm, Height 234mm, Depth 604mm
Weight approx 19.7kg

Flightcase for the Pioneer DDJ SR controller

A sliding platform to hold a laptop (including velcro straps) is included in the design.
Made from 9mm plywood with a hard protective black top-layer
Storage space for cables, hard-drives, a clean t-shirt etc
Professional handle and butterfly-locks from PENN ELCOM™
4 Rubber feet
Width 651mm, Height 209mm, Depth 449mm
Weight approx. 13Kg

Professional flight case for Pioneer DDJ RR Controller With Laptop tray.

Made from new birch wood and extra strong print
All handles and locks PENN ELCOMt
Exterior size : Width 662mm, Depth 454mm, Hight 175mm
Weight approx 11kg

Professional flight case for Pioneer DDJ RZX Controller With Laptop tray.

Made from new birch wood and extra strong print
All handles, wheels and locks PENN ELCOM
Exterior size : Width 1047 mm, Depth 693 mm, Hight 197mm
Weight approx 24.6kg

Professional black case for Denon SC5000 - Made of 9 mm wood
Hard black top layer
All handles and locks are PENN ELCOM
384 wide 564 deep and 194 hight
Weight appox 9 kg

Professional Black Flightcase designed for Pioneer’s CDJ 2000 NXS2

9mm plywood with a black protective top layer
Penn Elcom™ recessed black handle, wheels and butterfly-locks
Exterior sizes: 384mm wide 564mm deep and 194mm hight
Weight approx 9kg

NEW Case for Pioneer DJM 900 NXS2, Black

9mm plywood with a black protective top layer
Penn Elcom™ recessed black handle, wheels and butterfly-locks
Exterior sizes: 384mm wide 564mm deep and 194mm hight
Weight approx 9kg

Professional Flightcase designed for The Allen & Heath SQ5 Digital Mixer
Including a stylish doghouse, hiding all cabling and connectors.. 9mm plywood with a black protective top layer
Incuding doghouse that opens from the top and back for easy access
Penn Elcom™ recessed black handles and butterfly-locks
Exterior sizes: Length 532mm, Height 254mm, Depth 729mm
Weight approx 17.2kg

Professional Flightcase designed for The Allen & Heath SQ6 Digital Mixer
Including a stylish doghouse, hiding all cabling and connectors.. 9mm plywood with a black protective top layer
Incuding doghouse that opens from the top and back for easy access
Penn Elcom™ recessed black handles and butterfly-locks
Exterior sizes: Length 732mm, Height 254mm, Depth 729mm
Weight approx 21.3kg

Professional Flightcase designed for The Allen & Heath SQ7 Digital Mixer
Including a stylish doghouse, hiding all cabling and connectors..
9mm plywood with a black protective top layer
Incuding doghouse that opens from the top and back for easy access
Penn Elcom™ recessed black handles and butterfly-locks
Exterior sizes: Length 898mm, Height 254mm, Depth 729mm
Weight approx 28.5kg

Professional Flightcase designed for M32

9mm plywood with a black protective top layer
Incuding doghouse that opens from the top and back for easy access
Penn Elcom™ recessed black handles and butterfly-locks
Exterior sizes: Length 987mm, Height 341mm, Depth 904mm
Weight approx 38.5kg

The ProDJuser X32 MK2 is specifically designed for Behringer’s X-32 digital mixing console.

Made from 9mm plywood with a hard protective black top-layer
Storage space for cables, LED Gooseneck lights etc.
Professional handles and butterfly-locks from PENN ELCOM™
2 recessed PENN ELCOM™ wheels for easy transport
Width 1005mm, Height 260mm, Depth 676mm
Weight approx. 20Kg

Case for Behringer X32 Producer - Made from 9mm plywood with a hard protective black top-layer
90mm Storage space for cables, LED Gooseneck lights etc.
Professional handle and butterfly-locks from PENN ELCOM™
Width 560mm, Height 242mm, Depth 645mm
Weight approx. 12Kg

Case for Behringer X32 Compact - Made from 9mm plywood with a hard protective black top-layer
90mm Storage space for cables, LED Gooseneck lights etc.
Professional handle and butterfly-locks from PENN ELCOM™
Width 710mm, Height 272mm, Depth 651mm
Weight approx. 15Kg

Professional flightcase with doghouse for Yamaha QL1
PENN Elcom hardware

The ProDJuser Qu-16 case is specifically designed for the Allen & Heath Qu-16 digital live console.

Made from 9mm plywood with a hard protective black top-layer
Storage space for cables, hard-drives, network devices, a clean t-shirt etc.
Professional handles and butterfly-locks from PENN ELCOM™
Width 694mm, Height 264mm (lit 175mm), Depth 504mm
Weight approx. 12Kg

FLI 2-12 RS is the heavy Duty Professional 2HE 19? tunnel case, with detachable front/rear lid!

Made out 6mm Plywood and finished with a hard black top layer
Penn Elcom hardware
Butterfly locks (2 on each cover)
Comfortable recessed side handle
Front rack profile punched, rear rail
Including 4 rubber feet
Width 530mm, Height 130mm, Depth 415mm
Weight just 7.5Kg

Heavy Duty Professional 2HE 19? tunnel case, with detachable front/rear lid!

Made out 9mm Plywood and finished with a hard black top layer
Penn Elcom hardware
Butterfly locks (2 on each cover)
Comfortable recessed side handles
Front rack profile punched, rear rail
Including 4 rubber feet
Width 530mm, Height 130mm, Depth 609mm
Weight appox 9kg

FLI 4-12 RS is a heavy Duty Professional 4HE 19? tunnel case, with detachable front/rear lid!

Made from 9mm Plywood and finished with a hard black top layer
Penn Elcom hardware
Butterfly locks (2 on each cover)
Comfortable recessed side handles
Front rack profile punched, rear rail
Including 4 rubber feet
Width 525mm, Height 216mm, Depth 415mm
Weight appox 9kg

Heavy Duty Professional 4HE 19? tunnel case, with detachable front/rear lid!

Made out 9mm Birch Plywood and finished with a hard black top layer
Penn Elcom hardware
Butterfly locks (2 on each cover)
Comfortable recessed side handles
Front rack profile punched, rear rail
Including 4 rubber feet
Weight appox 11kg

FLI 4-20 RS is ideal as amplifier, small FX or recording case.

made from new birch and extra strong print
Penn Elcom hardware
Butterfly locks (2 on each cover)
Comfortable recessed side handles
Front rack profile punched, rear rail
Including 4 rubber feet
Width 530mm, Height 216mm, Depth 507.2mm
Weight appox 11kg

19" 6HE Tunnel Case, depth 45cm

Made from new birch and extra strong print
All handles and locks PENN ELCOM
Butterfly locks (2 on each cover)
Comfortable recessed side handles
Front rack profile punched, rear rail
Including 4 rubber feet
Width 530mm, Height 305mm, Depth 457mm
Weight appox 13kg

Heavy Duty Professional 6HE 19? tunnel case, with detachable front/rear lid!

Made out 9mm Birch Plywood and finished with a hard black top layer
Penn Elcom hardware
Butterfly locks (2 on each cover)
Comfortable recessed black side handles
Front rack profile punched, rear rail
Including 4 rubber feet
Width 530mm, Height 305mm, Depth 508mm
Weight approx 14.3kg

Heavy Duty Professional 8HE 19? tunnel case, with detachable front/rear lid!

Made out 9mm Birch Plywood and finished with a hard black top layer
Penn Elcom hardware
Butterfly locks (2 on each cover)
Comfortable recessed side handles
Front rack profile punched, rear rail
Including 4 rubber feet
Weight appox 14.6kg

Heavy Duty Professional 8HE 19? tunnel case, with detachable front/rear lid!

Made out 9mm Plywood and finished with a hard black top layer
Penn Elcom hardware
Butterfly locks (2 on each cover)
Comfortable recessed black side handles
Front rack profile punched, rear rail
Including 4 rubbers
Width 530mm, Height 394mm, Depth 508mm
Weight approx 14.7kg

Heavy Duty Professional 10HE 19? tunnel case, with detachable front/rear lid!

Made from new birch and extra strong print
All handles and locks PENN ELCOM
Butterfly locks (2 on each cover)
Comfortable recessed black side handles
Front rack profile punched, rear rail
Including 4 rubber feet
Width 530mm, Height 483mm, Depth 508mm
Weight approx 17kg

19" 12HE Tunnel Case, fixed rack profile, depth 45cm

Made out 9mm Birch Plywood and finished with a hard black top layer
Penn Elcom hardware
Butterfly locks (4 on each lid)
Comfortable recessed black side handles (2 p/side)
Front rack profile punched, rear rail
Including 4 rubber feet
Weight appox 18.5kg

Heavy Duty Professional 16HE 19? tunnel case

Made out 9mm Plywood and finished with a hard black top layer
Penn Elcom hardware (including blue wheels)
Butterfly locks (4 on each lid)
Comfortable recessed black side handles
Front rack profile punched, rear rail
Detachable wheel plate with 4 steerable wheels (2 w/lock)
Width 530mm, Height 750mm, Depth 508mm
Weight approx 29.5kg

The new Roadie Series TRU 37, is a birchwood tray that fit perfectly inside the new stolp flightcase

We can also provide the outer transport Wheels

For this new Roadie Series MU 3 RS 19?3 U rack (540 MM deep) we used 15MM Birchwood and the same hard spray paint finish as used by many professional loudspeaker manufacturers..
The rear has a cutout and cover and recessed rack rail, so that connectors can stay plugged in and cables can be guided from 1 rack to the other..

Weight approx 11.5kg

For this new Roadie series MU 6 RS 19?3 U rack (540 MM deep) we used 15MM Birchwood and the same hard black spray paint finish as used by many professional loudspeaker manufacturers..
The rear has a cutout and a removeable cover with ventilation grid, so that cables can stay plugged and can be guided from 1 rack to the other..

Weight approx 14kg

This New Roadie series by ProdJuser Flightcase,
Is designed to hold and transport 1x MU-6 RS or 2x MU-3 RS racks.
Equipped with Penn hardware, double handles and locks..
Weight approx 26kg

Slant 11-2 RS is the perfect flightcase to hold a 19? mixer and/or controller on top and 19? rack equipment on the frontside.
Professional black handles and butterfly-locks from PENN ELCOM™
Heavy duty hardware and ball corners
Sliding rack rail on the top, punched rackrail on the front
Hinged door with PENN ELCOM™ butterfly lock on the rear
Width 536mmmm, Height 331.5 mm, Depth 620mm
16.3Kg

19" Case, 11HE top, 4HE front + Laptop Tray - Professional handles and butterfly-locks from PENN ELCOM™
Heavy duty hardware and ball corners
Sliding rack rail on the top, punched rackrail on the front
Hinged door with PENN ELCOM™ butterfly lock on the rear
Width 536mm, Height 500mm, Depth 620mm
Weight approx 20Kg

19" Case, 11HE top, 4HE front, higher top lit, new type MK2 - Professional black handles and butterfly-locks from PENN ELCOM™
Heavy duty hardware and ball corners
Sliding rack rail on the top, punched rackrail on the front
Hinged door with PENN ELCOM™ butterfly lock on the rear
Width 536mm, Height 430mm, Depth 620mm
Weight approx 17.3Kg

Slant 11-8 MK2 RS is a flightcase for 19? rack equipment that holds 11 units on the top- and more than 8 units on the front- side.

Professional black handles and butterfly-locks
Heavy duty hardware and ball corners
Sliding rack rail on the top, punched rackrail on the front
Supplied with enough rackware to rack-mount all your equipment
Width 542mm, Height 658mm, Depth 620m
20.5Kg

Professional solution to transport your valuable 19? mixer and rack-equipment.
Made from 9mm plywood with a hard protective black top-layer
Professional black handles and butterfly-locks
Sliding rack rail on the top, punched rackrail on the front
Width 542mm, Height 1043mm/Total 1153mm(with wheels), Depth 670mm
Weight approx 36Kg

19" Case, 14HE top, 6HE front - Professional black handles and butterfly-locks from PENN ELCOM™
Heavy duty hardware and ball corners
Sliding rack rail on the top, punched rackrail on the front
Hinged door with PENN ELCOM™ butterfly lock on the rear
Wide 560mm, Hight 520mm, Dept 750mm.
Weight approx 22Kg

Set of 2 19inch cases, bottom 10U, top 9U and 12U tilt-able mixerrack, incl. wheels
100mm durable Blue Wheels (2 w/brake)
Top case: Width 542mm, Total Height 512mm incl lit/442mm without, Depth 670mm (with lit)
Bottom case: Width 542mm, Total Height 484 (without wheels), Depth 670mm (with lit)
Weight: approx. bottom 21Kg, top 18Kg

Made out 9mm Birch Plywood and finished with a hard black top layer
PENN ELCOM™ hardware
2 Butterfly Locks
4 Comfortable recessed side handles
4 100m Blue wheels, 2 with brake
Compartment for 12 microphones
Adjustable compartments
Exterior sizes: Length 1136mm, Height 586mm, Depth 600mm
Weight 39Kg

NEW Cable Case XL, 3 seperation panels, wheels - Made out 9mm Plywood and finished with a hard black top layer
PENN ELCOM™ hardware
2 Butterfly Locks
8 Comfortable recessed handles
4 100m Blue wheels, 2 with brake
Adjustable compartments
Exterior sizes: Length 780mm, Height 500mm, Depth 590mm
Weight approx 36Kg

Stand Case MK2 RS, developed for its weight – but still able to holds approximately 12-16 mic stands, depending on type, size and weight. Made out 9mm Plywood and finished with a hard black top layer
PENN ELCOM™ hardware
Butterfly locks
Comfortable recessed side handles on both ends
Hinged Lit (fixed)
Exterior sizes: Length 1204mm, Height 316mm, Depth 310mm
Weight approx 14.5Kg

Heavy Duty Professional Mic Stand Case RS, specially developed for durable transport of max 16 mic stands including boom. The case is provided with 16 tubes that can hold normal- as well as short mic stands. The hinged door on the front ensures easy handling of the mic stands, while the tube storage helps you to count the number of stands!

ProDJuser DC4 is a on the road toolcase and workbench. It’s reliable, strong and developed for really on-the-road use. Four recessed wheels will make transporting surely easier and even somewhat convenient. Ideal flightcase for installers, rental companies with crappy gear and all other craftsman that work on location.

Check out these pro features:

Made of 9mm plywood with a hard protective black top-layer
Professional handle and butterfly-locks from PENN ELCOM™
Width 547mm, Height 769mm, Depth 473mm

Case for 15"/17" Laptop, heavy duty, with locks and key

Made out 6mm Birch Plywood and finished with a hard black top layer
2 Lockable locks
Very comfortable handle
Document storage in lit
Width 447mm, Height 125mm, Depth 366mm
Weight approx 4.5kg

Wheels - wielplaat - Made out 18mm Birch Plywood and finished with a black paint
Very durable 100mm Blue Wheels, 2 w/brake
Comfortable pre-manufactured handgrip
4 Pre-drilled wholes for fixing a flight case
Width 526mm, Depth 559mm

Professional Black Flightcase designed for Pioneer XDJ XZ
Including a stylish doghouse, hiding all cabling and connectors.

9mm plywood with a black protective top layer
Incuding doghouse that opens from the top and back for easy access
Penn Elcom™ recessed black handles and butterfly-locks
Exterior sizes: Length 986mm, Height 182mm, Depth 560mm
Weight approx 23kg

Professional Black Flightcase designed for Pioneer’s CDJ 2000 NXS2

9mm plywood with a black protective top layer
Penn Elcom™ recessed black handle, wheels and butterfly-locks
Exterior sizes: 384mm wide 564mm deep and 194mm hight
Weight approx 9kg

NEW Case for Pioneer DJM 900 NXS2, Black

9mm plywood with a black protective top layer
Penn Elcom™ recessed black handle, wheels and butterfly-locks
Exterior sizes: 384mm wide 564mm deep and 194mm hight
Weight approx 9kg

NEW Case for Pioneer XDJ RX2, Black - 9mm plywood with a black protective top layer
Penn Elcom™ recessed black handle, wheels and butterfly-locks
Exterior sizes: Length 838mm, Height 182mm, Depth 500mm
Weight approx 18kg

NEW Case for Pioneer XDJ RX2 including Laptop platform, Black - 9mm plywood with a black protective top layer
Penn Elcom™ recessed black handle, wheels and butterfly-locks
Exterior sizes: Length 839mm, Height 234mm, Depth 604mm
Weight approx 19.7kg

9mm plywood with a black protective top layer
removable doghouse
Penn Elcom™ recessed black handle, wheels and butterfly-locks
Exterior sizes: Length 838mm, Height 182mm, Depth 558mm
Weight approx 21kg

Professional black case for Denon SC5000 - Made of 9 mm wood
Hard black top layer
All handles and locks are PENN ELCOM
384 wide 564 deep and 194 hight
Weight appox 9 kg

NEW Case for Numark Mixdeck Quad, Pioneer DDJ-SX2, DDJ-SX, DDJ-AERO, Black - Made of 9 mm wood
All handles and locks are PENN ELCOM
Interior dimension(LxMxH): 68.5cm X 34cm X 8.9cm
Exterior dimension(LxMxH): 83cm X 52cm X 22cm
Weight appox 15.4kg

NEW Case for Numark Mixdeck Express, Numark NV, Pioneer DDJ-SR, Reloop Terminal Mix 4 - Made of 9 mm wood
All handles and locks are PENN ELCOM
Interior dimension(LxMxH): 61cm X 33.5cm X 8.9cm
Exterior dimension(LxMxH): 76cm X 54cm X 22cm
Weight appox 13.6kg

UControlS is a professional black case for Small Sized DJ Controllers with Sliding Laptop Platform.
Fits American Audio Encore 2000, Denon DN-MC6000 MK2, Numark Mixtrack Quad, Pioneer DDJ-SB,
Removable Front Panel Allows Access to Headphone Jacks and Controls.
Includes Adjustable Foam Pads to Fit Various Controllers
Integrated Cable Ports for Power and Signal Routing