Bells and whistles are great if you need them. If you don’t, you want maximum value from minimum spend.
Open DMX USB gives you just what you want, and need in a USB-based interface for controlling your DMX lights.
Enjoy reliable, no-fuss control of 512 channels, and full compatibility with a range of programs.

Dual, fully independent, DMX ports each with full RDM capability
MIDI input and output ports
Includes micro USB cable and break out cable (DMX only)
Standalone operation for replay of 512 channel lighting shows
One firmware version supports all features
True 1500V isolation separating all DMX ports

Born from the Open DMX USB and DMX USB PRO, the ODE is the industry's first affordable DMX Ethernet gateway. 10/100 Ethernet port
Supports Artnet and ESP
1 Input & 1 Output connector (not simultaneous use)
Status, Direction and Link leds
Ethercon connector
7V DC jack
ARM 32bit Processor.
Upgradeable firmware

- Two bi-directional DMX/ E1.20 RDM ports with optional termination and RDM support
- IEEE 802.3af PoE (Power over Ethernet) or DC 7-24v input
- Surface or TS35 DIN-rail mount
- Support for Art-Net 4, sACN and ESP to DMX conversion
- Support for DMX -> Art-Net (Broadcast or Unicast) / DMX -> ESP (Broadcast or Unicast) / DMX -> sACN (Multicast or Unicast)
- HTP/LTP merging support for up to 2 DMX sources
- Pluggable terminal blocks and inbuilt DMX termination
- Intuitive device configuration and updates through the inbuilt web interface
- Surface or TS35 DIN rail mount
- 10/100 Mbps network speed
- ‘Current Port Buffer’ allows live DMX values to be viewed
- Configurable refresh rate

Supports to 4096 DMX channels (8 DMX universe support).
Supports either LTP or HTP Merging (upto 2 sources).
RJ45 outputs. XLR connectors. RJ45s connectors. CAT5 cable. ANSI E1.27-2 specified RJ45 pinout. Supports Art-Net 1/2/3, sACN and ESP.
8 DMX (RJ45) data output ports, IEC power connector, 10/100 Ethercon RJ45 Ethernet. One unit in metal 9.5 inch 1 Unit rack. Two units in 19 inch rack.

Ultra-fast DDR memory and Gigabit Ethernet, all 24 DMX outputs are synchronised. Easier and lower cabling costs using standard RJ45 outputs. XLR connectors, RJ45 connectors. Standard CAT6 cable. Standard ANSI E1.27-2 specified RJ45 pinout.
Art-Net 1-2-3, sACN, KiNET, ESP
24 DMX 512 output ports on RJ45
1 Gigabit Ethernet port
1 RS232 input for profile selection via serial command