Briteq Dmx Gear

The perfect solution for many DMX-line problems: this mini DMX-splitter divides any DMX-chain in 2 separate lines that will not interfere with each other, problems on 1 line will not influence the other line!
Maximum security, thanks to complete galvanic isolation between all in/outputs
100% RDM compatible for bidirectional DMX-communication
1 INPUT and 2 OUTPUTS

- Perfect All-in-one solution to secure your DMX-installatioins
- Merger/Splitter/Booster
- 100% electrical isolation between all in and outputs
- 2 inputs, 6 outputs. All with 3p/5p XLR connectors
- Merger:
* HTP: Highest value has priority
* Backup: Channel A has priority until A fails or has no DMX, Channel B takes over.
* Merge: Two desks are merged, both control specific channels

-High speed Art-Net and sACN Node with 4 highly configurable DMX ports:
*as input : normal mode
*as output : single, LTP, HTP or ZERO mode
- Gigabit Ethernet I/O based on high speed Marvell switch,without linking delay(IEEE 802.3-2005)
-Automatic Ethernet bypass on power fails
-Integrated web interface with support formobile devices (NFC)
-RDM over Art-Net compatible

-High speed Art-Net and sACN Node with 4 highly configurable DMX ports:
*as input : normal mode
*as output : single, LTP, HTP or ZERO mode
- Gigabit Ethernet I/O based on high speed Marvell switch,without linking delay(IEEE 802.3-2005)
-Automatic Ethernet bypass on power fails
-Integrated web interface with support formobile devices (NFC)
-RDM over Art-Net compatible

Mains Input: AC 100 - 240V, 50/60Hz
Power consumption: 7 Watt
Power connections: 100V – 240V IEC inlet with fuse holder
DMX connections: 8x Neutrik 3pin-XLR female
Ethernet connections: 2x Neutrik RJ45 Ethercon (10/100Mbps)
Size: 483 x 44 x 150 mm (19" / 1U)
Weight: 2,1 kg

Mains Input: AC 100 - 240V, 50/60Hz
Power consumption: 7 Watt
Power connections: 100V – 240V IEC inlet with fuse holder
DMX connections: 8x 5pin-XLR female
Ethernet connections: 2x Neutrik RJ45 Ethercon (10/100Mbps)
Size: 483 x 44 x 150 mm (19" / 1U)
Weight: 2,1 kg

This unit can be used to easily upgrade the firmware of compatible DMX-effects & projectors.
One or more DMX-effects can be upgraded simultaneously via their DMX-in/out connections.
No external power adapter needed.

Updater Tool, latest Windows software via website