• Bekafun
  • Roland DJ DJ-202: DJ Controller for Serato DJ Intro

Roland DJ DJ-202: DJ Controller for Serato DJ Intro

RDJ-DJ-202

- DJ controller for Serato DJ Intro
- Serato DJ Intro included
- Large platters
- Two-channels, four decks
- 24-bit/48 kHz audio
- Built-in drum kits
- USB powered
- RCA stereo outputs
- Compat, rugged and lightweight design
- Dimensions: 487 x 297 x 62 mm
- Weight: 2.1 kg


€ 392,08
€ 313,08
prices incl. taxes and VAT

Temporarily out of stock

De Roland DJ-202 is een vooruitstrevende Serato DJ Intro-controller die DJ’s de features en opstelling van een full-size professionele controller geeft, in een robuuste en draagbare unit. De compacte DJ-202 behoudt het concept van het DJ-808-topmodel en de gestroomlijnde DJ-505, en levert een ongeëvenaarde flexibiliteit voor DJ-, remix- en productietoepassingen. Maak beats in een handomdraai tijdens live performances of studiosessies. Met zijn grote, low-latency draaiplateaus, speciale pad- en transport-controls, ingebouwde sequencer en microfooningang met professionele vocal FX beschikt de DJ-202 over de meeste features in vergelijking met eender welke andere controller binnen zijn categorie.

*TR-606 en TR-707 sounds zullen later toegevoegd worden via een door de gebruiker te installeren firmware update.

Features:

  • Two-channel, four-deck controller for Serato Intro
  • Large platters with the lowest available latency, optimized for scratching
  • Built-in drum kits from Roland’s legendary TR-808, TR-909, TR-606*, and TR-707*, realized with advanced ACB (Analog Circuit Behavior) technology
  • Eight sounds in each TR kit: Bass Drum, Snare Drum, Closed Hat, Open Hat, Tom, Rim, Clap, and Ride
  • Onboard sequencer that controls Serato DJ Intro’s sampler for on-the-fly beat creation
  • Independent sampler volume control
  • Eight dedicated pads with Hot Cue, Loop, Sequencer, and Sampler modes for controlling Serato DJ Intro or Serato DJ software
  • MIDI output for synchronizing external devices with tracks in Serato DJ Intro
  • Mic input with gate, hi-pass, reverb, and echo FX
  • 24-bit/48 kHz audio fidelity with high-resolution digital-to-analog converters
  • Compact, rugged, and lightweight design with easy-grab handles for optimal portability
  • Connect straight to your speakers or amplifier via RCA stereo outputs
  • USB powered for simple connectivity
  • Serato DJ Intro included; Serato DJ Upgrade Ready
  • Use Serato DJ Intro to organize and build music libraries or integrate songs from iTunes—just drag a track to the deck, set and trigger cues, loops, and samples, and apply basic FX

Specs:
Signal processing:

  • Sampling Frequency: 48 kHz

Nominal input level:

  • MIC IN (1/4-inch phone type) -60 dBu

Nominal output level:

  • MASTER OUT: 2.0 Vrms

Input impedance:

  • MIC IN (Combo type): 7 k ohms or greater

Output impedance:

  • MASTER OUT: 1 k ohm
  • PHONES: 22 ohms

Frequency response:

  • 48.0 kHz: 20 Hz-22 kHz (+0/-2 dB)

Connectors:

  • MIC IN jack: 1/4-inch phone type
  • MASTER OUT jacks: RCA phono type
  • PHONES jacks: stereo 1/4 inch phone type
  • PC port: USB type B
  • MIDI OUT connector
  • DC IN jack

Power supply:

  • USB bus power

Current draw:

  • 500 mA

Accessories:

  • Startup Guide
  • USB cable

Size and weight:

  • 478 × 297 × 62 mm
  • 2.1 kg