hot shoe adaptor for Fujifilm cameras for CA-XLR2d

A/D conversion
Sampling frequency
48 kHz / 96 kHz
Bit width
16 bit, 24 bit (Fs and bit width are synchronized with the settings of the connected camera)
Number of audio channels
2
Analogue audio inputs
Mic inputs 1, 2 (balanced)
XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
(phantom power available)
Input impedance
≥2 kΩ
Maximum input level
+6 dBu (ATT set to 46 dB)
Minimum input level
–60 dBu (ATT set to 0 dB)
Gain range
66 dB
Line inputs 1, 2 (balanced)
6.3-mm standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
(phantom power not available)
Input impedance
≥10 kΩ
Maximum input level
+24 dBu
Rated input level
+4 dBu
Gain range
66 dB
Mic input 3 (unbalanced)
3.5-mm 3-pole mini jack (supports plug-in power)
Input impedance
≥2 kΩ
Maximum input level
+6 dBV (ATT set to 46 dB)
Minimum input level
–60 dBV (ATT set to 0 dB)
Gain range
66 dB
Plug-in power
2.7 V
(0 dBu = 0.775 Vrms)
Analogue audio outputs
Headphones/Camera output
3.5-mm stereo mini jack
Output voltage
0.29 Vrms (fixed, when set to headphones)
0.5 Vrms (output volume max., when set to camera)
Headphones impedance
16–250 Ω
Audio performance
Mic preamp EIN (equivalent input noise)
≤–120 dBu (150 Ω, GAIN at max., A-weighted)
Dynamic range
≥95 dB (22-kHz LPF, A-weighted)
Frequency response (XLR to digital input)
20 Hz to 20 kHz +0.5 dB / –1 dB (Fs = 48 kHz)
20 Hz to 40 kHz +0.5 dB / –1 dB (Fs = 96 kHz)
Power supply and other specifications
Power supply
2 AA batteries (alkaline, NiMH or lithium-ion)
Power through accessory shoe of compatible camera
Power consumption
2 W (maximum)
Dimensions (w × h × d, without protrusions)
88 mm × 119 mm × 110 mm
Weight
CA-XLR2d-C: 341 g
CA-XLR2d-F: 331 g
CA-XLR2d-AN: 357 g
Operating temperature range
0–40 °C
Included items
CA-XLR2d-C (Canon Kit)
CA-XLR2d unit*
CA-AK1-C accessory shoe mount adapter (attached to unit)*
CA-AK1-AN cold shoe mount adapter*
Battery holder*
Mic holder (attached to unit)
Quick Guide (including warranty)
3.5-mm stereo mini jack cable
CA-XLR2d-F (Fujifilm Kit)
CA-XLR2d unit*
CA-AK1-F accessory shoe mount adapter (attached to unit)*
CA-AK1-AN cold shoe mount adapter*
Battery holder*
Mic holder (attached to unit)
Quick Guide (including warranty)
3.5-mm stereo mini jack cable
CA-XLR2d-AN (Analogue Kit)
CA-XLR2d unit*
CA-AK1-AN cold shoe mount adapter (attached to unit)*
Battery holder*
Mic holder (attached to unit)
Quick Guide (including warranty)
3.5-mm stereo mini jack cable

---

---

Temporarily out of stock