• Bekafun
  • Next Pro Audio PFA18sHP Active Front-Loaded High Power Subwoofer

Next Pro Audio PFA18sHP Active Front-Loaded High Power Subwoofer

NPO-PFA18SHP

TECHNICAL SPECIFICATIONS
Product Type: Active Reflex Subwoofer
Frequency Response (-6dB): 36Hz - X-over
Amplifier Technology: 2 channel switched mode class D with DSP
Amplifier Power: RMS: 2200W / Program: 2960W / Peak: 5920W
DSP Technology: Controlled Networkable DSP 24bit/48kHz
DSP Adjustable Parameters: 6 PEQ, delay, HPF, LPF, Bass Enhancer, Level, Polarity, Mute
DSP Presets: 6 Factory and 2 User, selectable via software or rear panel switch
Control Type: Via RS485 and suplied software "SOUNDWARE"
Maximum SPL (calculated): 136dB / 142dB (Half-Space)
Subwoofer Driver: 1 x 18" (450mm) / 4" (100mm) voice coil, long excursion, B&C custom speaker
Power Input: 180V - 245V
Mains Connector: Signal: 2 x XLR ; Power: 2 x powerCON;
Power Consumption: 770W
Fittings: 1 x 35mm Pole Mount Socket
Dimensions (WxHxD): 525 x 703 x 735 mm
Net Weight: 47.9kg


€ 2.649,90
€ 2.190,00
prices incl. taxes and VAT

1 in stock

The PFA18sHP is an active 18” compact and powerful subwoofer system loaded by a long excursion, European made 18” woofer and it is internally powered by a DPAmplifier module. This professional active front-loaded subwoofer was engineered for high-level and extended low frequency output.

The integrated DSP with A/D-D/A low noise converters, provides eight selectable presets (six factory defined and two user-defined) that can be accessed by an easy selector, located on the front module panel or real time edited by a PC, using the supplied Soundware software, via USB remote control. This permits easy customization of the sound programme, for various applications or different venues. An intelligent automatic standby mode is activated when the amplifier detects no input signal, saving energy and extending the expected work life.

With the Soundware software is possible to edit the six pre-loaded presets and store them either of the two free memories. Editable parameters are input equalization, input delay, input high-pass/low-pass filters and the 'bass enhancer' function. A total of 255 units can be controlled simultaneously by the software.

The PFA18sHP is also equipped with a top-mounted pole socket that, when in ground stacked applications, can be used to mount satellite speakers equipped with standard 35mm pole sockets.

TECHNICAL SPECIFICATIONS

Product Type

Active Reflex Subwoofer

Frequency Response (-6dB)

36Hz - X-over

Amplifier Technology

2 channel switched mode class D with DSP

Amplifier Power

RMS: 2200W / Program: 2960W / Peak: 5920W

DSP Technology

Controlled Networkable DSP 24bit/48kHz

DSP Adjustable Parameters

6 PEQ, delay, HPF, LPF, Bass Enhancer, Level, Polarity, Mute

DSP Presets

6 Factory and 2 User, selectable via software or rear panel switch

Control Type

Via RS485 and suplied software "SOUNDWARE"

Maximum SPL (calculated)

136dB / 142dB (Half-Space)

Subwoofer Driver

1 x 18" (450mm) / 4" (100mm) voice coil, long excursion, B&C custom speaker

Power Input

180V - 245V

Mains Connector

Signal: 2 x XLR ; Power: 2 x powerCON;

Power Consumption

770W

Fittings

1 x 35mm Pole Mount Socket

Dimensions (WxHxD)

525 x 703 x 735 mm

Net Weight

47.9kg

Datasheet(s)