DAP NRG-15 Passive 15” full-range speaker

The DAP NRG-15 is a passive full-range loudspeaker rated at 550 watts peak (150 watts continuous RMS). It uses a 15” woofer and a 1” compression driver. With a sensitivity of 96 dB/W/m, the NRG-15 comfortably plays up to 118 dB with peaks of up to 130 dB. The compression driver is coupled to a rotatable horn with a directivity of 90°x 60°. The woofer has a low cut-off point of 50 Hertz (-6 dB).

The sturdy, lightweight plywood cabinet has a double-angled top hat (0° and 5°), allowing you to point the cabinet downwards when mounting it on a pole. It uses 4-pole speaker in and thru connectors and offers an additional 4-pin terminal connector, which is especially useful for permanent installation applications. To get the most out of the NRG-15, we recommend using a 4th order high-pass filter at 50 Hertz and adding an NRG series subwoofer.

Inputs

RMS Input Power

150 W

Peak Input Power

550 W

Passive Input Connection

Speaker Connector 4 pole , Terminal

Outputs

Passive Output Connector

Speaker Connector 4 pole

Audio Specifications

Speaker System

2-way

Speaker Sensitivity (1 W/1 m)

96 dB

Speaker Impedance

8 Ω

Maximum SPL at 1 m

118 dB

Frequency Response (-6 dB) Minimum

50 Hz

Frequency Response (-6 dB) Maximum

20000 Hz

Woofer Diameter

15 "

Woofer Voice Coil Diameter

2 "

Woofer Magnet Type

Ferrite

Compression Driver Diameter

1 "

Compression Driver Voice Coil

1.4 "

Compression Driver Magnet Type

Ferrite

Dispersion Angle (Horizontal)

90 °

Dispersion Angle (Vertical)

60 °

Mechanical Specifications

Height (mm)

680 mm

Width (mm)

440 mm

Depth (mm)

460 mm

Material

Plywood

Weight

20.2 kg

IP Rating

IP20 (indoor use only)

Colour

Black

Finish

Painted

Speaker Adapter Diameter

35 mm

Product Properties

Useable as Monitor/Wedge

No

Speaker Grille Material

Steel

Speaker Handle Positions

Left side, Right side

Rigging

Rigging Eye Thread

M10

Thermal Specifications

Maximum Ambient Temperature

40 °C