20 faders
Fully assignable layout – 120 fader strips
Harmony UI integrates screen and wrap-around controls
Single 12” capacitive touchscreen
Gesture control – pinch, swipe, drag ‘n drop
Dedicated multi-mode EQ view
Configurable widget areas for Scenes, meters, FX and more
3 pages of 6 assignable rotaries
26 assignable SoftKeys
Engineer’s Wedge and IEM fader strips
Comprehensive multipoint metering
Daylight visibility
USB stereo recording and playback
8 XLR mic/line in, 8 XLR line out
2 digital st AES3 in, 3 digital st AES3 out
Connection hub
Dual redundant GigaACE gigabit link to MixRack
1x redundant DX link for I/O expansion
2x I/O Ports – 128 ch 96 kHz each
2x Network ports
Wordclock BNC I/O
Video output
Dual redundant, hot swappable power supply
3 Year Warranty

28 faders
Fully assignable layout – 168 fader strips
Harmony UI integrates screen and wrap-around controls
Dual 12” capacitive touchscreen
Gesture control – pinch, swipe, drag ‘n drop
Dedicated multi-mode EQ view
Configurable widget areas for Scenes, meters, FX and more
3 pages of 6 assignable rotaries per screen
26 assignable SoftKeys
Engineer’s Wedge and IEM fader strips
Comprehensive multipoint metering
Daylight visibility
USB stereo recording and playback
8 XLR mic/line in, 8 XLR line out
2 digital st AES3 in, 3 digital st AES3 out
Connection hub
Dual redundant GigaACE gigabit link to MixRack
1x redundant DX link for I/O expansion
2x I/O Ports – 128 ch 96 kHz each
2x Network ports
Wordclock BNC I/O
Video output
Dual redundant, hot swappable power supply
3 Year Warranty

Designed for Wall Mount or Dip Trap installation
16 balanced Mic Preamps on XLR
Phantom Power LED per Input
4 balanced XLR Line Outs
Locking EtherCon ports
Daisy chain or redundant audio connection
Fits in a standard 12”x12” NEMA backbox
Compatible with ACE Backstage 174SLBK stage pocket system
3 power supply options

DX168 AudioRack for dLive S or C Class systems; 16 mic/line, 8 XLR out, dSnake Cat 5/6, 2 Ethercon ports

The DX88 provides 8 inputs and 8 outputs on Phoenix / Euroblock connectors for fixed installations and is an easy way to add local or remote expansion to AHM Audio Matrix Processors.

DX88P-RK19 - Rackmount voor Allen & Heath DX88-P

The DX Hub is a remote audio networking hub that can be connected to any Allen & Heath SQ mixer, or dLive system fitted with a gigaACE I/O module. It provides 4 DX Link ports each carrying 32×32 channels of 96kHz audio, that can be used to connect to DX expander units.

- 2mic inputs on Phoenix connectors
- 2 stereo inputs on RCA
- 2 stereo zone outputs
- Paging and Alarm contact inputs on Phoenix connectors
- Remote control via PL-14 of other via Phoenix connectors

48 Mic Preamps on XLR with Phantom Power status LEDs
16 XLR Line Outs
96kHz operation
Compatible with SQ and dLive (firmware 1.9 onwards) systems
Plug and Play – no IP addressing required
Compatible with CAT5e (or higher) cables of up to 100m

iDR-switch extends the capability of the iDR-8 and iDR-4 by enabling custom wall plate and remote equipment control. It provides 24 switch closure inputs and 16 logic control outputs which can be custom wired by the installer to suit the application. Up to 3 units can be connected, so providing an iDR unit with 72 switch and 48 logic outputs. The controls are easily programmed using the software.

A&H LEDLamp 18" Gooseneck Straight 4 pin XLR (1-9)

LEDLamp-SX (straight designed for consoles with lamp socket on the front panel)

Allen & Heath M-DL-AIN-A - DX32 Mic/line input module - 8 controllable preamps with XLR Input

DX32 Line output module - 8 balanced line outputs
on XLR sockets

Dante card for dLive systems – 64x64 bi-directional
audio, 96kHz/48kHz, 3 EtherCon ports

DX Link card, 128 in, 128 out, 4 DX ports,
redundant / parallel mode

Dual port MADI card supports two streams of 64 channel bi-directional 24-bit 48kHz serial digital audio transmission using two 75 ohm coaxial cables per port. An additional AUX connector can be configured to mirror stream 1 outputs, pass thru stream 1 inputs, or as a word clock input or output. Daisy chain or split signals to multiple devices, sync with either stream or an external word clock.

- 64x64 Channels of Audio I/O for SQ Mixer
- 96 or 48 kHz Operation
- Multichannel Recording/Playback
- Smux or High Speed 96 kHz Modes
- Sync from Inputs or Separate Wordclock
- Console Controlled Error Handling
- Four BNC Connectors (2 Links)
- One BNC Wordclock I/O

The PL-11 is an IR receiver which uses the proprietary PL-Anet CAT5 plug ‘n play protocol employed in Allen & Heath’s iDR and iLive digital mixing systems. Built in to a wallplate backing, the PL-11 receives commands from the PL-5 hand held IR transmitter, which can be set to perform specific functions using iDR’s System Manager software or via the touchscreen in iLive mixing consoles.

PL-12 is an optional accessory for GR2. It is a wall mounted remote control, offering the non technical operator control over music source and level. A single PL-12 can control both zones or a second PL-12 can be added to control the second zone.

The PL-12 is not compatible with the iDR PL-Anet range of wall plates and digital installation products.

PL-14 wall-mount remote control for GR3/GR4

DR & iDR Switch 4 Switch 4 Tricolour LED Wall Plate

The PL-3 wall plate has 4 programmable switches and 4 programmable tri-colour LEDs and is ideal for local operator control of iDR-based audio systems. They may be used, for example, for source selection for an output zone, or local volume control.

The PL-4 wall plate has 2 programmable switches, 4 programmable tri-colour LEDs and a rotary control with LED ladder. It has a built-in infra-red receiver, allowing it to be operated at a distance using the PL-5 handheld remote controller – these control options can be different to those set on the PL-4. PL-4 is ideal for local operator control of iDR-based audio systems.

PL-5 is a stylish and compact battery powered hand held remote controller for use with the Allen & Heath PL-4 and PL-11 wall plates which are equipped with an IR (infra-red) sensor. It has 14 user programmable buttons. These would typically be programmed by the installer as a combination of volume up/down, signal mute, source, preset select or MIDI messages for convenient control.

PL-7 is a stand-alone or surface mounted LCD panel, which enables remote display of status information and text messages which can be stored in recallable memory settings. The PL-7 can be embedded with PL-3 or PL-4 wall plates, allowing programmable control from a single unit. It can also be used for remote alarm/supervisor display.