1U - INDUSTRY STANDARD 2 CHANNEL ‘FREQUENCY CONSCIOUS’ GATE

- Key Holder access only
- Takes only minutes to install
- Tamper-Proof bracket (available separately) to lock-in the XLRs and conform to Local Authority regulations
- Dual 16 segment Left/Right bargraphs for ’at a glance’ level metering
- ’Protection’ processing 16 segment bargraph display
- No sound quality loss even during heavy protection processing
- Once installed and calibrated completely eliminates the possibility of ’unauthorised’ volume levels
- Eliminates sound system abuse and the resulting cost of chassis speaker re-cones, HF diaphragm replacements and amplifier repairs
- Reduces ’call-out’ costs of sound system service/repair engineers
- Reduces sound system ’down time’ and the consequential loss of venue income
- Isolation transformer output option

- Limited speaker and headphone outputs
- Once installed and calibrated completely eliminates the possibility of ’unauthorised’ volume levels
- No sound quality loss even during protection processing
- Large LED level indication for ’at a glance’ monitoring of signals and warnings
- Time delay relays on outputs for clean power up/down
- Fast, simple installation
- Tamper-proof plate limits access to settings
- A security label is supplied to further secure the calibration settings and show evidence of tampering
- Tamper-Proof bracket (available separately) to lock-in the XLRs and conform to Local Authority regulations.
- Reduces ’call-out’ costs of sound system service/repair engineers, sound system ’down time’ and the consequential loss of venue income, as well as the reputation of the venue.
- External control of Dim and Mute for connection to Fire Alarms or remote operation
- Trigger output when in PROTECT mode
- Logging inputs for both ALERT and PROTECT statuses

2U - 2 CHANNEL MIC/LINE/INSTRUMENT PRE-AMP/TUBE COMPRESSOR

2U - 2 CHANNEL VARIABLE INPUT LEVEL 4 BAND TUBE EQUALISER

BIG circuit implementable via sidechain
Soft-knee compressors with variable threshold, attack, release, and output gain
Stereo link or dual mono operable
XLR in- and outputs
VU meter with gain reduction
VU normal and VU 10 dB

Drawmer 1973 three Band Stereo Compressor, XLR In and Output, Frequency Adjustable, Attack, Release Gain and Threshold Adjustable, thomann VU Meters, 19" 2 HE

Drawmer 1974, vintage-style 4 band parametric equaliser, classic sonic clarity and control, variable low and high filters

Drawmer 1976, 3 band stereo saturation and width processor, can operate in stereo and mono

Stereo Tone Shaping FET Compressor. Fast Reacting Stereo FET Design compressor with Left/Right Tracking across the full range of compression. Familiar Threshold, Ratio, Attack and Release controls and Gain Reduction Metering provide familiar and intuative control over the audio. 4 charac- ter switches provide a multitude of compression flavour combinations that allow the 1978 to take on the chara

The CMC2 is a compact monitor controller that has been designed to provide the same top quality audio, transparency and accuracy of Drawmer's other monitor controllers, such as the MC2.1 and MC3.1, whilst retaining all the necessary features that the smaller project studio would require without the cost of the advanced features that would seldomly be used.

The CMC3 Compact Monitor Controller consolidates the feature sets of Drawmer's 3 most popular monitor controllers: Whilst retaining the famed accurate, and transparent audio quality of the MC2.1, it has the precision and control of the MC3.1 and the low profile, compact design of the CMC2. It is equally at home in a serious home studio as in a professional recording facility.

Extremely low-noise and transparent circuit design
Input channels: 8 (DB-25)
Output channels: 8 (DB-25)
25-Pin D-Sub connectors with Tascam assignment

the new improved CPA-50+ Stereo Power Amp is the perfect partner for any passive speaker, and especially in the studio with a set of passive cube monitors.

1U - 1 STEREO INPUT/6 STEREO OUTPUT OR 2 MONO INPUT/12 MONO OUTPUT

1U - PROFESSIONAL QUALITY 2 CHANNEL GATED/COMPRESSOR/LIMITER

1U - Dual Compressor/Limiter - As 'DL 241' but with balanced XLR inputs/ outputs. Professional quality 2 channel gated/compressor/limiter. Variable threshold ?programme adaptive? gate, soft knee compressor with variable threshold, ratio, gain, selectable auto/manual attack and release. Gain reduction and input/output bargraph metering, ?zero overshoot? peak limiter. Switchable -10db/+4db operatin

1U - HIGH SPECIFICATION 2 CHANNEL COMPRESSOR/ENHANCER/LIMITER

1U - PROFESSIONAL QUALITY 4 CHANNEL AUTO COMPRESSOR/LIMITER

1U - Word Clock Measurement And Distribution Amplifier - 2x IN- PUTS: BNC with zero latency loopthrough. AES with with zero latency loopthrough. 20x OUTPUTS: BNC clock outputs - 33Ohm impedance. 3 sample rate measurement LCD modes accurate to 2ppm. Universal voltage filtered mains power input. BNC loopthrough / AES loopthrough.

1U - AES Grade 1 Master Clock - Clock rates of 44.1, 48, 88.2, 96, 176.4, 192, 352.8 and 384kHz at extremely low jitter. External clock input allows the user to select an alternative clock source without having to re-route clock cables. 10 Outputs are provided, 8 at the rear and 2 for easy access on the front panel.

1U - Dual Redundant Wordclock Distribution Amplifier - Designed with not only studio recording in mind but also the live and broadcast environment, where reliability and stability are absolutely imperative. Fail-safe operation, the D-Clock-R has been developed with dual redundancy for both the power supplies and also the auto-sensing clock inputs 2x INPUTS: BNC Redundant Auto sensing wordclock /

500 Series Noise Gate - Single channel frequency conscious noise gate. The DS101 is the first noise gate designed specifically for the 500 Series rack system, based on the industry standard DS 201. Variable high pass and low pass filters, individual attack, hold, release and range for comprehensive envelope control. Ducking, key input, key listen. Linkable ? upto 10 units in one rack space.

1U - INDUSTRY STANDARD 4 CHANNEL ‘FREQUENCY CONSCIOUS’ GATE

Isolation Transformer for 4X4 (Kickbox & Rackmount) Each transformer accommodates 2 isolated outputs per channel - e.g. only 8 x ISTX-4X4 transformers are required for all 16 outputs of the Kickbox 4x4.

Isolation Transformer for DA6

4 IN/16 OUT MIC/LINE SIGNAL SPLITTER IN SELF-CONTAINED ROAD PROOF CASE

1U - 1 STEREO INPUT/12 STEREO OUTPUT LINE DISTRIBUTION AMPLIFIER

Monitor/Headphone Pre-Amp - Hi-Fi Crossover product. Ultra low noise and transparent circuit design. Linear power supply with low hum toroidal transformer and internal voltage selector switch. 3 Input Sources - Balanced XLR, MP3 Player 3.5mm Jack & Switchable Line/Phono (RIAA MM) RCA. Two switchable output stages, Balanced XLR and RCA. Mono Sub woofer output available simultaneous to balanced out

With the Drawmer MC2.1 Monitor Controller incorporated into your system you combine the clarity, fidelity and transparency of the highest quality monitoring circuit with the complexity of a host of mix checking features. It is versatile and intuitive, but above everything else, where the Drawmer MC2.1 excels is in it’s accuracy and ability to faithfully reproduce what has been recorded.