ELM is an intuitive, powerful and cost-effective pixel mapping software solution, giving you the most comprehensive tools and effects available to map LED digital pixel strip or fixture arrays regardless of shape or size, from media façades and bridges to nightclubs and live touring designs.

Professional Edition: supports 96 universes

ELM is an intuitive, powerful and cost-effective pixel mapping software solution, giving you the most comprehensive tools and effects available to map LED digital pixel strip or fixture arrays regardless of shape or size, from media façades and bridges to nightclubs and live touring designs.

Standard Edition: supports 16 universes

ELM is an intuitive, powerful and cost-effective pixel mapping software solution, giving you the most comprehensive tools and effects available to map LED digital pixel strip or fixture arrays regardless of shape or size, from media façades and bridges to nightclubs and live touring designs.

Super Edition: supports 256 universes

ELM is an intuitive, powerful and cost-effective pixel mapping software solution, giving you the most comprehensive tools and effects available to map LED digital pixel strip or fixture arrays regardless of shape or size, from media façades and bridges to nightclubs and live touring designs.

Ultimate Edition: supports 512 universes

Standard 4 module. ANSI E1.11 – USITT DMX512-A and ANSI E.120 RDM compatible. One unit allows control up to 512 channels of DMX throughout the chain.
1000V isolation between input and output, and between any individual output receptacles.
LED indicators: status led, DMX activity led and RDM activity led
4 output DMX ports on 3 way screw connectors, and 1 input DMX on 3 way screw connector.

Supports Artnet, sACN, ESP, IEEE 802.3af (Power Over Ethernet)
Supports RDM over Art-Net (controller) and Art-Net 3
HTP/LTP Merging support: up-to 2 DMX sources
1 RJ45 connector (10/100 Mbps)
Static or Dynamic (DHCP) IP configuration (DHCP by default)
DIN-Rail compatible
Supports Broadcast or Unicast (Input mode)
Phoenix DIN Connectors
Supports 9v-24v DC (Power supply not included)

The Pixelator Mini PX1-8D is a DIN-rail Ethernet pixel converter.
Multi-protocol support: ArtNet 1/2/3, sACN, ESP, Kling-Net
Input/output:
* 8 x PLink output ports on RJ45 (Pixel Link data)
* 1 x 10/100Mbps Ethernet port
* 1x 2 pin screw terminal (Power in)

8-Universe DIN-Rail LED Pixel Controller

Whether you want to control 5V pixel tape or 60V pixel dots, the Pixel Octo can do it all. With its wide voltage input range, you don’t have to have multiple products in your lighting arsenal.
The Pixel Octo is a super-compact 4-module DIN-rail unit LED pixel controller.
Supports ArtNet, sACN, KiNet™ and ESP, 3-wire and 4-wire (CLK) LED protocols.

With in-built power supply (with a 110-240V AC input) and driver
Full DMX-512 compatible. ANSI E1.20 RDM supported,
CV driver supports up-to 5 Amps per output, and a massive 240 watts (73520) total output power. Ready to power up-to 17 meters of ENTTEC 9CL 24V LED tape per output.
Standard 19? rack mount unit using 8 Way mounting rack. Allows racking up-to 8 units into a single rack.

Quickly and easily enables output conversion between XLR 4-PIN and Screw Terminal devices.
Simply use a flat screwdriver to connect LED Tape to CV driver.

All your drivers in one safe place, rack mountable.
Sturdy and modular rack with built-in fan and space for 8 CV driver units.
Made to fit inside a standard rack, it takes up only three standard rack units (3RU) of space.
All your CV drivers are mounted to be easily accessible from the front of the rack unit.

Controlling individual pixels reliably now at your fingertips. Combine the power and control using Pixie Driver, to realize previously unimaginable visual effects, right at your fingertips. Pre-programmed or live, Pixie Driver unlocks the full potential of pixel LED.
Available in 5V (110 WATTS), 12V (130 WATTS), or 24V (130 WATTS).

Controlling individual pixels reliably now at your fingertips. Combine the power and control using Pixie Driver, to realize previously unimaginable visual effects, right at your fingertips. Pre-programmed or live, Pixie Driver unlocks the full potential of pixel LED.

The PLink Injector converts PLink data from your Pixelator or Pixelator Mini, to allow you to easily control pixel tape or pixel dots from long distances.
Available for 5V, 12V or 24V systems, with power re-injected from an external source.

The essential link between your 5V Pixie Driver and your system, allowing you to send PLink data over standard Cat 6 cabling.

The PLink Injector converts PLink data from your Pixelator or Pixelator Mini, to allow you to easily control pixel tape or pixel dots from long distances.
Available for 5V, 12V or 24V systems, with power re-injected from an external source.

Controlling individual pixels reliably now at your fingertips. Combine the power and control using Pixie Driver, to realize previously unimaginable visual effects, right at your fingertips. Pre-programmed or live, Pixie Driver unlocks the full potential of pixel LED.
Available in 5V (110 WATTS), 12V (130 WATTS), or 24V (130 WATTS).

With 2,048 DMX channels per output, you get a total of 4,096 DMX channel, allowing you to drive up to 1,360 individual RGB pixels. 12V (outputting 260W) or 24V (the full 300W). Due to the smart design, your refresh rate won’t suffer if you’re using the Triton at its limits. The Pixel Triton has 2 x 3-pin pixel outputs, 2 x EtherCON connectors (input/output) and 1 x IEC power connector.

7 Volt power supply, complete with US, UK, EU and AU outlet adapters. From ODE to DMX Streamer. If you have an ENTTEC product that requires an external Power supply, then this is the only one you need. 100-240V Mains input. FCC, UL, cUL, TUV and CE approvals.

5 pin DMX Terminator to go at the end of a DMX chain. The 5 pin DMX terminator stops data reflections, which can cause problems in the DMX line, often stopping one light in the middle of the cable from working, whilst those on either side work perfectly.

3 pin DMX Terminator to go at the end of a DMX chain. The 3 pin DMX terminator stops data reflections, which can cause problems in the DMX line, often stopping one light in the middle of the cable from working, whilst those on either side work perfectly.

EU IEC mains lead

UK IEC mains lead

It boasts 60 colour-calibrated, individually-addressable, RGB LEDs per metre. Max. power consumption 11.5 watts per metre, 244 lumens per metre, 5V. Each pixel can achieve a 24-bit, True Colour display. That’s a whopping 16,777,216 possible colours for each LED chip, with a scan frequency not less than 400Hz per second.

The tape boasts 30 colour calibrated, high-quality RGB LEDs per metre. Each LED is patched as an individual pixel, achieves 16,777,216 full colour display. Suitable for various stage, architectural or entertainment applications. Max. power: 5.6 watt per metre. Lumen: 122 lumen per metre. 5V. Each pixel, scan frequency not less than 400Hz per second. Rated IP20; only indoor use.

The tape boasts 60 colour calibrated, high-quality RGB LEDs per metre. Each LED is patched as an individual pixel, achieves 16,777,216 full colour display. Suitable for various stage, architectural or entertainment applications. Max. power: 11.3 watt per metre. Lumen: 244 lumen per metre. 5V. Each pixel, scan frequency not less than 400Hz per second. Rated IP20; only indoor use.

Every 3 LEDs is patched as an individual pixel on this 60 colour calibrated, With 3 LEDs grouped into individually addressable pixels, this tape is suitable for both stage, architectural or entertainment applications. Max. power: 12,84 watts per metre. 250 lumens per metre. 12V. Each pixel achieves 16,777,216 full-colour display, scan frequency not less than 400Hz per second. Rated IP20.

The tape boasts 30 colour calibrated high-quality RGBW LEDs per metre. Each LED is patched as an individual pixel and offers consistent brightness and extended colour gamut. Max. power 6.5 watt per metre, 201 lumen per metre, 5V. Each pixel can achieve 4,294,967,296 full colour display, scan frequency not less than 400Hz per second. Rated IP20. Indoor use only.

8PX60-12-B boasts 60 colour-calibrated, individually controllable, RGB pixels per metre. Each pixel offers consistent brightness and extended colour gamut. Max. power consumption 8.5 watts per metre (RGB all on). 122 lumens per metre, 12V. Each pixel achieves a 24-bit, True Colour display; whopping 16,777,216 possible colours for each LED chip, scan frequency 2KHz.