- System type: 2-way bass reflex
- MAX SPL (@1m): 125 dB
- Frequency response (-10 dB): 68Hz-20kHz
- HF: 1" (25mm) driver
- LF: 8" - 2" VC (50mm)
- Coverage (H x V): 90° H x 60° V
- Crossover frequency: 2,1kHz
- Amplifier class: D + A/B
- RMS Power: 200 W
- Peak Power: 400 W
- Cooling: Convection
- DSP: 28/56 Bit
- Advanced Functions: FIR Filters
- Bluetooth: 5.0 (stereo)

- System type: Two way bass reflex
- MAX SPL: 126 dB
- Frequency Response (-10dB): 60Hz-20KHz
- HF: 1.35" (34mm) driver
- LF: 10" - 2" V.C (50mm)
- Coverage (H x V): 90° H x 60° V
- Crossover frequency: 1.8 kHz
- Amplifier class: D + A/B
- RMS Power: 200 W
- Peak Power: 400 W
- Cooling: Convection
- DSP: 28/56 Bit
- Bluetooth: 5.0 (stereo)

- System type: Two way bass reflex
- MAX SPL: 129 dB
- Frequency Response (-10dB): 54Hz-20KHz
- HF: 1.35" (34mm) driver
- LF: 12" - 2.5" V.C (65mm)
- Coverage (H x V): 90° H x 60° V
- Crossover frequency: 1.8 kHz
- Amplifier class: D
- RMS Power: 600 W
- Peak Power: 1200 W
- Cooling: Fan
- Advanced Functions: FIR Filters
- DSP: 28/56 Bit
- Bluetooth: 5.0 (stereo)

- System type: Two way bass reflex
- MAX SPL: 130 dB
- Frequency Response (-10dB): 50Hz-20KHz
- HF: 1.35" (34mm) driver
- LF: 15" - 2.5" V.C (65mm)
- Coverage (H x V): 90° H x 60° V
- Crossover frequency: 1.8 kHz
- Amplifier class: D
- RMS Power: 600 W
- Peak Power: 1200 W
- Cooling: Fan
- Advanced Functions: FIR Filters
- DSP: 28/56 Bit
- Bluetooth: 5.0 (stereo)

An essential piece of kit for a home recording studio setup, DSI sound interfaces allow for a smooth, user-friendly connection from a laptop to essential studio equipment, microphones or instruments, without compromising on recording quality.

Indeed, DSI’s microphone preamps and high-resolution converters (up to 24-bit / 192kHz), guarantee a clear and pristine sound, low noise level and a wide dynamic range to capture any detail of recordings. Moreover, a dedicated ASIO driver helps to significantly reduce latency times.

Featuring 2 combo Inputs with Phantom Power and Instrument swithches, plus monitor and headphone outputs, DSI-22 interface work seamlessly with Mac or PC, and its design allows for quick access to onboard controls and connectors (gain, monitor and headphones levels) from the front panel. DSI 22 also features a MIX knob enabling users to adjust headphones balance between the Input signals and the recorded signal, which is extremely useful for monitoring purposes.

An essential piece of kit for a home recording studio setup, DSI sound interfaces allow for a smooth, user-friendly connection from a laptop to essential studio equipment, microphones or instruments, without compromising on recording quality.

Indeed, DSI’s microphone preamps and high-resolution converters (up to 24-bit / 192kHz), guarantee a clear and pristine sound, low noise level and a wide dynamic range to capture any detail of recordings. Moreover, a dedicated ASIO driver helps to significantly reduce latency times.

Featuring 2 combo Inputs with Phantom Power and Instrument swithches, plus monitor and headphone outputs, DSI-22 interface work seamlessly with Mac or PC, and its design allows for quick access to onboard controls and connectors (gain, monitor and headphones levels) from the front panel. DSI 22 also features a MIX knob enabling users to adjust headphones balance between the Input signals and the recorded signal, which is extremely useful for monitoring purposes.

The compact, versatile headphone amplifier able to get the most from any professional headphone. Practically speaking, HP-24 not only allows up to 4 users to listen at the same time but also customizes the sound experience to suit the needs of sound engineers, musicians, and performers, while maintaining the optimal audio performance.

HP-24 perfectly combines the ability to apply high gain with very low distortion levels. The amplifier features L/R balanced inputs. The central knob controls the amplification level of the audio signal, while the LED meter displays the stereo audio level, visually reporting possible saturation/clipping.

Each of the 4 channels has an independent level control. A dedicated button allows switching the signal from stereo to mono and vice versa, when necessary. In addition to this, auxiliary input and output also allow multiple HP-24 modules to be connected together, increasing the total number of available channels when needed. The ground terminal eliminates any buzz due to connection between different devices.

M8M is a Multimedia Bluetooth Monitor system designed for use in pairs, where one module is equipped with amplifier, inputs, and controls, and supplies power and audio signal to the second passive module.

This stereo kit is characterised by the versatility of inputs, which multiplies the possibilities of use for this evolution of the classic studio monitor. There are balanced RCA and TRS inputs, an auxiliary input with a minijack connection, and also a Bluetooth receiver, which makes the system perfect for multimedia playback.

On the back of the primary module, you'll find EQ controls for adjusting high and low frequencies.

Note that on-board controls such as main volume, power switch, the Bluetooth pairing button, and even the AUX Input and headphones OUT are conveniently located in the front of the primary unit for ease of access.

A series of small design solutions that combine the reproduction quality needed for professional use with the small conveniences needed for a chill-out listening experience in the tranquility of your own home.

Equipped with a 8” woofer, plus a 1” tweeter for extremely smooth HF reproduction, this active nearfield monitor features a wide and extremely linear frequency response and has been designed keeping in mind the requirements of a reference listening both for professional recording studios or advanced home studios.

M8S feature both unbalanced (RCA) and balanced (TRS/XLR) audio inputs. Onboard preset EQ controls (High Pass Filter and HF Level), plus of course the main level knob, enhance the linearity of the reproduction and optimize listening according to the acoustic conditions of the environment.

The aluminum inlay ear cup body mounts a 40mm drivers; the 32-ohm system impedance ensures an optimal sound pressure with all types of devices, while the wide frequency response allows for the most detailed listening experience even in the lowest frequencies.

A closed-back circumaural design provides the user with good isolation from external interferences, while the eco-leather-covered memory foam pads and headset provide maximum comfort.

The complete headset comes with 3 different removable cables: 2 x 3m flat or helix cables with mini-jack connector, and 1 x 1m flat cable with mini-jack connector, plus 1 x stereo mini-jack-jack adapter and a soft case.

Our 2-channel Active Direct Input Box.
The Direct Box MDI-2 is available in two versions: active (MDI-2A powered by 9V battery) and passive (MDI-2P).

DI boxes are essential to optimise the signal management of high impedance instruments such as keyboards, guitars and electric basses. A crucial partner in the studio and on stage, each MDI-2 provides for signal balancing and impedance matching of any audio signal.
The device is equipped with TRS or RCA L/R unbalanced Inputs, XLR balanced L/R OUT, as well as an attenuation selector [0 dB -20 dB -30 dB] for both left and right channel input signal.

It is also possible to take repetitions of the input signals through the convenient THRU connectors on the front panel, while the Ground button eliminates possible hums on both output signals.

MDI-2M is a powerful, easy-to-use device that combines the features of a high quality D/A converter (up to 192 kHz - 24 bit) and a DI box in a compact, rugged and lightweight unit.
It allows you to send a balanced, high quality audio signal that is free of noise from your mobile devices to a mixer, PA system or studio monitor.

The headphones output allows you to monitor the stereo or mono signal.
This a completely plug & play device, iOS and Android compatible.

With additional USB-C Power supply MDI-2M charges your device also during playback

Our 2-channel Passive Direct Input Box.
The Direct Box MDI-2 is available in two versions: active (MDI-2A powered by 9V battery or Phantom power) and passive (MDI-2P).

D.I. boxes are essential to optimise the signal management of high impedance instruments such as keyboards, guitars and electric basses. A crucial partner in the studio and on stage, each MDI-2 provides for signal balancing and impedance matching of any audio signal.
The device is equipped with TRS or RCA L/R unbalanced Inputs, XLR balanced L/R OUT, as well as an attenuation selector [0 dB -20 dB -30 dB] for both left and right channel input signal.

It is also possible to take repetitions of the input signals through the convenient THRU connectors on the front panel, while the Ground button eliminates possible hums on both output signals.

MDI-2U is a powerful, easy-to-use device that combines the features of a high quality D/A converter (up to 192 kHz - 24 bit) and a DI box in a compact, rugged and lightweight unit.

It allows you to send a balanced, high quality audio signal that is free of noise from your laptop to a mixer, PA system or studio monitor.

The headphones output allows you to monitor the stereo or mono signal.

This a completely plug & play device, PC and Mac compatible, that does not require any drivers.

6x full-range 3.25" (1” V.C.) for each Top
2x 12" (3” V.C.) woofers
Effortless Setup
Integrated 8-Channel Mixer
1000 W RMS Amplifier

- Effortless Setup
- Integrated RDNet Hardware
- 1600 W RMS Amplifier
- Multiple configurations

- Powerful yet versatile sub
- Integrated RDNet Hardware
- 1600W RMS Amplifier
- Multiple configurations

Nettuno 50, the flagship model of the Nettuno Series. Designed for medium to large venues, this system features an active two-way top and two active subwoofers, all powered by a cutting-edge amplifier delivering a formidable 1600 W RMS of power.

The active two-way top is equipped with two 12” woofers (2.5” V.C.) and a compression driver with a 1.4” horn-loaded output (3” V.C.) boasting a 100°x50° coverage (HxV), ensures an unparalleled auditory spectacle.

Absolute must-have for producers and sound engineers, CR 44 is the passive controller that allows the management of two pairs of monitors, for professional and home studio reference listening.

A small, compact and complete audio control room, CR-44 features two pairs of outputs on balanced XLR connectors (monitor A, monitor B), one pair of inputs on balanced XLR connectors (Input A), and on balanced TRS connectors (Input B) or 3.5 mm stereo mini-jack.

Passive volume control ensures transparent attenuation of the audio signal. On-board controls enable input and output selection, volume, muting, 20 dB attenuation, MONO function, and, last but not least, the Side Listen function, which allows selective listening to the stereo mix in its most "lateral" spatial zones.

CV-L206 COVER

Transport Cover for R108

Transport Cover for R110

Transport Cover for R112