A 19" Fixed shelf made of steel with a thickness of 1,2 mm with a black structural powder coating. The shelf can be used to store equipment which doesn't contain a standard 19" mounting fixture. For use with SPR racks only.

A 19" Fixed shelf made of steel with a thickness of 1,2 mm with a black structural powder coating. The shelf can be used to store equipment which doesn?t contain a standard 19" mounting fixture. For use with SPR racks only.

A 19" Fixed shelf made of steel with a thickness of 1,2 mm with a black structural powder coating. The shelf can be used to store equipment which doesn?t contain a standard 19" mounting fixture. For use with WPR HPR racks only.

A 19" Fixed shelf made of steel with a plate thickness of 1,2 mm and provided with a black (RAL9004) structured powder coating. The shelf can be used to store equipment which doesn't contain a standard 19" mounting fixture. For use WPR racks only.

The SPR10DC is a dust cover brush which is meant to be used for covering the cable inlets which are provided in the SPR, WPR & HPR Racks. When the racks are installed in industrial environments, through time dust and dirt will enter the racks through all small gaps and openings. In the longer term, this can have a negative influence on the performance of the equipment which is installed in th

A 19" L-Rail set made of 1,2 mm thick cold rolled steel with a black structural powder coating. The rail provides extra support when mounting heavy equipment and the mounting distance can be adjusted to your needs. For use with SPR600 and OPR3xxA series only.

A 19" L-Rail set made of 1,2 mm thick cold rolled steel with a black structural powder coating. The rail provides extra support when mounting heavy equipment and the mounting distance can be adjusted to your needs. For use with SPR800 series only.

A 19" L-Rail set made of 1,2 mm thick cold rolled steel with a black structural powder coating. The rail provides extra support when mounting heavy equipment and the mounting distance can be adjusted to your needs. For use with WPR, OPR3xxA and HPR series only.

A 19" L-Rail set made of 1,2 mm thick cold rolled steel with a black structural powder coating. The rail provides extra support when mounting heavy equipment and the mounting distance can be adjusted to your needs. For use with WPR, OPR3xxA and HPR series only.

A 19" cooling roof fan unit made out of black (RAL9004) powder coated aluminum which is used to improve the air circulation and help remove hot air from the rack. The fan runs at medium speed and needs to be fed with 240VAC at 50/60Hz. For use with SPR600 series only.

A 19" cooling roof fan unit made out of black (RAL9004) powder-coated aluminium which is used to improve the air circulation and help remove hot air from the rack. The fan runs at medium speed and needs to be fed with 240VAC at 50/60Hz. For use with SPR800 series only.

A 19" rack plinth made of steel with a plate thickness of 1,2 mm and provided with a black(RAL9004) structured powder coating. The plinth raises the rack off the floor and by doing this allowing easy cable access. For use with SPR600 series only.

A 19" rack plinth made of steel with a plate thickness of 1,2 mm and provided with a black(RAL9004) structured powder coating. The plinth raises the rack off the floor and by doing this allowing easy cable access. For use with SPR800 series only

The WPR10RF is a 120 mm sleeve bearing axial ventilation fan for installation in the top compartment of the WPR racks to improve the air circulation through the cabinet. The heated air caused by the dissipation of the devices installed in the cabinet will rise and will be rapidly drained due to the under pressure caused by the fan. The constant air flow will improve a positive influence to the pe