-Dimensions 250×200×40mm
-Weight: 1.6kg
-Power: USB
-Connections: DMX-in, DMX-out
-USB for connection to PC/Mac
-Controls: 10 faders, 30 scene/ chase
-Options AC612 Editor software

-Intended for wall mounting
-DMX input and output via screw terminals.
-External power supply (not included), 9-24Vdc, 200mA
-Dimension: 180×80×22 mm
-Weight: 0.45 kg

-Intended for wall mounting
-DMX input and output via screw terminals.
-External power supply (not included), 9-24Vdc, 200mA
-Dimension: 180×80×22 mm
-Weight: 0.45 kg

-Intended for wall mounting
-DMX input and output via screw terminals.
-External power supply (not included), 9-24Vdc, 200mA
-Dimension: 180×80×22 mm
-Weight: 0.45 kg

-Intended for wall mounting
-DMX input and output via screw terminals.
-External power supply (not included), 9-24Vdc, 200mA
-DMX-in: 5-pin XLR
-DMX-out: 5-pin XLR
-Supplied with universal USB power supply
-Dimension: 180×80×22 mm
-Weight: 0.45 kg

-Intended for wall mounting
-DMX input and output via screw terminals.
-External power supply (not included), 9-24Vdc, 200mA
-DMX-in: 5-pin XLR
-DMX-out: 5-pin XLR
-Supplied with universal USB power supply
-Dimension: 180×80×22 mm
-Weight: 0.45 kg

ELC light controller AC 612 DIN DMX sequence player in DIN cabinet

-50 Recordable cue states
-Merged DMX input from the lighting desk
-Individual channels and groups can be addressed and stored
-May be used without the main lighting desk being active
-Provides remote control and backup desk functionality
-Range: 75m (internal venue) 200m (open space)

-UHF 433,92 MHz, 10mW max
-16 illuminated buttons
-Dimensions: 115×65×20 mm
-Weight: 280 g
-Power Supply: 9V Block

-Built-in power supply 100- 240VAC, 10VA max
-5-pin XLR male (Input) and female (Output)
-Dimensions: 200×150×44 mm
-Weight: 1.4 kg

-Connections: 4x Neutrik 5P DMX connectors, 1x Powercon True1 inlet-oulet, 2 x Neutrik RJ45 Ethercon, 2x SUBD9 for RS-232 and GPI , USB, XLR3 for LTC time code
-Controls: TFT multicolor display and rotary encoder/pushbutton for setup menu selection
-Dimensions: 19"×1U x165mm
-Weight: 2.5kg
-Power: 100-240VAC Switched PSU on PowerconTrue1
-Power consumption: max 10W

-Dimensions: 6 x 7.8 x 2in, 1.3kg
-Power: 100-240VAC 50/60Hz, fixed mains lead
-Connections: XLR (M) DMX-in, XLR (F) DMX-out, USB, 1/4" jack for play/loop remote control
-Controls: Record, stop, play, loop: illumated push buttons on front panel
-Supplied: DMS, operator leaflet

-1 DMX input with an additional, optically isolated "Thru-Out"
-5 DMX outputs,
-Dimensions: 200×150 x- 44 mm
-Dimensions: 105×85×60 mm (DIN)
-Weight: 1.5 kg
-Weight: 0.15 kg (DIN)
-Built-in UPS 100-240VAC
-Power supply via screw terminals with external power supply 9-24V DC (DIN) (not included)

-1 DMX input with an additional, optically isolated "Thru-Out"
-5 DMX outputs,
-Dimensions: 200×150 x- 44 mm
-Dimensions: 105×85×60 mm (DIN)
-Weight: 1.5 kg
-Weight: 0.15 kg (DIN)
-Built-in UPS 100-240VAC
-Power supply via screw terminals with external power supply 9-24V DC (DIN) (not included)

ELC light controller DT125 DIN - DIN Cabinet splitter, 1 in 5, RDM Compatible

ELC light controller DT125 DIN FI - DIN Cabinet splitter, 1 in 5, Full isol, RDM

-Connections: 2×XLR5 (M) DMX-In, 2×XLR5 (F) DMX-Thru
-Controls: push-button for setup A or B selection
-Dimensions: 19"×1U x165mm
-Weight: 2.5kg
-Power: 100-240VAC, fixed mains cord

Decora insert (USA)

Decora insert (USA)

-Dimensions: 90×65×40 mm
-Weight: 150 g
-Input: max. 2.5W
-Connections: 2x DMX 512 via Neutrik XLR 5-pin female, 1x Ethernet 10/100MBit via RJ45, 1x USB (for configuration and power supply)
-Controls: RGB LED Indicator, clear button
-Additionally required: external USB power supply

-DMX OUT or IN via XLR 5 or XLR 3
-Dimensions: 85×75×45 mm
-Power Supply via POE or external
-Weight: 300 g

-DMX OUT or IN via XLR 5 or XLR 3
-Dimensions: 85×75×45 mm
-Power Supply via POE or external
-Weight: 300 g

-DMX OUT or IN via screw terminal (configurable via dmXLAN software)
-Network connection via RJ45
-Power Supply via POE or external 12VDC via screw terminals
-Status LED for LAN and DMX
-Dimensions: 3U, 53×90×58 mm
-Weight: 90 g

-The unit can be powered via the built-in universal power supply from 100 - 240VAC or via the network cable or POE versions
-Dimensions: 200×150×44 mm
-Weight: 1.5 kg

-The unit can be powered via the built-in universal power supply from 100 - 240VAC or via the network cable or POE versions
-Dimensions: 200×150×44 mm
-Weight: 1.5 kg

-3 DMX ports via screw terminals can be configured as input or output
-Two network ports via RJ45 plug-in contacts that can be used at the same time as they are connected via an internal switch
-Power supply: via screw terminals with external power supply 9-24V DC (not included) or PoE
-Control: LEDs for power, DMX 1, 2, 3 and network link
-Dimensions: 105×85×60 mm
-Weight: 0.2

-Dimensions: 140×87×52 mm
-Power is supplied via Power over Ethernet (PoE)
-Weight: 560g

-Power Supply: 100 - 240VAC, 50 - 60Hz, max. 10VA.
-8x bidirectional DMX connections via XLR 5-pin Socket
-Powercon True1 in-outlet
-2x Neutrik RJ45 Ethercon chassis
-Dimensions: 483×150×44 mm
-Weight: 2 kg

-Power Supply: 100-240VAC, 50-60Hz, max. 10VA.
-8x bidirectional DMX connections via XLR 5-pin Socket
-Powercon True1 in-outlet
-2x Neutrik RJ45 Ethercon
-Dimensions: 483×150×44 mm
-Weight: 2 kg

-Connections: 1 ×10/100Mbit Ethernet
-Ethercon (uplink)
-4×10/100Mbit Ethernet ports
-Ethercon with PoE
-Indicators Green LED: Power on. Yellow LED per port: port active
-Dimensions: 200×150×44 mm
-Power: 100-240VAC 50/60Hz

-Dimensions: 19"×1U x165mm
-Weight: 2,85 Kg
-Power: 100-240VAC, 50 - 60Hz, Switched PSU on PowerconTrue1 Consumption: max 120W
-Heat dissipation: max 10W
-Connections: 16x Neutrik RJ45 Ethercon , 1x Powercon True1 inlet-outlet, 2x SFP cages
-Controls: TFT multicolor display and rotary encoder/pushbutton for setup menu selection

-Dimensions: 19"×1U x165mm
-Weight: 2,85 Kg
-Power: 100-240VAC, 50 - 60Hz, Switched PSU on PowerconTrue1 Consumption: max 120W
-Heat dissipation: max 10W
-Connections: 16x Neutrik RJ45 Ethercon , 1x Powercon True1 inlet-outlet, 2x SFP cages
-Controls: TFT multicolor display and rotary encoder/pushbutton for setup menu selection

-Dimensions: 19"×1U x165mm
-Weight: 2,85 Kg
-Power: 100-240VAC, 50 - 60Hz, Switched PSU on PowerconTrue1 Consumption: max 120W
-Heat dissipation: max 10W
-Connections: 16x Neutrik RJ45 Ethercon , 1x Powercon True1 inlet-outlet, 2x SFP cages
-Controls: TFT multicolor display and rotary encoder/pushbutton for setup menu selection

-Dimensions: 19"×1U×165mm
-Weight: 2,45Kg
-Power: 100-240VAC, 50 - 50Hz, Switched PSU on PowerconTrue1 Consumption: max 60W
-Heat dissipation: max 10W
-Connections: 8 × Neutrik RJ45 Ethercon , 2 × Powercon True1, 2 × SFP cages
-Controls: TFT multicolor display and rotary encoder/pushbutton for setup menu selection

-Dimensions: 19"×1U×165mm
-Weight: 2,45Kg
-Power: 100-240VAC, 50 - 50Hz, Switched PSU on PowerconTrue1 Consumption: max 60W
-Heat dissipation: max 10W
-Connections: 8 × Neutrik RJ45 Ethercon , 2 × Powercon True1, 2 × SFP cages
-Controls: TFT multicolor display and rotary encoder/pushbutton for setup menu selection

-Dimensions: 19"×1U×165mm
-Weight: 2,45Kg
-Power: 100-240VAC, 50 - 50Hz, Switched PSU on PowerconTrue1 Consumption: max 60W
-Heat dissipation: max 10W
-Connections: 8 × Neutrik RJ45 Ethercon , 2 × Powercon True1, 2 × SFP cages
-Controls: TFT multicolor display and rotary encoder/pushbutton for setup menu selection

ELC light controller 19" Rack mounting kit for DT125/DT221/Node3/DMS/FHS2/SWITCH5