- Frequency Response: 48Hz-20kHz ± 3dB
- Sensitivity: 97dB @ 2.83 volts / 1 meter
- Nominal Impedance: 8 ohms compatible
- High Frequency Crossover: 1400Hz
- Power Handling: 150 watts maximum continuous (600 watts peak)
- Enclosure Type: Bass reflex via front-mounted port

- Frequency Response: 48Hz-20kHz ± 3dB
- Sensitivity: 97dB @ 2.83 volts / 1 meter
- Nominal Impedance: 8 ohms compatible
- High Frequency Crossover: 1400Hz
- Power Handling: 150 watts maximum continuous (600 watts peak)
- Enclosure Type: Bass reflex via front-mounted port

- 100W RMS Power Output
- 2-Way Speaker Design
- Dual 5.25" Cerametallic Cone Woofers
- 1" Titanium Dome Tweeter

- Frequency Response: 80Hz-20kHz ± 3dB
- Sensitivity: 96dB @ 2.83 volts / 1 meter
- Nominal Impedance: 8 ohms compatible
- High Frequency Crossover: 2100Hz
- Power Handling: 100 watts maximum continuous (400 watts peak)
- Enclosure Type: Sealed
- Enclosure Material: Medium density fiberboard construction (MDF)

- Frequency Response: 20-200Hz ±3dB
- Max Acoustic Output: 130dB @ 30Hz, 122dB @ 20Hz, 112dB @ 15Hz 1/8 space, 1M (2 enclosures side-by-side per THX Ultra2)
- Nominal Impedance: 8 ohms
- Enclosure Type: Bass-reflex via front-firing slot port
- Amplifier Type: Use only with KA-1000-THX
- Amplifier Power: See KA-1000-THX specifications

- Delivers 1000-watts into a 4 ohm load
- Can support two high performance subwoofers
- Finished in black with a machined aluminum front panel and knobs

- System Type: 2-way In-wall
- Frequency Response: 80Hz-20kHz +/- 3dB
- Power Handling: 150W/600W
- Sensitivity: 91dB
- Impedance: 8 Ohms
- Crossover Frequency: 2300Hz
- High Frequency Driver: 1" (2.5cm) Titanium dome compression driver mated to 80° x 80° Tractrix Horn
- Low Frequency Driver: 8" (20cm) Aluminum Cone Woofer

- System Type: 2-way In-wall
- Frequency Response: 80Hz-20kHz +/- 3dB
- Power Handling: 100W/400W
- Sensitivity: 90dB
- Impedance: 8 Ohms
- Crossover Frequency: 2130Hz
- High Frequency Driver: Two 1" (2.5cm) Titanium dome neodymium tweeters in a diffuse Tractrix horn array
- Low Frequency Driver: 8" (20cm) Aluminum Cone Woofer

- System Type: 2-way In-ceiling
- Frequency Response: 45 Hz - 20 kHz +/- 3dB
- Power Handling: 100W/400W
- Sensitivity: 93dB
- Impedance: 8 Ohms compatible
- Crossover Frequency: 1200 Hz & 1800 Hz
- High Frequency Driver: 1" Titanium tweeter in a 7.5 x 3.75" 60-90-110 VCT 45º Skewed horn
- Low Frequency Driver: Two 5.25" Cerametallic Woofers

- System Type: 2-way In-ceiling
- Frequency Response: 45 Hz - 20 kHz +/- 3dB
- Power Handling: 100W/400W
- Sensitivity: 93dB
- Impedance: 8 Ohms
- Crossover Frequency: 2500Hz
- High Frequency Driver: Two 1" Titanium tweeters in vertically stacked tractrix horns
- Low Frequency Driver: Two 5.25" Cerametallic Woofers

- System Type: 2-way In-wall
- Frequency Response: 46 Hz - 20 kHz +/- 3dB
- Power Handling: 150W/600W
- Recommended Amp Power: 150W
- Sensitivity: 92 dB
- Impedance: 8 Ohms compatible
- High Frequency Driver: 1" (2.5cm) Titanium diaphragm compression driver mated to 90° x 90° square Tractrix® Horn
- High Frequency Crossover: 250 Hz & 2100 Hz

- System Type: 2-way In-wall
- Frequency Response: 46Hz-20kHz +/-3dB
- Power Handling: 100W/400W
- Recommended Amp Power: 150W
- Sensitivity: 92dB @ 2.83V / 1m
- Impedance: 8 Ohms switchable
- High Frequency Driver: 1" (2.5cm) Titanium diaphragm compression driver mated to 90° x 90° square Tractrix Horn
- High Frequency Crossover: 2100Hz & 1200Hz