- accommodates all 12" mixers from 25,4 cm to 32,2 cm (wide) X 42,0 cm (high)
- outer dimensions: 382 x 482 x 226 mm
- inner dimensions: 322 x 420 x 80 mm
- handle on right side
- butterfly catch on front side with take-apart hinges on the back
- lined with foam for a tight fit for any 12" mixer up to 32,2cm wide including pioneer DJM600/DJM500

- Accommodates all 10" mixers from 19,7cm to 27,3 cm (wide) X 46,99 cm (high)
- outer dimensions: 327 x 535 x 244 mm
- inner dimensions: 278 x 485 x 210 mm
- take-out door on front side for controls/connections
- handle on top
- 2 butterfly catches on front side with take-apart hinges on te back
- lined with foam for a tight fit for any 10" mixer up to 27,3cm wide

- Accommodates all 12" mixers from 25,4 cm to 32,2 cm (wide) X 42,0 cm (high)
- outer dimensions: 382 x 482 x 226 mm
- inner dimensions: 322 x 420 x 80 mm
- handle on right side
- butterfly catch on front side with take-apart hinges on te back
- lined with foam for a tight fit for any 12" mixer up to 32,2cm wide including pioneer DJM600/DJM500

- fits almost any 19" mixer / effect unit up to 6 Units
- 6 Unit slant rack
- outer dimensions: 545 x 380 x 250 mm
- handle on front side of lid (1 total)
- butterfly catches on left and right side (2 total)

- universal 19" mixer case for NON-rackmountable 19" mixers
- outer dimensions: 552 x 600 x 274 mm
- inside dimensions: 458 x 540 x 196 mm
- handles on front and back side (2 total)
- butterfly catches on left and right side (2 total)

- Accommodates most 19" mixers or lighting controllers (up to 6U high)
- outer dimensions: 469 x 523 x 226 mm
- inner dimensions: 501 x 447 x 169 mm
- handle on front & back sides
- butterfly catches on left and right side
- with slanted 19" rack rails for fixing equipment

- universal 19" mixer case with rack rails
- slanted 19" rack rails
- outer dimensions: 545 x 660 x 270 mm
- inside dimensions: 465 x 612 x 170 mm
- handles on front and back side (2 total)
- butterfly catches on left and right side (2 total)
- fits most 19" rack mountable mixers

- Accommodates all 10" mixers from 19,7cm to 27,3 cm (wide) X 46,99 cm (deep)
- Integrated ventilated tilting laptop stand
- outer dimensions: 521x 318 x 229 mm
- take-out door on front side for controls/connections
- handle on top
- 1 butterfly catch on right side with take-apart hinges on the left
- Fits: Pioneer DJM 350, Rane TTM57SL, Rane 62

- outside dimensions: 545 x 437 x 244 mm
- inside dimensions: 455 x 385 x 160 mm
- handle on front side
- butterfly catches on front side (2 total) with take-apart hinges on the back
- lined with removeable foam for different sized turntables

- outer dimensions: 545 x 437 x 244 mm
- handle on front side
- butterfly catches on front side (2 total) with take-apart hinges on te back
- lined with removeable foam for different sized turntables

- outer dimensions: 278 x 437 x 228 mm
- take out, front access door
- handle on left side (1 total)
- butterfly catch on right side, with take-apart hinges on left side
- lined with adjustable, modular foam for tight fit
- fits all top and front loading CD players measuring op to 35,6 cm deep

- outer dimensions: 387 x 472 x 229 mm
- take out, front access door
- with fan on the bottom for cooling
- handle on left side
- butterfly catch on right side (1 total) with take-apart hinges on te left
- lined with foam for tight fit

- outside dimensions: 300 x 460 x 236 mm
- inside dimensions: 243 x 403 x 156 mm
- handle on left side (1 total)
- butterfly catch on right side, with take-apart hinges on left side
- lined with foam for tight fit of Pioneer XDJ-700 USB media player

- outer dimensions: 468 x 308 x 236 mm
- fits 1x Pioneer xdj-700
- handle on the left side
- butterfly on right side, hinges on the left
- equipment in picture not included

- outer dimensions: 537x390x216mm
- take out, front access door
- handle on left side
- butterfly catch on right side (1 total) with take-apart hinges on te left
- lined with adjustable, modular foam for tight fit
- fits Pioneer CDJ2000NXS2

- outer dimensions: 400 x 537 x 216 mm
- handle on left side
- butterfly catch on right side (1 total) with take-apart hinges on te left
- lined with adjustable, modular foam for tight fit
- fits Pioneer DJM900NXS2

- Case for Pioneer DDJ-SX or DDJ-RX controller
- 743 x 539 x 222 mm (outer dimensions)
- take out, front access door
- butterfly catches on left and right side (2 total), with take apart hinges on back side
- Carry handle on left and right side (2 total)
- Lined with foam for tight fit of Pioneer DDJSX or DDJ-RX

- Case for small controllers.
- Fits all controllers smaller then 520*300mm
- 590 x 275 x 470 mm (outer dimensions)
- integrated folding laptop stand
- take out, front access door
- butterfly catches on left and right side (2 total) with take-apart hinges on the back
- Carry handle on left, right and back side (3 total)
- Lined with foam for tight fit of controller

- Case for Pioneer DDJ-SR or DDJ-RR controller with sliding laptop tray (305mm depth)
- 679 x 474 x 214 mm (outer dimensions)
- butterfly catches on left and right side
- Carry handle on back side
- Lined with grey carpet in cover inside
- Lined with foam for tight fit of Pioneer DDJSR or DDJ-RR

- Case for Pioneer DDJ-SZ or DJJ-RZ controller
- 940 x 585 x 226 mm (outer dimensions)
- take out, front access door
- butterfly catches on front and back side (4 total)
- Carry handle on left, right and back side (3 total)
- Lined with foam for tight fit of Pioneer DDJSZ or DDJ-RZ

- Case for Pioneer controller ddj800 and ddj1000l with laptop tray
- 837x519x242mm (outer dimensions)
- 712x470mm inner dimensions. Inner height base : 170mm Inner height cover: 90mm
- 2 butterfly catches on front, 1 left side, 1 right side.
- Carry handle on back, left and right side

- Case for Pioneer controller ddj1000 with laptop tray
- 837x519x242mm (outer dimensions)
- 712x470mm inner dimensions. Inner height base : 170mm Inner height cover: 90mm
- 2 butterfly catches on front, 1 left side, 1 right side.
- Carry handle on back, left and right side

- Case for Pioneer DDJ-SX or DDJ-RX controller
- sliding laptop tray (305mm depth)
- 789 x 491 x 203 mm (outer dimensions)
- butterfly catches on left and right side (2 total)
- Carry handle on back side (1 total)
- Lined with grey carpet in cover inside
- Lined with foam for tight fit of Pioneer DDJSX or DDJ-RX

- Case for Pioneer DDJ-SX or DDJ-RX controller
- 743 x 539 x 222 mm (outer dimensions)
- take out, front access door
- built-in folding laptop stand
- butterfly catches on left and right side (2 total), with take apart hinges on back side
- Carry handle on left and right side (2 total)
- Lined with foam for tight fit of Pioneer DDJSX or DDJ-RX

- Case for Pioneer DDJ-SZ or DDJ-RZ controller
- built-in folding laptop stand
- 940 x 585 x 241 mm (outer dimensions)
- take out, front access door
- butterfly catches on front and back side (4 total)
- Carry handle on left, right and back side (3 total)
- Lined with foam for tight fit of Pioneer DDJSZ or DDJRZ

- outer dimensions: 821 x 505 x 251 mm
- inner dimensions: 756 x 442 x 143 mm
- butterfly catches on left, right and backside
- carry handle on side
- lined with grey carpet in cover inside
- takeout panel on front side
- lined with foam for tight fit of Pioneer XDJ-RX or XDJ-RX2

- Case for Pioneer XDJ-RX system with sliding laptop tray (305mm depth)
- 869 x 521x 201 mm (outer dimensions)
- butterfly catches on left and right side
- Carry handle on back side
- Lined with grey carpet in cover inside
- Lined with foam for tight fit of Pioneer XDJRX or XDJ-RX2

- Case for Pioneer DDJ-SZ or DDJ-RZ controller
- built-in folding laptop stand
- low profile wheels on left side
- 940 x 585 x 241 mm (outer dimensions)
- take out, front access door
- butterfly catches on front and back side (4 total)
- Carry handle on left, right and back side (3 total)
- Lined with foam for tight fit of Pioneer DDJSZ or DDJ-RZ

- Case for Pioneer DDJ-SZ or DDJ-RZ controller
- with sliding laptop tray (305mm depth)
- 995 x 568 x 227mm (outer dimensions)
- butterfly catches on left and right side + 2x on back side
- Carry handles on left, right & back side (3 total)
- Lined with grey carpet in cover inside
- Lined with foam for tight fit of Pioneer DDJSZ or DDJ-RZ
- recessed wheels on one side

- outer dimensions: 1068x699x234mm
- handle on left and right side
- butterfly catches on left and right and front side (4 total)
- small built-in wheels on left side
- lined with adjustable, modular foam for tight fit
- with sliding laptoptray
- fits Pioneer DDJ-RZX

- outer dimensions: 379 x 567 x 229 mm
- inner dimensions: 316 x 504 x 154 mm
- handle on left side
- butterfly catche on right side (1 total)
- lined with foam for a tight fit of the Denon X1800 dj mixer

- outer dimensions: 390 x 542 x 229 mm
- inner dimensions: 327 x 479 x 154 mm
- handle on left side
- butterfly catche on right side (1 total)
- lined with foam for a tight fit of the Denon SC5000 media player

- lined with adjustable, modular foam for tight fit
- fits Denon MCX8000

- flightcase for Denon DJ controller prime 4
- with removable front
- overall outside diameter : 804*660*260mm