- Type: In-celling - Stereo 2-way coaxial
- Drivers: 6 1/2" Dual voice coil Polyglass Midbass, 2 x 1" AI inverted dome Tweeters
- Sensitivity (2.83V/1m): 89dB
- Freq. response (+/-3dB): 60Hz-23kHz
- Low freq. point (-6dB): 48Hz
- Nominal impedance: 2x8 Ohms
- Min. impedance: 2x6,7 Ohms
- Recommended ampli power: 25-100W

- Type: 2-way in-ceiling
- Drivers: 2 x 5" Polyglass woofers, 1" inverted dome tweeter, 8" Polyglass passive radiator
- Sensitivity (2.83V/1m): 92dB
- Frequency response (+/-3dB): 65Hz - 23kHz
- Low frequency point (-6dB): 55Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 4.6 Ohms
- Recommended amplifier power: 25 - 120W

- Type: in-wall/In-celling - 2-way coaxial
- Drivers: 5" Polyglass Midbass, 1" AI inverted dome Tweeter\r
- Sensitivity (2.83V/1m): 88dB
- Frequency response (+/-3dB): 65Hz-23kHz
- Low frequency point (-6dB): 56Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 7,3 Ohms
- Recommended amplifier power: 15-100W

- Type: In-wall/In-celling - 2-way coaxial
- Drivers: 6 1/2" Polyglass Midbass, 1" AI inverted dome Tweeter
- Sensitivity (2.83V/1m): 89dB
- Frequency response (+/-3dB): 62Hz-23kHz
- Low frequency point (-6dB): 50Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 7.3 Ohms
- Recommended amplifier power: 25-100W

- Type: in-wall/In-celling 2-way coaxial
- Drivers: 8" Polyglass Midbass, 1" AI inverted dome Tweeter
- Sensitivity (2.83V/1m): 90dB
- Frequency response (+/-3dB): 53Hz-23kHz
- Low frequency point (-6dB): 40Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 6,9 Ohms
- Recommended amplifier power: 25-150W

- Type: in-wall 2-way
- Drivers: 6 1/2" Polyglass Midbass, 1" AI inverted dome Tweeter
- Sensitivity (2.83V/1m): 89dB
- Frequency response (+/-3dB): 60Hz-23kHz
- Low frequency point (-6dB): 48Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 7,2 Ohms
- Recommended amplifier power: 25-120W

- Type: D'appolito In-wall 2-way
- Drivers: 2 x 5" Polyglass Midbass, 1" AI inverted dome Tweeter
- Sensitivity (2.83V/1m): 90,5dB
- Frequency response (+/-3dB): 55Hz-23kHz
- Low frequency point (-6dB): 43Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 3,8 Ohms
- Recommended amplifier power: 25-120W

- Type: Outdoor loudspeaker
- Speakers: Aluminum inverted dome tweeter6 1/2" waterproof woofer with Polyglass treatment
- Sensitivity (2,83V/1m): 87dB
- Frequency response (+/-3dB): 65Hz-23kHz
- Low frequency point (-6dB): 55Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 6.7 Ohms
- Recommended amp power 20-120W
- Filtering frequencies 2,800Hz

- Type: Outdoor loudspeaker
- Speakers: Aluminum inverted dome tweeter6 1/2" waterproof woofer with Polyglass treatment
- Sensitivity (2,83V/1m): 87dB
- Frequency response (+/-3dB): 65Hz-23kHz
- Low frequency point (-6dB): 55Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 6.7 Ohms
- Recommended amp power 20-120W
- Filtering frequencies 2,800Hz

- Type: Outdoor loudspeaker
- Speakers: Aluminum inverted dome tweeter8" waterproof woofer with Polyglass treatment
- Sensitivity (2,83V/1m): 88dB
- Frequency response (+/-3dB): 60Hz-23kHz
- Low frequency point (-6dB): 45Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 6.7 Ohms
- Recommended amp power: 20-150W
- Filtering frequencies: 2,800Hz

- Type: Outdoor loudspeaker
- Speakers: Aluminum inverted dome tweeter8" waterproof woofer with Polyglass treatment
- Sensitivity (2,83V/1m): 88dB
- Frequency response (+/-3dB): 60Hz-23kHz
- Low frequency point (-6dB): 45Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 6.7 Ohms
- Recommended amp power: 20-150W
- Filtering frequencies: 2,800Hz

- Type: Passive subwoofer
- Speakers: 8" Polyglass Woofer
- Sensitivity (2.83V/1m): 89 dB
- Bandwith (+/-3dB): 34-140Hz
- Cut-off frequency (-6dB): 30Hz
- Nominal impedance: 8 Ohms
- Recommended amp power: Max 200W / 4 Ohms

- Type: Subwoofer amplifier
- Power (continuous): Max 200W, 150W continuous (4 Ohms)
- Minimum load: 4 Ohms
- Voltage range: 100-120V~60Hz / 220-230V~50Hz
- Power consumption: 150W
- Stand-by power consumption: 0.5W
- Bandwith: 20-250Hz
- Subsonic filter: 18dB/oct

- Type: 3-way in-ceiling
- Drivers: 2 x 5" Flax woofers, 4" Flax midrange, 1" Al/Mg inverted dome tweeter
- Sensitivity (2.83V/1m) 91dB
- Frequency response (+/-3dB): 55Hz - 28kHz
- Low frequency point (-6dB): 45Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 2.9 Ohms
- Recommended amplifier power: 50 - 150W

- Type: 2-Way
- Drivers: 4" Flax Mid-bass, 1" Al/Mg inverted dome Tweeter
- Sensitivity (2.83 V/1m): 88dB
- Frequençy response (+/-3dB): 80Hz - 28kHz
- Low frequençy point (-6dB): 72Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 4.5 Ohms
- Recommended amplifier power: 25 - 100W

- Type: 2-Way
- Drivers: 6 1/2" Flax Mid-bass, 1" Al/Mg inverted dome Tweeter\r
- Sensitivity (2.83 V/1m): 89dB
- Frequençy response (+/-3dB): 65Hz - 28kHz
- Low frequençy point (-6dB): 45Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 4.8 Ohms
- Recommended amplifier power: 25 - 130W

- Type: 2-Way
- Drivers: 8" Flax Mid-bass, 1" Al/Mg inverted dome Tweeter
- Sensitivity (2.83 V/1m): 90dB
- Frequençy response (+/-3dB): 48Hz - 28kHz
- Low frequençy point (-6dB): 35Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 4.5 Ohms
- Recommended amplifier power: 25 - 150W

- Type: 2-Way In-Wall
- Drivers: 6 1/2" Flax Cone Woofer, 1" Al/Mg inverted dome tweeter
- Sensitivity (2.83V/1m): 90dB
- Frequency response (+/-3dB): 55Hz - 28kHz
- Low frequency point (-6dB): 45Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 4.5 Ohms
- Recommended amplifier power: 25 - 130W

- Type: 3-Way In-Wall
- Drivers: 2 x 6 1/2" Woofers, 4" Flax Midrange, 1" Al/Mg inverted dome tweeter
- Sensitivity (2.83V/1m): 92dB
- Frequency response (+/-3dB): 40Hz - 28kHz
- Low frequency point (-6dB): 33Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 2.9 Ohms
- Recommended amplifier power: 50 - 150W

- Type of speaker: 2-Way in-wall/in-ceiling
- Speaker drivers: 6 1/2" "W" Midrange/Bass, 1" Pure Beryllium inverted dome tweeter
- Sensitivity (2.83V/3 feet - 1m): 89dB
- Bandwidth (+/-3dB): 55Hz - 40kHz
- Low-frequency cut-off (-6dB): 45Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 4.9 Ohms
- Recommended amp power: 25 - 150W

- Type of speaker: 2-way closed-back in-wall
- Speaker drivers: 6 1/2" Bass/Midrange, 1" Pure Beryllium inverted dome tweeter
- Sensitivity (2.83V/3 feet - 1m): 88dB
- Bandwidth (+/-3dB): 55Hz - 40kHz
- Low-frequency cut-off (-6dB): 45Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 7 Ohms
- Recommended amp power: 25 - 150W

- Type of speaker: 2-way coaxial in-ceiling
- Speaker drivers: 6 1/2" ‘W’ Midrange/Bass, 1" Pure Beryllium inverted dome tweeter
- Sensitivity (2.83V/3 feet - 1m): 90.5dB
- Bandwidth (+/-3dB): 55Hz - 40kHz
- Low-frequency cut-off (-6dB): 45Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 5.1 Ohms
- Recommended amp power: 25 - 150W

- Type of speaker: 3-way bass-reflex in-ceiling
- Speaker drivers: 2 x 5 1/8" ‘W’ cone Bass, 4" ‘W’ cone Midrange, 1" Beryllium inverted dome tweeter
- Sensitivity (2.83V/3 feet - 1m): 91dB
- Bandwidth (+/-3dB): 53Hz - 40kHz
- Low-frequency cut-off (-6dB): 43Hz
- Nominal impedance: 8 Ohms
- Minimal impedance: 2.9 Ohms
- Recommended amp power: 50 - 180W

- Type of speaker 3-way closed-back in-wall
- Drivers: 7 1/8" Passive radiator with ‘W’ cone, 6 1/2" Bass with ‘W’ cone, 3 1/8" Midrange with ‘W’ cone, 1" Pure Beryllium inverted dome tweeter
-Sensitivity (2.83V/3 feet - 1m): 91dB
- Bandwidth (+/-3dB): 48Hz - 40kHz
- Low-freq. cut-off (-6dB): 43Hz
- Nominal impedance: 8 Ohms
- Min. impedance: 2.9 Ohms
- Recommended amp power: 25 - 240 W

- Self-contained products designed to be assembled
- Simple assembly & connection
- Option to have a IWLCR Utopia & up to 6 IWSUB Utopia on the same channel
- Vertical & horizontal assemblies possible
- Professional Speakon cables supplied
-Specification tables provided according to assembly configurations

- Self-contained products designed to be assembled
- Simple assembly & and connection
- Option to have a IWLCR Utopia & up to 6 IWSUB Utopia on the same channel
- Vertical & horizontal assemblies possible
- Professional Speakon cables supplied
- Specification tables provided according to assembly configurations