• Bekafun
  • Audac VEXO110A/W - 10" HIGH PERFORMANCE 2-WAY ACTIVE LOUDSPEAKER WHITE

Audac VEXO110A/W - 10" HIGH PERFORMANCE 2-WAY ACTIVE LOUDSPEAKER WHITE

AUD-VEXO110A/W

- Speaker type: 2-way
- Max. Power: 1200 W
- RMS Power: 300 W
- Impedance: 8 Ω
- Sensitivity (1W/1m): 96 dB
- Sound Pressure (Max. W/1m): 121 dB
- Connectors: 3-Pin terminal block (linkthrough), XLR male (linkthrough)
- Inputs: USB port, RJ45 (Ethernet)
- Frequency Response (± 3 dB): 65 Hz - 20 kHz
- Dispersion: Horizontal 90°, Vertical 70°
- Crossover Type: Passive built-in
- Drivers: HF: Compression driver with 1.7" VC and 1" throat, LF 12" (2.5" VC)
- Connectors: Remote control RJ45, Input 2 x Combo XLR / 6.3 mm jack, 3-pin Euro Terminal Block (Pitch - 3.81 mm)
- Power Consumption: Standby 3.2 W, Idle 22.5 W


€ 1.324,10
prijzen incl. taksen en BTW

Tijdelijk niet op voorraad

The VEXO series are compact high performance 2-way active loudspeakers and come in 3 different models, each of them with different sizes and performances meeting the requirements of every application. The VEXO series loudspeakers consist of active and passive versions. The low-frequency transducer, which is made out of high-quality materials, is combined with a 1.7” voice coil compression driver, enabling high sound pressure levels and a tight driver response with a rotatable 90° x 70° coverage pattern for a wide range of applications.

Thanks to the unique driver composition, the VEXO112 delivers a clear and natural sound with an RMS power of 400 Watts and a maximum power of 1600 Watt. The frequency response (±3dB) starts from 58Hz up to 20 kHz and the sensitivity (1W/1m) reaches 99 dB while a maximum continuous sound pressure level from 125 dB can be achieved.

The construction of the cabinets is made of 12mm plywood with a polyurethane coating, making them resistant to any impact. The front side of the cabinet is finished with a powder-coated steel grill with acoustical foam. A recessed carry handle on the rear side makes carrying easy. Positioning and suspension of the speaker are easily achieved by using the standard 35 mm pole adapter on the bottom and the M10 rigging points. Two speaker connectors provide reliable connections with easy link-through to cabinets.

The optional Clever U bracket allows mounting the high power 2-way cabinet both horizontally and vertically. An inclination of -90° to +35° ensures an optimal positioning. The optional MBK bracket even allows mounting the VEXO series to the ceiling which gives the opportunity to install the loudspeaker cleanly in any environment.

By installing the optional ANI44XT Dante audio network interface in the active loudspeaker, the VEXO series can be integrated into any Dante enabled AV network and transfer digital audio with any compatible solution on the market.

The VEXO112A features the unique WaveDynamics innovation. Due to this DSP processor, the audio control and processing technology enable any user to effortless control the most advanced acoustic configurations. The integrated DSP allows pre-sets for full-range, satellite and custom configurations and can be loaded via the USB slot on the back of the device. By installing the optional ANI44XT Dante audio network interface in the loudspeaker, the VEXO series can be integrated into any Dante enabled AV network and transfer digital audio with any compatible solution on the market.

Naast de ingebouwde menger is er plaats voor een optionele Dante kaart. De ingebouwde DSP processor laat je toe deze kast volledig te configureren. De kast is ook stuurbaar via de Audac Touch Software.

  • Compatibel met AUDAC Touch
  • Dante-uitbreidingspoort
  • Geavanceerd DSP- en luidsprekerbeheer
  • DuraCoat structuurlak
  • Hoge geluidsdrukniveaus met strakke driverrespons
  • Compatibel met TouchLink
  • Ball impact resistance
  • Horizontale en verticale montage
  • Gebruiksvriendelijke montage
  • -90° tot +35° helling
  • WaveDynamics ondersteund

Datasheet(s)