- 4 channels with phono/line inputs
- VCF Filter system – low-pass, high-pass and band-pass filters plus frequency and resonance controls
- 3-band EQ
- External FX loop (Send/Return) system with dry/wet control per channel
- Mic input on balanced XLR, with 2-band EQ
- Balanced main mix out on XLR
- Independent booth out
- Record out
- 3.5mm and 1/4? headphone outputs

- 96kHz FPGA processing
- 48 Input Channels
- DEEP Processing ready
- 25 Faders / 6 Layers
- 12 Stereo mixes + LR
- 3 Stereo Matrix
- 8 Stereo FX Engines + dedicated returns
- 7" capacitive touchscreen
- SLink port for remote audio/expansion
- 64ch I/O Port for audio networking
- 32×32 USB audio interface
- SQ-Drive direct recording to USB
- AES output
- Chromatic channel metering

- 6 dual stereo channels - 4 phono/line, 2 mono/mic or stereo return
- 2 independent stereo mix outputs
- 2 aux sends for output to external FX units
- VCF system - 2 independent stereo filters with frequency and resonance controls
- 2 independent LFO’s for filter manipulation
- 4-band EQ total kill on HF and LF, wide Q for cut, narrow Q for boost
- Booth output on TRS jack

The Xone:92 Limited Edition celebrates 20 years of the iconic Xone:92, combining classic styling with modern refinements to deliver the best-ever version of the legendary analogue DJ mixer.

Analogue Mixer
6 + 2 Channels
Channel 1-4, 4-Band EQ
Channel A-B, 3-Band Parametric EQ
USB Soundcards Dual 24 Channel (12 in / 12 out)
2 x VCF Filter
HPF / BPF / LPF
Adjustable Frequency & Resonance
Assignable CH 1-4 + CH A-B
CRUNCH (Controlled Harmonic Signal Distortion)

- 96kHz FPGA processing
- 48 Input Channels
- DEEP Processing ready
- 17 Faders/6 Layers
- 12 Stereo mixes + LR
- 3 Stereo Matrix
- 8 Stereo FX Engines + dedicated returns
- 7" capacitive touchscreen
- SLink port for remote audio / expansion
- 64ch I/O Port for audio networking
- 32×32 USB audio interface
- SQ-Drive direct recording to USB
- AES output
- Chromatic channel metering

- 96kHz FPGA processing
- 48 Input Channels
- DEEP Processing ready
- 33 Faders / 6 Layers
- 12 Stereo mixes + LR
- 3 Stereo Matrix
- 8 Stereo FX Engines + dedicated returns
- 7" capacitive touchscreen
- SLink port for remote audio/expansion
- 64ch I/O Port for audio networking
- 32×32 USB audio interface
- SQ-Drive direct recording to USB
- AES output
- Chromatic channel metering

Low-noise, high-gain RIAA preamp.
3-band isolator EQ.
Warm pure analogue summing.
Matched Phono/Line inputs.
Classic Xone:VCF (Voltage Controlled Filter)
Mini InnoFADER crossfader.
Master insert / FX with switch.
Tactile illuminated switches with backlight.
Latching/non-latching Cue modes.
RGB chromatic channel meters.

Low-noise, high-gain RIAA preamp.
3-band isolator EQ.
Warm pure analogue summing.
Matched Phono/Line inputs.
Classic Xone:VCF (Voltage Controlled Filter)
Mini InnoFADER crossfader.
Master insert / FX with switch.
Tactile illuminated switches with backlight.
Latching/non-latching Cue modes.
RGB chromatic channel meters.
USB-C Audio/MIDI Interface:
96kHz, 24-bit, class-compliant operation (Mac, Windows, iOS)
3 modes: Stream / DVS Pro / DAW
MIDI Output from: Mini Innofader / Filter: HPF / LPF & Freq / Channel: Filter, Cue, Faders / Master Insert In
Dual-port powered USB hub

Xone:PX5 is a 4+1 channel mixer, equipped with the legendary Xone filter, 3 band EQ on all channels and an intuitive layout.

ZED16FX 10 mic/line inputs, 3 stereo sources USB, FX and Sonar X1 L.E.

- 2 Mic / Line Inputs with separate XLR and TRS jack socket
- 2 Stereo Inputs with TRS jack sockets
- 2 high impedance Guitar DI inputs, eliminating the need for DI boxes
- Lo-cut filter for cleaning up unwanted low frequency noise
- 2 band EQ for easy creative and corrective tonal shaping
- 60mm smooth travel fader on main mix

- 2 Mic / Line Inputs with separate XLR and TRS jack sockets
- 2 Stereo Inputs with TRS jack sockets
- 2 high impedance Guitar DI inputs, eliminating the need for DI boxes
- Lo-cut filter for cleaning up unwanted low frequency noise
- 2 band EQ for easy creative and corrective tonal shaping
- 60mm smooth travel fader on main mix
- Internal FX engine with tap tempo

- 2 Mic / Line Inputs with separate XLR and TRS jack sockets
- 2 Stereo Inputs with TRS jack sockets
- 2 high impedance Guitar DI inputs, eliminating the need for DI boxes
- Lo-cut filter for cleaning up unwanted low frequency noise
- 2 band EQ for easy creative and corrective tonal shaping
- 60mm smooth travel fader on main mix
- 2 in, 2 out USB Audio Interface (24-bit/96kHz)
- Cubase LE

CQ-12T Features:
* Inputs: 5 XLR - 5 XLR/TRS Combi - 2 TRS (stereo)
* Outputs: 2 XLR (Main) - 6 TRS (Monitors)
* 16×16 USB-B interface (48/96kHz)
* 16×16 SD record/playback (48/96kHz)
* Stereo USB record/playback with dedicated input channel
* Stereo Bluetooth playback with dedicated input channel
2 FX engines
* 3 Custom SoftKeys
* Dual Footswitch connection
* 7” Capacitive touchscreen with associated rotary control
* Assignable TRS headphone output

CQ-18T Features:
* Inputs: 8 XLR - 8 XLR/TRS Combi - 2 TRS (stereo)
* Outputs: 2 XLR (Main) - 6 TRS (Monitors)
* 24×22 USB-B interface (48/96kHz)
* SD record/playback: 24x22 (48kHz) - 16x16 (96kHz)
* Stereo USB record/playback with dedicated input channel
* Stereo Bluetooth playback with dedicated input channel
4 FX engines
* 3 Custom Rotaries
* 3 Custom SoftKeys
* Dual Footswitch connection
* 7” Capacitive touchscreen with associated rotary control
* 2 Assignable TRS headphone outputs
* Built-in dual band 2.4G/5G AC Wi-Fi with auto channel select

CQ-20B Features:
* Inputs: 8 XLR - 8 XLR/TRS Combi - 4 TRS (stereo)
* Outputs: 2 XLR (Main) - 6 XLR (Monitors) - Assignable Alt Out
* 24×24 USB-B interface (48/96kHz)
* SD record/playback: 24×24 (48kHz) - 16x16 (96kHz)
* Stereo USB record/playback with dedicated input channel
* Stereo Bluetooth playback with dedicated input channel
* 4 FX engines
* Dual Footswitch connection
* Assignable TRS headphone output
* Built-in dual band 2.4G/5G AC Wi-Fi with auto channel select

Rack Ears
Rack ear kits are available for installation of your CQ-18T into a standard 19″ rack.

- Dante input interface, 48kHz/96kHz
- 2x combi mic/line inputs
- Local gain control
- 48V phantom power with LED indicator
- PoE powered or DC 12V
- EtherCon connector
- Rugged aluminium box
- Optional ears for surface mounting (included in DT20-M version)
- Optional rack mounting kit DT-RK19
- AES67 compatible
- Dante Domain Manager ready

- Dante 2×2 interface, 48kHz/96kHz
- Phoenix euroblock connectors
- Local gain control and mic/line switch
- 48V phantom power
- PoE powered or DC 12V
- Rugged aluminium box
- Includes ears for surface mounting
- Optional rack mounting kit DT-RK19
- AES67 compatible
- Dante Domain Manager ready

- 8 Motorised faders
- 6x Layers
- PoE+ or external 12V PSU (supplied)
- Use freestanding or mount in a plinth, podium or furniture

SQ Waves provides any SQ or AHM with a 64×64, 96kHz or 48kHz interface to a Waves SoundGrid network using the I/O Port.

Qu-6 takes the ever-popular Qu-24 form factor and adds Allen & Heath’s powerful XCVI processing, new FX engines
and Everything I/O connectivity. There’s also a larger capacitive touchscreen, channel strip displays, customisable
layers and extra SoftKeys.
In addition, the Qu-6D variant features a built-in 16x16 48/96 kHz Dante port for interoperability with other Dante
enabled equipment.
Both the Qu-6 and Qu-6D are 32 input channel, 96kHz digital audio mixers, combining high performance audio
processing and professional features with ease of use and hands-on control.
The Qu-6 and Qu-6D are multi-purpose mixers suitable for live music/band use, AV and install, studio and broadcast.
Workflow and UI have been designed to make operation easy for inexperienced users or volunteers, provide
familiarity to those transitioning from analogue mixing and give quick access to more advanced features for the
experienced engineer.

Qu-7 takes the ever-popular Qu-32 form factor and adds Allen & Heath’s powerful XCVI processing, new FX engines
and Everything I/O connectivity. There’s also a larger capacitive touchscreen, channel strip displays, customisable
layers and extra SoftKeys.
In addition, the Qu-7D variant features a built-in 16x16 48/96 kHz Dante port for interoperability with other Dante
enabled equipment.
Both the Qu-7 and Qu-7D are 32 input channel, 96kHz digital audio mixers, combining high performance audio
processing and professional features with ease of use and hands-on control.
The Qu-7 and Qu-7D are multi-purpose mixers suitable for live music/band use, AV and install, studio and broadcast.
Workflow and UI have been designed to make operation easy for inexperienced users or volunteers, provide
familiarity to those transitioning from analogue mixing and give quick access to more advanced features for the
experienced engineer.

ZED60-10FX Optional Rack Mount Kit

- Fully customisable
- Intuitive operation
- Compact, smart design
- 40 sources from GLD, Qu, dLive or iLive
- Compatible with MADI, Dante, Waves SG or EtherSound via ME-U hub
- Daisy chain or use standard PoE Ethernet hubs
- 16 assignable keys to suit application

Remote AudioRack for GLD and Qu mixers: 24 Mic/Line, 12 XLR Out, dSNAKE Cat5

Penny & Giles Cross Fader Assembly For XONE2:62, 464, 92, 32

AB168 AudioRack for Qu & GLD mixers: 16 XLR Inputs, 8 XLR outputs, dSNAKE Cat5, Handle & Bumpers

SFP module for superMADI card, multimode fibre, 125 Mbit/s, LC connectors