The ProDJuser DDJ SZ is a professional flight case designed for Pioneer Flagship controller DDJ SZ, also suitable for DDJ-SZ 2 and DDJ RZ.
A sliding platform to hold a laptop (including velcro straps) is included in the design.
3 handles and 2 PENN ELCOM™ wheels enable you to transport your valuable DDJ-SZ with ease..



Check out these pro features:

Made from 9mm plywood with a hard protective black top-layer
Storage space for cables, hard-drives, a clean t-shirt etc.
Professional handles, butterfly-locks and wheels from PENN ELCOM™
Width 967mm, Height 209mm, Depth 543mm
Weight approx. 19Kg

NEW Case for Pioneer DJM-A9, Black

The DM 19 is a 19″ 10U Mixer/Controller flightcase

Made from 9mm plywood with a hard protective black top-layer
Professional handle from PENN ELCOM™
Width 543mm, Height 201mm, Depth 485mm
Weight approx 10Kg

Heavy Duty Professional 16HE 19? tunnel case

Made out 9mm Plywood and finished with a hard black top layer
Penn Elcom hardware (including blue wheels)
Butterfly locks (4 on each lid)
Comfortable recessed black side handles
Front rack profile punched, rear rail
Detachable wheel plate with 4 steerable wheels (2 w/lock)
Width 530mm, Height 750mm, Depth 508mm
Weight approx 29.5kg

FLI 2-12 RS is the heavy Duty Professional 2HE 19? tunnel case, with detachable front/rear lid!

Made out 6mm Plywood and finished with a hard black top layer
Penn Elcom hardware
Butterfly locks (2 on each cover)
Comfortable recessed side handle
Front rack profile punched, rear rail
Including 4 rubber feet
Width 530mm, Height 130mm, Depth 415mm
Weight just 7.5Kg

Heavy Duty Professional 2HE 19? tunnel case, with detachable front/rear lid!

Made out 9mm Plywood and finished with a hard black top layer
Penn Elcom hardware
Butterfly locks (2 on each cover)
Comfortable recessed side handles
Front rack profile punched, rear rail
Including 4 rubber feet
Width 530mm, Height 130mm, Depth 609mm
Weight appox 9kg

Heavy Duty Professional 2HE 19? tunnel case, with detachable front/rear lid!

Made out 9mm Plywood and finished with a hard black top layer
Penn Elcom hardware
Butterfly locks (2 on each cover)
Comfortable recessed side handles
Front rack profile punched, rear rail
Including 4 rubber feet
Width 530mm, Height 130mm, Depth 609mm
Weight appox

19" 6HE Tunnel Case, depth 45cm

Made from new birch and extra strong print
All handles and locks PENN ELCOM
Butterfly locks (2 on each cover)
Comfortable recessed side handles
Front rack profile punched, rear rail
Including 4 rubber feet
Width 530mm, Height 305mm, Depth 457mm
Weight appox 13kg

Productinfo
Stretch Black Fabric Skirt,
The perfect fit for the (foldable) DJ truss table.
Supplied with 6 clamps to connect the skirt to the table.

Productinfo
Stretch Black Fabric Skirt,
The perfect fit for the (foldable) DJ truss table.
Supplied with 6 clamps to connect the skirt to the table.

The ProDJuser Key 61 & Key 76 are new additions to our current Key 88. The design is new and therefor slightly different the the Key 88: more internal protection by use of Z-Foam; 4 professional hinges, Penn recessed wheels and more internal space for cables, music sheets etc. The Key 61 and 76 are extremely rigged, strong and developed for really on-the-road use. More important, the Z-Foam construction is designed for fitting a wide variety of keyboard brands and a list of which type and brands will fit is available at the download section on the right side of the page. But please do check the sizes of your keyboard – it might fit our keyboard case. Both Key 61 and 76 will fit most of the Roland, Yamaha (also Tyros series), Korg and Nord Lead keyboards. Last but not least: Two convenient handles on both ends will make lifting easy, while two recessed Penn wheels provide easy transporting options.

Check out these great pro features:

Made out 9mm Birch Plywood and finished with a hard black top layer
PENN ELCOM™ hardware
2 Butterfly Locks
4 Professional Hinges
Comfortable recessed side handles on both ends
2 Recessed Penn wheels + rubber feet, so the case can be stored vertically
Z-Foam easy adjustable to fit a wide range of keyboard brands and types
Storage space for cable etc.
Exterior sizes: Length 1225mm, Height 219mm, Depth 490mm
Interior sizes: Please check the Product Specs
See also the technical documentation for more detailed specs.

The ProDJuser Key 88 is a professional keyboard flightcase. It’s reliable, strong and developed for really on-the-road use. Despite the very attractive price, still a flight case with professional features and feel – and will give you years of road-worthy protection. Lifting it by yourself, depends on the brand keyboard, could be something to think-over twice. Two recessed wheels will make transporting surely easier and even somewhat convenient. But it still is a full size 88 key keyboard flightcase. If you believe it is too big, why not swapping your type of instrument for a flute or mandolin?

pro features:

Made out 9mm Plywood and finished with a hard black top layer
PENN ELCOM™ hardware
4 Butterfly Locks
Comfortable recessed side handles on both ends
2 Recessed wheels
Z-Foam easy adjustable to fit a wide range of keyboard brands and types
Storage space for cable
Exterior sizes: Length 1565mm, Height 204mm, Depth 456mm
Interior sizes: Length 1500mm, Height 190mm, Depth 410
See also the technical documentation for more detailed specs.

The MINI 105 is a two-way
loudspeaker system with one
5" woofer and 1" exit
compression driver coupled to
a round 140°×140°wide
dispersion horn.
Supplied with a Multi-angle
rigging bracke

The MINI 112B is
a single 12” lowfrequency
enclosure
designed for sub
bass
reinforcemen

The MINI 112B is
a single 12” lowfrequency
enclosure
designed for sub
bass
reinforcemen

Prodjuser Monkey Tool is very helpful tool
It can open your beer or fasten a nut and fits nicely on your keychain.

NEW Case for Pioneer OPUS QUAD, Black

The PHASE 1 is an advanced measuring instrument to test the phase of any electronic audio system. Battery powered and due to its small size and weight it is a “must have” for every toolbox of every sound engineer. The system consists of two hand-held units. The emitter (PHASE 1A) generates a broad band 1Hz pulse as an output signal, this signal is then fed (via the signal chain) to the receiver (PHASE 1B). The signal can be sent to the receiver both electrically and acoustically. This is done electrically via the XLR connectors on the units and acoustically the emitter will send the signal through the speaker to the built-in microphone in the receiver.

The ProDJuser Powered Mixer Case is specifically designed for several Powered Mixers, like Phonic (PowerPod 1860) and Behringer’s PMH-3000. A professional case with professional features and parts.

Check out these great pro features:

Made out 9mm Birch Plywood and finished with a hard black top layer
PENN ELCOM™ hardware
Butterfly Locks
Comfortable recessed handles
Stackable
Exterior sizes: Width 568mm, Height 207mm, Depth 595mm
Weight approx 11kg

Productinfo
19 inch Rack Light with 2x 30 cm Gooseneck, Dimmer / On-Off Switch and White LED.

Comes complete with adapter.

Slant 11-2 RS is the perfect flightcase to hold a 19? mixer and/or controller on top and 19? rack equipment on the frontside.
Professional black handles and butterfly-locks from PENN ELCOM™
Heavy duty hardware and ball corners
Sliding rack rail on the top, punched rackrail on the front
Hinged door with PENN ELCOM™ butterfly lock on the rear
Width 536mmmm, Height 331.5 mm, Depth 620mm
16.3Kg

Professional solution to transport your valuable 19? mixer and rack-equipment.
Made from 9mm plywood with a hard protective black top-layer
Professional black handles and butterfly-locks
Sliding rack rail on the top, punched rackrail on the front
Width 542mm, Height 1043mm/Total 1153mm(with wheels), Depth 670mm
Weight approx 36Kg

Set of 2 19inch cases, bottom 10U, top 9U and 12U tilt-able mixerrack, incl. wheels
100mm durable Blue Wheels (2 w/brake)
Top case: Width 542mm, Total Height 512mm incl lit/442mm without, Depth 670mm (with lit)
Bottom case: Width 542mm, Total Height 484 (without wheels), Depth 670mm (with lit)
Weight: approx. bottom 21Kg, top 18Kg

Professional Flightcase designed for The Allen & Heath SQ5 Digital Mixer
Including a stylish doghouse, hiding all cabling and connectors.. 9mm plywood with a black protective top layer
Incuding doghouse that opens from the top and back for easy access
Penn Elcom™ recessed black handles and butterfly-locks
Exterior sizes: Length 532mm, Height 254mm, Depth 729mm
Weight approx 17.2kg

Stand Case MK2 RS, developed for its weight – but still able to holds approximately 12-16 mic stands, depending on type, size and weight. Made out 9mm Plywood and finished with a hard black top layer
PENN ELCOM™ hardware
Butterfly locks
Comfortable recessed side handles on both ends
Hinged Lit (fixed)
Exterior sizes: Length 1204mm, Height 316mm, Depth 310mm
Weight approx 14.5Kg

Professional flightcase for Yamaha TF1, with a little modification fit for BENQ LU9915 projector. - Made of 9 mm new wood
All handles and locks are PENN ELCOM
Exterior dimension(LxMxH): 790 X 610 X 370
Weight appox 17kg

Wheels - wielplaat - Made out 18mm Birch Plywood and finished with a black paint
Very durable 100mm Blue Wheels, 2 w/brake
Comfortable pre-manufactured handgrip
4 Pre-drilled wholes for fixing a flight case
Width 526mm, Depth 559mm

The ProDJuser XDJ R1 is a professional flight case for both Pioneer XDJ R1 and XDJ-Aero models.
Specifically designed for on-the-road use but still compact enough to put in your car or even take it on the train (weight is only 13Kg). Despite the price a professional case for professional products and use.
A sliding platform to hold a laptop (including velcro straps) is included in the design

Check out these pro features:

Made from 9mm plywood with a hard protective black top-layer
Storage space for cables, hard-drives, a clean t-shirt etc.
Professional handle and butterfly-locks from PENN ELCOM™
4 Rubber feet
Width 723mm, Height 209mm, Depth 452mm
Weight approx.13Kg

Professional Black Flightcase designed for Pioneer’s XDJ RR.

9mm plywood with a black protective top layer
Penn Elcom™ recessed black handle, wheels and butterfly-locks
Exterior sizes: Length 689mm, Height 150mm, Depth 484mm
Weight approx 10.8kg