Filters

Specifications

Dimensions: 480 x 385 x 132 mm (LxWxH)

-External Dimensions: 340x310x152mm
-Internal Dimensions: 314x243x124mm
-Lid Depth: 26mm
-Bottom Depth: 98mm
-Material:TSU-1 Resin
-Weight: 2.26Kg
-Waterproof IP 67

Nichiban NT1200 is een standaard tape. De tape kan gemakkelijk verwijderd worden en laat bijna geen lijmresten achter. Dit type tape is geschikt voor tijdelijk gebruik.

Nichiban NT1200 is een standaard tape. De tape kan gemakkelijk verwijderd worden en laat bijna geen lijmresten achter. Dit type tape is geschikt voor tijdelijk gebruik.

The MS 4322 is a premium microphone stand which features heavy-duty construction, powder coating and a maximum height of 169 cm. The extremely stable base features a zinc die-cast bell and generously proportioned, precision-folding steel legs with durable rubber caps to protect surfaces. The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick-re

The SP 5212 B is a classic tripod speaker stand made from thick walled, yet lightweight powder coated steel tubing with a load capacity of 50 kg and 195 cm maximum height.The die cast aluminium leg collar has been completely redesigned to provide superior durability and longevity, the height adjustment collar is made of steel for additional strength and is virtually indestructable. It features a

Classic one-piece boom arm with 3/8" thread, and sliding adjustment through non-scratching swivel joint. Easy tightening with T-bar locking screw. Complete with locking washer and plastic handgrip. - Weight: 0.7 kg, BL: 800 mm.

Steel tube combination to connect satellite systems. With bottom M20 thread to attach connector plate 24116. Zero backlash and absolute vertical position. Height adjustment with spring-loaded locking screw and safety bolt. - Weight: 2.5 kg, H: 905/1450 mm.

- 11 Unit slanted rack on top
- 16 Unit vertical rack on front
- removeable heavy duty cover on front side
- front cover doubles as attachable table with fold-out support
- hinged door on back side
- outer dimensions: 545 x 656 x 1132mm
- inner dimensions: 465 x 511 x 811 mm
- handles on left and right side (2 total)
- butterfly catches on left and right side (6 total)
- wheels w brakes

- Accommodates all 12" mixers from 25,4 cm to 32,2 cm (wide) X 42,0 cm (high)
- outer dimensions: 382 x 482 x 226 mm
- inner dimensions: 322 x 420 x 80 mm
- handle on right side
- butterfly catch on front side with take-apart hinges on te back
- lined with foam for a tight fit for any 12" mixer up to 32,2cm wide including pioneer DJM600/DJM500

- 2 Unit deluxe rack system
- 2 removeable heavy duty covers (front and back)
- dual rack rails (front and back)
- outer dimensions: 536 x 151 x 384mm
- handles on front side (1 total)
- butterfly catches on left and right side (4 total)
- 20cm net depth

- 2 Unit deluxe rack system (industrial grade)
- 2 removeable heavy duty covers (front and back)
- dual rack rails (front and back)
- outer dimensions: 545 x 534 x 137 mm
- handle on front lid
- butterfly catches on left and right side (4 total)

- 3 Unit deluxe rack system
- 2 removeable heavy duty covers (front and back)
- dual rack rails (front and back)
- outer dimensions: 536 x 196 x 384mm
- handles on front side (1 total)
- butterfly catches on left and right side (4 total)
- 20cm net depth

- 3 Unit deluxe rack system for amplifiers (industrial grade)
- 2 removeable heavy duty covers (front and back)
- dual rack rails (front and back)
- outer dimensions: 545 x 185 x 637 mm
- handle on front side (1 total)
- butterfly catches on left and right side (4 total)

- 5 Unit deluxe rack system for amplifiers (industrial grade)
- 2 removeable heavy duty covers (front and back)
- dual rack rails (front and back)
- handles on left and right side (2 total)
- butterfly catches on left and right side (4 total)

- 6 Unit deluxe rack system
- 2 removeable heavy duty covers (front and back)
- dual rack rails (front and back)
- outer dimensions: 536 x 329 x 384mm
- handles on front side (1 total)
- butterfly catches on left and right side (4 total)
- 20cm net depth

- Case for Pioneer controller ddj1000 with laptop tray
- 837x519x242mm (outer dimensions)
- 712x470mm inner dimensions. Inner height base : 170mm Inner height cover: 90mm
- 2 butterfly catches on front, 1 left side, 1 right side.
- Carry handle on back, left and right side

- Case for Pioneer controller ddj800 and ddj1000l and Ddj-flx6 with laptop tray
- 837x519x242mm (outer dimensions)
- 712x470mm inner dimensions. Inner height base : 170mm Inner height cover: 90mm
- 2 butterfly catches on front, 1 left side, 1 right side.
- Carry handle on back, left and right side

- outer dimensions: 400 x 537 x 216 mm
- handle on left side
- butterfly catch on right side (1 total) with take-apart hinges on te left
- lined with adjustable, modular foam for tight fit
- fits Pioneer DJM900NXS2

- outside dimensions: 618 x 455 x 242 mm
- inner dimensions: 558 x 420 x 174 mm
- Pick & Fit foam for custom fitting of your gear
- lid lined with egg foam
- handle on the front
- butterfly catches on the front side (2 total) with take-apart hinges on the back
- Fits: Vestax VCM600 controller

- utility case with dimensions suited for european pallets
- 2x butterfly catches on the front
- handles on left, right & front side
- hinges on the back
- outer dimensions: 582 x 377 x 318 mm
- inside dimensions: 550 x 345 x 260 mm

- outer dimensions: 468 x 308 x 236 mm
- fits 1x Pioneer xdj-700
- handle on the left side
- butterfly on right side, hinges on the left
- equipment in picture not included

19" Rack Tray extra deep for mounting non standard equipment with a depth of up to 375 mmRear edge is folded up 10 mm for extra stability Internal width: 435mm Ventilation slots in sides -

The PR206 is a professional 19" metal rack compliant to ANSI/EIA RS-310D, DIN41491, IEC 60297 standards. The rack comes in a flat pack as DIY kit. It is a solid construction with a 1.5 mm thick cold rolled, steel frame and plates, finished with a black (RAL9004) fine structured powder coating.

The PR209 is a professional 19" metal rack compliant to ANSI/EIA RS-310D, DIN41491, IEC 60297 standards. The rack comes in a flat pack as DIY kit. It is a solid construction with a 1.5 mm thick cold rolled steel frame and plates, finished with a black (RAL9004) fine structured powder coating.

The PR218 is a professional 19" metal rack compliant to ANSI/EIA RS-310D, DIN41491, IEC 60297 standards. The rack comes in a flat pack as DIY kit. It is a solid construction with a 1.5 mm thick cold rolled steel frame and plates, finished with a black (RAL9004) fine structured powder coating.

The SPR612 is a professional 19" rack compliant to the ANSI/EIA RS-310D, DIN41491 and IEC60297 standards. A cold rolled steel 2 mm thick frame and 1,2 mm thick plates provides a solid and stable construction making it suitable for heavy equipment, storing up to 12 units inside. The SPR612 comes fully assembled including 50 mm wheels for easy moving and adjustable feet for fixing and leveling once

The SPR627 is a professional 19" rack compliant to the ANSI/EIA RS-310D, DIN41491 and IEC60297 standards. A cold rolled steel 2 mm thick frame and 1,2 mm thick plates provides a solid and stable construction making it suitable for heavy equipment, storing up to 27 units inside. The SPR627 comes fully assembled including 50 mm wheels for easy moving and adjustable feet for fixing and leveling once

Specifications

Dimensions: 560 x 460 x 1750 mm (LxWxH)
Weight: 37 kg