-Output Power, 8 Ohms: 2 x 140 W RMS /Ch
-Output Power, 4 Ohms: 2 x 200 W RMS /Ch
-Output Power, 2 Ohms: 2 x 100 W RMS /Ch
-Output Power, 16 Ohms: 2 x 80 W RMS /Ch
-Bridged Output Power, 16 Ohms: 280 W RMS mono
-Bridged Output Power, 8 Ohms: 400 W RMS mono
-Bridged Output Power, 4 Ohms: 200 W RMS mono
-Bridged Output Power, 70V line: 280 W RMS 70Vline

-Bridged Output Power, 8 Ohms: 260 W RMS mono
-CMRR: > 60dB (typical @1kHz)
-Frequency Response: 10Hz to 40kHz, +/- .5dB
-Total Harmonic Distortion: <0.05% (typical)
-Hum and Noise: > 100dB below clipping
-Input Impedance: XLR: 44k Ohms (bal), 1/4in: 22k Ohms (unbal)
-Input Sensitivity: 1V for Full Power Output into 8 Ohms

-Bridged Output Power, 16 Ohms: 2 x 200W/Channel RMS
-Bridged Output Power, 8 Ohms: 2 x 280W/Channel RMS
-CMRR: > 60dB (typical @1kHz)
-Damping Factor: > 100
-Frequency Response: 10Hz to 40kHz, +/- 0.5dB
-Total Harmonic Distortion: <0.05% (typical)
-Hum and Noise: > 100dB below clipping
-Input Impedance: 44k Ohms (balanced) / 22k Ohms (unbalanced)

Err:509

-Allows for 2×3, 2×2 +sub, 1×4, 1×5 or 1×6 Configurations
-Auto-Feedback Suppression
-Integrated Graphics Display
-Individual LED Meter and Mute on every Input and Output
-Ground Lift Switch
-Auto-Setup
-Setup Software and Updates Delivered via USB
-System Muting on Power On/Off
-Universal power supply

-Circuit Breaker: 15 Amp; Front Location
-Construction: All-Steel Chassis
-Filtering: EMI & RFI
-Light Pipes: 2 Front Pull-Out, Shock Mounted
-Power Capacity: 1800 W
-Power Outlets: Eight Rear Outlets
-Power Switch: Front Location - On/Off
-Power Switch Illumination: Yes - In "On" Position
-Protection Circuit: Surge & Spike Protection
-Voltage Metering: Linear Metered

-APF - Advanced Power Filtering
-Easy to read LED Input Voltage Metering
-Surge & Spike Protection
-8 Rear Outlets with Power Adapter Friendly Positioning
-Rear Mounted Gooseneck Light Source
-Pull Out Light Pipes with AutoOff and Dimmer
-Power Capacity of 1800 Watts
-EMI & RFI Filtering
-One Front-mounted Unswitched Power Outlet

-Frequency Response: 20Hz to 150kHz +/- 0.2 @ 0dBu
-Total Harmonic Distortion: <0.0007% from 20Hz to 20kHz at 0dBu input
-Typical Driving Source Dist.: 150 Ohms
-Phase Shift: <10 degrees @ 20 to 150kHz (reference 1kHz)
-Typical Output Load Impedance: 1k Ohms
-Dimensions: 1.85" H x 4.6" W x 3.5" D (47mm x 117mm x 89mm

-Frequency Response: 20Hz - 20kHz, +/-1dB
-Total Harmonic Distortion: <0.005% @ 1kHz (typical)
-Phase Shift: <10 degrees @ 20kHz
-Input Impedance: 25k -100k Ohms
-Ouput Impedance: 1k - 4k Ohms
-Insertion Loss: 12dB (typical)
-Connectors: 1/4-inch TRS stereo
-Maximum Attenuation: > 90dB (typical)
-Channel Isolation: > 90dB (typical)
-Power Requirements: Fully Passive

-Frequency Response: 10Hz -50kHz, +/-.5dB @ +4dBu
-Phase Shift Phase Error: Less than 5&186;, 20Hz - 20kHz
-CMRR 60dB typical
-Power Requirement Completely Passive
-Dimensions: 1.75"H x 19"W x 3.75"D
-Weight: 3.75 lbs

USB recording for any electrified musical instrument High quality 16-bit, 44.1 kHz or 48 kHz digital audio interface Shielded cable with 1/4? TS plug
LED indicator flashes during signal transmission
Plug and play with Windows and Mac OS

-CMRR: > -90dB (typical)
-Connectors: 1/4-inch TRS Balanced Phone Jacks
-Isolation: > -80dB (typical)
-Dimensions: 1.85"H x 4.6"W x 3.9"D (47mm x 117mm x 99mm)
-Weight: 0.84 lbs (0.38 kg)

-Variable Input Impedance
-LED Input Meter with Analog Output Meter
-Automatically switches between instrument and microphone preamp
-Enhanced OPL Output Protection Limiter
-Improved V3 Variable Valve Voicing Presets
-Enhanced ART Tube Technology Adds Warmth
-Wide Frequency Response (5hz/50kHz)

-Input Transformer blocks R.F. and other noise
-Custom Output Transformer reduces ground noise and maintains level for Balance/Unbalanced connections
-Low noise, low THD discrete audio path
-High impedance direct coupled low noise Instrument input
-Variable input impedance on the XLR input
-Rotary switches allow for reliable, repeatable results
-Gain trim function for precise adjustm

-Low noise, low THD discrete transistor audio path for incredibly detailed sound
-Unique servo controlled FET gain reduction circuit
-Rotary Slope switches provide reliable, repeatable results
-De-esser reduces sibilance when compressing vocals
-Detector loop with separate input and output jacks allows contoured compression
-10-segment peak sensitive Level meter can monitor either the

-Tube Driven 5ch Stereo USB Mixer
-2 Wide Dynamic Range Low Noise Mic Preamp Channels
-Dedicated High Impedance Instr. Input with Amp Simulator
-Integrated selectable 12AX7 Tube
-Switchable Low Noise +48V Phantom Power
-Precise VU Meters and Wide Range LED Meters with Selectable Source
-Flexible Control Room / Monitor Section
-USB 2.0 compliant. No drivers (Windows, Mac OS, Linux)

-Frequency Response: 30 Hz - 60 kHz +/- 1 dB balanced output, 20 Hz - 60 kHz +/- 1dB 1/4? output
-Total Harmonic Distortion: <0.1% @ max gain
-CMMR: > 60 dB @ max gain
-Equivalent Input Noise: -128dBu typical ("A" wtd., Shorted XLR balanced input, gain @ max)
-Input Impedance: 1M Ohms 1/4? input, 5K Ohms XLR input

-Frequency Response: 10Hz to 40kHz, +/-1 dB (typical)
-Total Harmonic Distortion: <0.05% (typical)
-CMRR: > 60dB (typical)
-Dynamic Range: > 100dB (20Hz to 20kHz)
-Equivalent Input Noise: <-130dB (XLR to XLR A-weighted)
-Input Impedance: Switchable, 4.7k Ohms / 600 Ohms (XLR)

-Frequency Response: 5Hz to 50kHz (+0 to -1dB)
-Total Harmonic Distortion: <.01% (clean); 0.1% (warm)
-CMMR: > 75dB (typ. @ 1kHz)
-Dynamic Range: <100dB
-Equivalent Input Noise: -129dBu (A weighted, xlr to xlr)
-Maximum Gain: 80dB (xlr to xlr); 74dB (1/4? to xlr)
-Maximum Input Level: +19dBu (xlr); +22dBu (1/4?)
-Maximum Output Level: +28dBu (xlr); +22dBu (1/4?)
-Phantom Power: +48 volts

-USB Interface Output
-Up to 70dB of Clean, "Musical" Gain
-Fast FET Limiter to Prevent Overload
-Precision LED Metering
-Compact, Stackable all Aluminum Chassis
-Phase Invert Switch
-Variable Input and Output Controls
-Compatible with Mac OS 9.1 and newer
-Extremely Low Noise Discrete Front End
-High Output Signal Drive Capability
-Switch Selectable Input Impedance

-Input Connections USB 2.0
-Output Connections Balanced XLR and 1/8” Headphone output
-Max output level +7.5dBu. Balanced line.
-Headphone output 150mW/ channel max.
-Frequency Response 20Hz to 20KHz +/- 1dB
-THD <0.020% (typical)
-Dynamic Range 96 dB typ. "A" wtd.
-Supported Sample rates 32kHz, 44.1kHz, 48kHz
-Dimensions 1.87"H x 4.61"W x 4.27"D (47.5mm x 117mm x 108mm)

-Frequency Response: 20 Hz - 20 kHz (+0, -1 dB)
-Total Harmonic Distortion: <0.01% @ 1 kHz
-Maximum Input Level: +4dBu (XLR input), +14dBu (1/4? input)
-Maximum Output Level: +14dBu (Main Mix Outputs), +13dBu (Monitor output)
-Input Connections: XLR balanced / 1/4? unbalanced "Combo" jack (ch1 input); 1/4? balanced or unbalanced (Ch2-Ch3 inputs)

-High Performance Low Noise Design
-Switchable +48v Phantom Power (CH1 & CH2)
-Assignable USB Record Source
-Independent Level Controls for Main and Headphone/Monitor Outputs
-1/8th-inch Headset Connectors (Mono Mic In and Stereo Headset Out)
-Integrated Class Compliant Plug-and-Play USB Audio for Mac & PC
-Operates on USB Power or 5VDC External Power Supply (Included)

-High Performance Low Noise Design
-Six Discrete Inputs (2 x Mic / 2 x Stereo Line Level)
-Switchable +48v Phantom Power (CH1 & CH2)
-High and Low EQ on Each Input Channel
-Integrated Stereo Multi-FX with Adjustable Sends & Returns
-Stereo LED Metering
-Independent Level Controls for Main and Headphone/Monitor Outputs
-Integrated Class Compliant Plug-and-Play USB Audio for Mac & PC

-Equivalent Input Noise: -102dBu (‘A’ weighted)
-Input Impedance: 10K Ohms
-Output Impedance: 100 Ohms
-Inputs Level: +20dBu
-Output Level: +20dBu
-Output Gain: +20dB max
-Frequency Response: 20Hz to 100KHz (+/- 0.5dB)
-Dynamic Range: >120dB (20-20KHz)
-Attack Time: 0.25msec. to 50msec. variable
-Release Time: 150msec. to 3 sec, variable
-Slope: Variable: 2:1 to 20:1

-Attack Time: 250 uSec. to 100 mSec
-Boost and Cut/Frequency Band: +12 dB on each band
-Compression Ratio: 1:1 to 20:1
-Equivalent Input Noise: -130 dBu, t shorted, Max gain, A weighted
-Frequency Response: 12 Hz to 100 KHz +0, -1 dB
-Maximum Gain: 0 dB to +60 dB
-Total Harmonic Distortion: <.033% typical

USB recording for any dynamic microphone
High quality 16-bit, 44.1 kHz or 48 kHz digital audio interface
Shielded cable with female XLR connector
LED indicator flashes during signal transmission
Plug and play with Windows and Mac OS

-Frequency Response: 10Hz -100kHz, +/-.5dB @ +0dBu
-Total Harmonic Distortion: <.05% Typical
-Dynamic Range: >100dB typical
-Maximum Input Level: 4/+24/+44dBu
-Maximum Output Level: +6dBu (battery powered), +14dBu (phantom powered)
-Input Connections: ¼-inch TRS and XLR female unbalanced, 470k Ohms
-Output Connections: XLR male balanced, <600 Ohms
-Output Phase: Switchable, Normal/Invert

-CMRR: > -95 dB (typical)
-Connectors: Balanced XLR
-Isolation: > -95 dB (typical)
-Dimensions: 1.85?H x 4.6"W x 3.9"D (47mm x 117mm x 99mm)
-Weight: 0.84 lbs (0.38 kg)

-Frequency Response: 10Hz -50kHz, +/-.5dB @ +4dBu
-Total Harmonic Distortion: .01% Typical @ 1kHz, +18dBu, <.05% @ 100Hz, +18dBu
-Input Connections: ¼ - inch TRS unbalanced, 50k Ohms
-Output Connections: XLR male balanced, 600 Ohms
-Output Phase:Switchable, Normal/Invert
-Ground Lift:Switchable, fully isolates inputs from chassis and output
-Input Attenuation:Switchable, (0dB, -20dB, -40dB)