Main Output Connections XLR (2) main output, transformer
coupled, switchable ground.
Main Output Impedance 300 Ohms.
Maximum Output Level 30 dBu balanced Main output,
0 dBu Headphone output.
Signal to Noise Ratio -90dB unweighted typical.
THD <0.05% typical
Bluetooth Version 5.0, up to 50m, Class 2
device (BDR/EDR)
Supported Audio CODEC’s SBC, AAC
Power Requirements 5V USB (80ma) or +48V
Phantom power w/both XLR’s
connected.
Dimensions (HxWxD 1.6-inch x 5.0-inch x 5.5-inch
(36 x 126 x 140 mm)
Weight 2.0 lbs. / 0.91 kg

- Input Connections: Locking 1/4"/XLR combo jack
- Input Impedance: 5K Ohms
- Max Input level: +6.6dBu
- Output Connections: 3.5mm Jack (1/8”)
- Gain: +9dB
- THD: ≤ .02% @1kHz typ.
- Max Output: 105mW @ 0.1% THD
- Typical run time: 40 hrs. (Alkaline batteries)
- Power Requirements: 2-AA batteries Included

- Bluetooth 5.0 receiver
- Three balanced XLR inputs with separate Mic/Line switch, Level control and Clip Indicator
- Three pairs of RCA stereo inputs with separate Level controls
- Selectable 15 Volt Phantom power for each Mic channel
- Balanced 1/4" TRS Main outputs with Master Level control
- Versatile Bass and Treble equalization on Main outputs
- Front TRS stereo 1/8-inch Input jack
- Stereo Record Out RCA jacks
- Effects Loop with Effects Level control and In/Out switch
- 14" Effects Send with stereo Returns
- Internal power supply
- Solid metal case

Weight 1.0 kg
Dimensions 12.0 x 11.0 x 5.0 cm

Input Impedance Microphone: 3.5k Ω
Line (CH1, CH2, CH3/4), 10k Ω
CH5 (Inst.), 1M Ω
Output Impedance Main, Control Room (Balanced/Unbalanced), 150/100 Ω
AUX Outputs, 150 Ω
Headphones, 100 Ω
Frequency Response 20-100kHz + 1dB
Maximum Input Level CH1, CH2 (Mic), +9dBu
CH1 CH2 (Line In), +20dBu
CH3/4 (EQ Flat), +20dBu
CH5 (EQ Flat), +16dBu
AUX Return, +24dBu
Maximum Output Level Main, Control Room (Balanced, Unbalanced), +20dBu/+17dBu
Aux Send, +20dBu
Headphones, 100mW / Ch @ 300 Ω, 50mW /Ch @32 Ω
Maximum Gain LINE IN to Main output (balanced), +63dB
CH 5 to Main output (balanced), 56dB
CH3/4 to Main output (balanced), +30dB
Equivalent Input Noise Microphone (@max gain), 127dBu “C”wtd.
Line (@max gain), -105dBu “C” wtd.
Instrument (@ max gain), -112dBu “C” wtd.
USB Computer Interface USB class compliant plug-and-play Mac and PC interface
A/D, D/A 16 Bit, 44.1 kHz or 48 kHz, USB selectable from computer
Phantom Power Switch selectable, +48V DC, filtered, current limited
Power Requirements 18 VAC, 1000mA
Dimensions 3.3″H x 7.8″W x 10.4″D (84mm x 198mm x 265mm)
Weight 5.5 lbs (2.5 kg)
Note 0 dBu = 0.775Vrms

- Freq. Response: 10Hz to 20kHz (+0,-1dB)
- Total Harmonic Distortion: <0.1% (typical)
- CMMR: > 75dB (typ @1kHz)
- Dynamic Range: > 100dB (20Hz to 20kHz)
- Equivalent Input Noise: -129dBu (‘A’ weighted XLR to XLR)
- Input Impedance: 2k Ω (XLR), 840K Ω (1/4″)
- Max. Gain: 70dB (XLR to XLR typical)
- Max. Input Level: +14dBu (XLR), +22dBu (1/4″)
- Max. Output Level: +28dBu (XLR), +22dBu (1/4″)
- Output Impedance: 600 Ω (XLR), 300 Ω (1/4″)
- Power Requirements: 9 VAC @ 700ma (typ)