Filter

- 60W rms @ 100 volt or 4 Ohm
- intuitive user interface
- ground breaking, logic and sheer rear panel
- prominent, illuminated, bigger Volume control
- compact 9.5" housing
- 1 mic/line input and 2 stereo line, mono summed inputs
- smart left-to-right 4 level priority and rear panel design
- emergency input
- paging mic with chime
- 24VDC override output

Type : 2-way HiFi Pro, bass reflex
- Cabinet : MDF Wood
- Woofer : 8i
- Tweeter : 1i
- Impedance : 8Ohm
- RMS Power 8ohm
- AES : 200W
- Music: 300W
- Protection : Auto-Reset
- SPL 1W: 93dB
- SPL Max: 124dB
- Freq. range : 60 Hz-20 kHz
- Connector : Speakon / Speakon
- IP40
- Mounting points Back : 2, Top/Bottom : 1/1, Left/Right : 2/2
- HxWxD : 411 x 250 x 250 mm
- Weight : 8.1 Kg

-RMS power output : 240 W RMS
-Power output terminal
-24 V DC Input terminal
-Operates under 4/8 Ohms / 70 V / 100 V
-High pass filter
-XLR balanced in and output
-Ground lift power switch
-2U high, 19" Rackmountable

- 4 x 480W output power @ 100V
- Lightweight Class-D amplifier
- Advanced DSP & loudspeaker management
- Intuitive graphical interface on 2.5" LCD display
- Pre-loadable loudspeaker & set configurations
- Unmatched technology and affordability
- Flexible input and output configuration
- XLR & terminal block source compatibility
- RS-232 control and Dante expansion port

-4 mic/line inputs via XLR/6.35mm jack (TRS)
-4 stereo inputs via RCA or mono via 6.35mm jack
-4 link out outputs per zone via Phoenix plug
-4 x 120W outputs at 100V via Phoenix plug
-Priority microphone on input 1
-Phantom power supply on inputs 1 to 4 Gain and tone settings (3 bands) on channels 1 to 4
-Gain settings on all inputs Tone settings (2 bands) per zone

- 4 x 240W output power @ 100V
- Lightweight Class-D amplifier
- Advanced DSP & loudspeaker management
- Intuitive graphical interface on 2.5" LCD display
- Pre-loadable loudspeaker & set configurations
- Unmatched technology and affordability
- Flexible input and output configuration
- XLR & terminal block source compatibility
- RS-232 control and Dante expansion port

QUICK-FIT 2-WAY 6.5" CEILING SPEAKER WITH TWIST-FIX GRILL 24W/100V & 8 OHM - WHITE
- Max. Power: 60W, RMS Power: 30W
- Sensitivity (1W/1m): 88dB
- Impedance: 8 ?
- Sound Pressure (Max. W/1m) 100V: 103 dB
- Freq: Response (± 3 dB) 55 Hz - 20 kHz
Range (-10 dB) 45 Hz - 20 kHz
- Line Transformer Tappings: 1: 24W - 417?
- Cut-out measurement: 200mm (Ø)
- Dim: 224 mm (Ø)
- Weight: 1,45kg

De Aerobix is voorzien van:
2 microphone ingangen met op de achterkant individueel instelbare "auto talk-over"
Individuele volume controls.
Met schroevendraaier instelbare gezamenlijke bas en treble control.
Aansluitingen 2x 6.3mm Jack op de voorkant, 2x XLR 3 op de achterkant.
2 stereo RCA(tulp) lijn ingangen
Music mute schakelaar op de voorkant.

-Frequency: 2.5 kHz
-Type: Passive built-in
-HF: 1"
-LF: 5"
-Range (-10 dB): 55 Hz - 20 kHz
-Response (± 3 dB): 70 Hz - 18 kHz
-Impedance: 8 Ohms/ 8Ohms
-Line Transformer Tappings: 1: 40 W/ 250 Ohms; 2: 20 W/ 500 Ohms; 3: 10 W / 1000 Ohms
-IP40
-Max. Power: 100 W
-Sensitivity (1W/1m): 87 dB

-outside diameter: 258 mm
-depth: 157 mm
-cutout: 232 mm
-installation grip range: 3 - 65 mm
-woofer size: 6.5 inch
-tweeter size: 1 inch
-transformer power taps
-100V: 60 - 30 - 15 - 7.5 W
-70V: 60 - 30 - 15 - 7.5 - 3.75 W
-low impedance dynamic power: 120 W
-low impedance RMS power: 60 W
-SPL 1W/1m: 91 dB
-max SPL 1m: 110 dB
-frequency response: 65 - 20K Hz
-indoor

-Input Impedance: 600/22K Ohms mic/line XLR inputs / 10K Ohms RCA inputs / 22K Ohms 1/4-inch effects returns
-Output Impedance: 50 Ohms 1/4-inch main outputs / 1K Ohms RCA record outputs / 100 Ohms effects output
-Total Harmonic Distortion: .01% Typical
-Signal to Noise Ratio:> 90dB typical
-Maximum Input Level:-10dBu/+20dBu mic/line XLR inputs / +20dBu RCA line inputs / +20dBu Effects inputs

- 120W rms @ 70 / 100 volt
- intuitive user interface
- ground breaking, logic and sheer rear panel
- prominent, illuminated, bigger Volume control
- 2 mic/line input and 4 stereo line, mono summed inputs
- smart left-to-right 4 level priority and rear panel design
- emergency input
- paging mic with chime
- 24VDC override output

-Frequency: 2.5 kHz
-Type: Passive built-in
-HF: 1"
-LF: 3"
-Range (-10 dB): 60 Hz - 20 kHz
-Response (± 3 dB): 90 Hz - 18 kHz
-Impedance: 8 Ohms/ 100V
-Line Transformer Tappings: 1: 20 W / 500 Ohms; 2: 10 W / 1000 Ohms; 3: 5 W / 2000 Ohms
-IP40
-Max. Power: 60 W
-Sensitivity (1W/1m): 85 dB

dimensions 300 x 380 x 600 mm
loudspeaker system single
woofer size 10 inch
impedance (ohms) 4
low impedance dynamic power 250 watts
low impedance RMS power 125 watts
SPL 1W/1m 96 dB
frequency response 45 - 150 Hz
IP20
weight 18.50 kg

Newhank BDP 432-RS 1U
19” Rack Solution for Playback of Blu-rays and other popular Media Formats from Disk or USB.
Equipped with a second generation RS-232 control port that accepts separate commands for on and off.

-outside diameter: 210 mm
-depth: 80 mm
-cutout: 186 mm
-installation grip range: 2-25 mm
-loudspeaker system: 2-way
-woofer size: 6.5 inch
-woofer cone material: polypropylene
-tweeter size: 1 inch
-transformer power taps
-100 V: 20 - 10 - 5 watts
-70 V: 20 - 10 - 5 - 2.5 watts
-impedance: 16 ohms
-low impedance dynamic power: 60 watts
-low impedance RMS power: 30 watts

- 30W rms @ 100 volt or 4 Ohm
- intuitive user interface
- ground breaking, logic and sheer rear panel
- prominent, illuminated, bigger Volume control
- compact 9.5" housing
- 1 mic/line input and 2 stereo line, mono summed inputs
- smart left-to-right 4 level priority and rear panel design
- emergency input
- paging mic with chime
- 24VDC override output

output power RMS 100 volts 2 x 60 watts
output power RMS bridged 100 volts 120 watts
minimum impedance load per channel 4 ohms
minimum impedance load bridged per channel 8 ohms
power consumption (max) 175 watts
19" rack mounting, 1U
depth (build in) 230 mm
depth (incl front) 239 mm
power supply 115 - 230 VAC
output channels 2
line input (un)balanced 2
50 - 20 k Hz
weight 5.7 kg

Power amp topology: Class-D
Output channels: 4
Output power RMS 4 ohms: 4 x 240 watts
Output power RMS bridged 8 ohms: 2 x 480 watts
Sine wave capability: 500ms at full RMS output power
Minimum load impedance: 4 ohms
Minimum load impedance bridged: 8 ohms
Output power RMS 100 volts: 4 x 240 watts
Output power RMS 100 volts bridged: 2 x 480 watts
Line input(s) balanced: 4 Euroblock

Checkmate is a stereo audio source including FM tuner, USB slot, SD slot and Bluetooth reciever. Checkmate has an unbalanced and balanced set of stereo outputs on the rear and a headphone output (jack) with volume control in front panel. IR remote control, FM antenna, 2x RCA cables and rack-mount bracket are included.

-dimensions: 131 x 109 x 125mm
-loudspeaker system: full range
-woofer size: 3 inch
transformer power taps:
-100V: 10 - 5 - 2.5W
-70V: 10 - 5 - 2.5 - 1.25W
-impedance (ohms): 16
-low impedance dynamic power: 40 watts
-low impedance RMS power: 25 watts
-SPL 1W/1m: 89 dB
-frequency response: 94 - 20K Hz
-IP40
-weight: 1.18kg

-dimensions: 164 x 136 x 155mm
-loudspeaker system: 2-way
-woofer size: 5.25 inch
-tweeter size: 1 inch
transformer power taps:
-100V: 30 - 15 - 6 - 3W
-70V: 30 - 15 - 7.5 - 3 - 1.5W
-impedance (ohms): 16
-low impedance dynamic power: 80 watts
-low impedance RMS power: 50 watts
-SPL 1W/1m: 92 dB
-frequency response: 94 - 20K Hz
-IP40
-weight: 2.05kg

-dimensions: 144 x 144 x 238 mm
-loudspeaker system: 2-way
-woofer size: 4,25 inch
-woofer cone material: coated paper
-tweeter size: 1 inch
-mounting system: clickmount
-100V transformer power taps: 20 - 10 - 5 - 2.5W
-70V transformer power taps: 20 - 10 - 5 - 2.5 - 1.25W
-low impedance dynamic power: 70W
-low impedance RMS power: 50W
-SPL 1W/1m: 89 dB
-80 - 20k Hz
-weight: 1.85 kg

-dimensions: 198 x 190 x 328 mm
-loudspeaker system: 2-way
-woofer size: 6,5 inch
-woofer cone material: coated paper
-tweeter size: 1 inch
-mounting system: clickmount
-100V transformer power taps: 60 - 30 - 15 - 6 W
-70V transformer power taps: 60 - 30 - 15 - 7.5 - 3 W
-impedance (ohms): 16
-low impedance dynamic power: 200W
-low impedance RMS power: 150W
-SPL 1W/1m: 90 dB

-dimensions: 198 x 190 x 328 mm
-loudspeaker system: 2-way
-woofer size: 6,5 inch
-woofer cone material: coated paper
-tweeter size: 1 inch
-mounting system: clickmount
-100V transformer power taps: 60 - 30 - 15 - 6 W
-70V transformer power taps: 60 - 30 - 15 - 7.5 - 3 W
-impedance (ohms): 16
-low impedance dynamic power: 200W
-low impedance RMS power: 150W
-SPL 1W/1m: 90 dB

hight 265 mm- width 276 mm
loudspeaker system 2-way - woofer size 6.5 inch
tweeter size 1 inch
mounting system dual Gripple wire suspension system - 100V transformer power taps 60 - 30 - 15 - 7.5 watts
70V transformer power taps 60 - 30 - 15 - 7.5 - 3.75 watts impedance (ohms) 16
low impedance dynamic power 120 watts low impedance RMS power 60 watts
SPL 1W/1m 91

dimensions 470 x 120 x 420 mm
woofer size 6.5 inch
impedance (ohms) 8
low impedance dynamic power 2 x 80 watts
low impedance RMS power 2 x 40 watts
SPL 1W/1m 85 dB
frequency response 50 - 200 Hz
IP20
weight 8.00 kg

- 240W rms @ 70 / 100 volt
- intuitive user interface
- ground breaking, logic and sheer rear panel
- prominent, illuminated, bigger Volume control
- 2 mic/line input and 4 stereo line, mono summed inputs
- smart left-to-right 4 level priority and rear panel design
- emergency input
- paging mic with chime
- 24VDC override output

-Frequency: 2.5 kHz
-Type: Passive built-in
-HF: 1"
-LF: 5"
-Range (-10 dB): 55 Hz - 20 kHz
-Response (± 3 dB): 70 Hz - 18 kHz
-Impedance: 8 Ohms/ 100V
-Line Transformer Tappings: 1: 40 W/ 250 Ohms; 2: 20 W/ 500 Ohms; 3: 10 W / 1000 Ohms
-IP40
-Max. Power: 100 W
-Sensitivity (1W/1m): 87 dB