DuraTruss DT31/2-025 - 25cm Black\r - \rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly and dismantling. The belt tube of 50 mm aluminum tube with a

DuraTruss DT31/2-050 - 50cm Black\r - \rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly and dismantling. The belt tube of 50 mm aluminum tube with a

DuraTruss DT31/2-075 - 75cm Black\r - \rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly and dismantling. The belt tube of 50 mm aluminum tube with a

DuraTruss DT31/2-100 - 100cm Black\r - \rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly and dismantling. The belt tube of 50 mm aluminum tube with

DuraTruss DT31/2-150 - 150cm Black\r - \rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly and dismantling. The belt tube of 50 mm aluminum tube with

DuraTruss DT31/2-200 - 200cm Black\r - \rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly and dismantling. The belt tube of 50 mm aluminum tube with

DuraTruss DT31/2-250 - 250cm Black\r - \rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly and dismantling. The belt tube of 50 mm aluminum tube with

- DuraTruss DT31/2-300 - 300cm Black\r - \rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly and dismantling. The belt tube of 50 mm aluminum tube wi

DuraTruss DT31/2-350 - 350cm Black\r - \rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly and dismantling. The belt tube of 50 mm aluminum tube with

DuraTruss DT31/2-400 - 400cm Black\r - \rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly and dismantling. The belt tube of 50 mm aluminum tube with

DuraTruss DT31/2-450 - 450cm Black\r - \rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly and dismantling. The belt tube of 50 mm aluminum tube with

DuraTruss DT31/2-500 - 500cm Black\r - \rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly and dismantling. The belt tube of 50 mm aluminum tube with

DT 31/2-L45 2 Way Corner 45° Black

- Diametrics main pipe: 50mm
- Wall thickness: 2 mm
- Material: Aluminium EN-AW 6082 T6 (AlMgSi1)
- Colour: aluminium
- Included in delivery: 1 cone, 2 steel pins, 2 safety clips
- Length: 2356mm (without cone)
- Width: 50 mm
- Height: 50 mm
- Weight: 2,15 kg

DuraTruss DT31/2-C21-L90 - 2 way corner 90° Black\r - \rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly and dismantling. The belt tube of 50 mm

DuraTruss DT31/2-T35 black - 3 way T-joint 90°, Black\r - \rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly and dismantling. The belt tube of 50

DuraTruss DT 31/2-Circle Part-1m-360dgr Black\r - \r\rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly and dismantling. The belt tube of 50 mm aluminu

DuraTruss DT 31/2-Circle Part-1,5m-90dgr black - Circle part 90° for 1,5 meter circle, black\r - \rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assemb

DuraTruss DT 31/2-Circle Part-2m-90dgr black - Circle part 90° for 2 meter circle, Black\r - \rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly a

DuraTruss DT31/2-Circle Part-3m-90dgr black - Circle part 90° for 3 meter circle, Black\r - \rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly an

DuraTruss DT31/2-Circle Part-4m-90dgr black - Circle part 90° for 4 meter circle, Black\r - \rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly an

DuraTruss DT CUBE 1 - Multi Junction Cube M10 for DT31 - DT44\r - \rThe DURATRUSS DT31 is a 1-point trussing system, also referred as a "pipe", which is connected to a conical connector, bolt and split pin. The advantage of the quick connector system lies in the fact that it closes force-lockingly with the belt tube and allows rapid assembly during frequent assembly and dismantling. The belt tube o

DT HC-Cube 1 - Half connector with M10 bolt, pin & clip\nFor multi junction cube 1.

DuraTruss DT 30/40-Terminal Piece, black for DT 31 -> 44

DuraTruss DT 30/40-CC - Connector - \rConnector for trusssystems DT-31, DT-32, DT-33, DT-34, DT-43 and DT-44.

DuraTruss DT 30/40-Steel Pin for DT 31 -> 44

DuraTruss DT 20/40-Safety Clip \rThis clip is used for all steel pins from DuraTruss for the ranges DT 22 -> 44.