- VERVANGER VOOR WMS-100 en WBS-200!
- Dual PLL/UHF wireless mic receiver used in combination with: HF-MIC: wireless hand microphone, HF-BPACK: belt-pack and lavalier mic
- Can be combined with the mic combinations you need: 2 x HF-MIC, 2 x HF-BPACK, 1 x HF-MIC + 1 x HF-BPACK
- The plastic case can hold one of the above combinations
- LCD display for easy setup
- Easy channel setup via IR transmission
- Belt-pack and hand mic can both be used with rechargeable batteries
- 16 selectable freq. via PLL synthesizer: Receiver 1 (left): ch. 1 to 8, Receiver 2 (right): ch. 9 to 16
- 2 separate balanced XLR outputs
- 1 x 6.3mm jack output with mixed signal from both channels
- Freq. range: 823-832MHz

- Carrier Freq. Range: 823-832MHz
- RF Power Output: 10mW (10dBm)
- Oscillation Mode: PLL synthesized, 16 channels selectable
- Freq. Stability: +/- 0,002%
- Freq. Response: 40Hz – 16kHz
- Mic Capsule (Lavalier): Condenser
- Battery: 3V DC (2x1,5V AA size batteries – batteries NOT included!)

- VERVANGER VOOR WMIC-100!
- Carrier Freq. Range: 823-832MHz
- RF Power Output: LO (5dBm -3,16mW) - HI (10dBm-10mW)
- Oscillation Mode: PLL synthesized, 16 channels selectable
- Freq. Stability: +/-0,002%
- Freq. Response: 40Hz – 17kHz
- Mic Capsule: Dynamic
- Battery: 3V DC (2 x 1,5V AA series batteries – Batteries NOT included!)

- Sensitivity: - 47±3dB(1.5V,680KΩ;0dB=1V/Pa,1KHz)
- Output impedance: Low Impedance (680Ω)
- Directivity: Unidirectional
- Mic Capsule: Condenser
- Freq. Range: 100Hz – 16kHz
- Operation voltage range: 1V – 10V
- Standard operation voltage: 1,5V
- Current consumption: <0,5mA
- Max. input sound pressure level: 110dB
- S/N ratio: >60dB

- Directivity: Unidirectional
- Micr Capsule: Electret Condenser
- Freq. Range: 60Hz – 12kHz
- Operation voltage range: 1,5V – 10V
- S/N ratio: 24dB