Specifications

Powerinput: AC 220V~240V / 50Hz
Power Consumption @ Full Load: 3450W
Power output: 5A each channel / 15A Max Total
Operation: build-in programs, auto run, slave, sound, DMX
DMX channels: 1, 2, 4 CH
Patchable per channel
Working environment: 0°C~40°C
Fixture Connection: XLR (3-pin) DMX in/out
Dimensions: 210 x 72 x 260 mm (LxWxH)
Weight: 2,84 kg

Specifications

Connector: 3p XLR male & female
Channel Output: 5A/CH., Total 16A

Specifications

Voltage: AC 230V-50 Hz (CE)
Channel-Output: 10A max.
DMX-Output: 3-pin XLR socket
(female)
DMX-Input: 3-pin XLR socket (male)
Fuse: F 10A 250V 5 x 20 mm
Dimensions: 195 x 105 x 90 mm (LxWxH)
Weight: 1,26 kg

- 4channel DMX Dimpack - 4x5A
- 512 available addresses on each connector
- Fade time, memory backup, Max. Dimm-setting, channel-dimming, Manual Program
- Auto-program, Hold-sound, program-sound, Auto-sound
- Size: 330x150x115 mm
- Weight: 2,98 kg

Specifications

Fourbar with built in DMX dimmer.
Load per channel 2A. Max. load 8A.
Built-in controller with 16 pre-programmed programs for stand-alone use.
Pre-heat function.
Memory back-up, master dimmer, channel dimmer, manual program, hold sound, progr. sound, auto sound.
Dimensions: 1310 x 80 x 70 mm (LxWxH)
Optional Powercable: 90527 Powercon > schuko 1,5m (not included)

Powercon Input 240V / 50Hz
Powercon Output 240V / 50Hz
Length: 150 cm
4 Power Outputs
4 DMX Outputs
3 and 5 Pole XLR Connectors
DMX signal LED
Power signal LED
M-10 Sliding profile
Spigot Adaptor

- 1Channel dimpack
- 1x10A
- Standard DMX 512, internal/external fader supplied
- DMX in/out 3p XLR
- Size: 150 x 125 x 82 mm
- Weight: 1.5 kg

- 4 Channel switch/dimpack - 4x5A
- Standard DMX 512 with built in faders
- DMX in/out 3p XLR
- Mode: Master/Slave, Program, DMX(4 independent channels), Sound-sensitive
- 16 built in programs
- Size: 250 x 208 x 68 mm
- Weight : 2.5 kg

- DMX chase dimpack 4x5A
- 4 Channels
- French sockets
- 260 x 190 x 75 mm\r
- 2.7 kg

6 x 10A dimmer for DMX & analog signals, connection via terminal blocks - Universal dimmer pack for professional use - Can be operated 1-phase or 3-phase - 6 x 10 A - DMX-control or analogue control possible - The DMX-starting address can be adjusted on the device - Synchronisation of several DPX-610 possible via DMX - Adjusting the lamp pre-heat - All modes are displayed via LEDs and the display

You can dim if you want - Eurolite dimmer pack for professional usersWith the DPX-610 S DMX Dimmer Pack by Eurolite you get a digital 6-channel dimmer pack for professional use, Eurolite dimmer packs have been an established part of many stages and events since the early 90's, DMX or analogue The device can be controlled analogously or via DMX, The DMX starting address can be set directly on the

6 x 10A dimmer for DMX & analog signals with two 16-pin multipin outs - Universal dimmer pack for professional use - Can be operated 1-phase or 3-phase - 6 x 10 A - The DMX-starting address can be adjusted on the device - Synchronisation of several DPX-610 possible via DMX - Adjusting the lamp pre-heat - All modes are displayed via LEDs and the display - With automatic circuit breaker per channel

Digital 6-channel dimmer pack - Universal dimmer pack for professional use - Can be operated 1-phase or 3-phase - 6 x 20 A - DMX-control or analogue control possible - The DMX-starting address can be adjusted on the device - Synchronisation of several DPX-620 possible via DMX - Adjusting the lamp pre-heat - All modes are displayed via LEDs and the display - With automatic circuit breaker per chan

12 x 16A dimmer, service friendly modules, 2 16-pin multipin sockets - Universal power-pack for professional use - Can be operated 1-phase or 3-phase - 12 x 16 A - DMX control via every standard DMX controller - The DMX-starting address can be adjusted on the device for each channel individually - Synchronisation of several DPX-1216 possible via DMX - Each channel can either be dimmed or switched

Reliability is always important, Especially at professional events the breakdown of any part of the equipment cannot be accepted, The DPMX-1216 dimmer pack series is the right answer here because it plays it safe: this universal output stage has an automatic circuit breaker on every channel, so single failures can be corrected without causing a complete blackout, Another benefit are the different

Reliability is always important, Especially at professional events the breakdown of any part of the equipment cannot be accepted, The DPMX-1216 dimmer pack series is the right answer here because it plays it safe: this universal output stage has an automatic circuit breaker on every channel, so single failures can be corrected without causing a complete blackout, Another benefit are the different

Reliability is always important, Especially at professional events the breakdown of any part of the equipment cannot be accepted, The DPMX-1216 dimmer pack series is the right answer here because it plays it safe: this universal output stage has an automatic circuit breaker on every channel, so single failures can be corrected without causing a complete blackout, Another benefit are the different

Reliability is always important, Especially at professional events the breakdown of any part of the equipment cannot be accepted, The DPMX-1216 dimmer pack series is the right answer here because it plays it safe: this universal output stage has an automatic circuit breaker on every channel, so single failures can be corrected without causing a complete blackout, Another benefit are the different

4-channel switch pack, up to 5 A load per channel, control with relay - Relay allows for controlling luminaires with electronic transformers (e,g, LED effects) - 4 controllable channels - LED indicator per channel - 5 A load per channel - Maximum current 16 A - Outputs via 4 safety sockets - DMX512 input and output - DMX starting address adjustable via DIP switches - For truss installation and wa

4-channel DMX switch pack, up to 5 A load per channel, control per Triac - 4 controllable channels - 5 A resistive load per channel - Maximum current 16 A - Outputs via 4 safety sockets - LED display of all channels - DMX512 input and output - With Control Board for programming scenes and chasers - For mounting on trussing or directly to the device - Can be operated in 4 CH mode - Controlling by

4-channel DMX dimmer pack - DMX dimmer pack for truss installation - LED status indication for each output channel - Control panel with 4-digit LED display for addressing and settings - Individual dimmer curves per channel (linear, square, inverse square, switch) - Automatic and sound-controlled chase running mode - DMX512 input and output - Outputs via 4 safety sockets - 2 x M8 thread - Programm

Power distributor with switching panel with 6 safety sockets - Fully cabled housing with 6 safety sockets - For 16 A safety-plug - 1 switch - Controlling by On/off switch on devicePower supply:230 V AC, 50 HzPower consumption:3680 WOutput power:Max, 3680 W per channalOutput current:Max, 16 A per channalPower output:6 x Safety contact (F), hinged lid mounting versionPower connection:Fixed Power s

6-fold switching panel for separate switching of 6 safety sockets - Fully cabled housing with 6 safety sockets - For 16 A safety plug - 6 switches - 6 fuseholders with 6,3 A - Controlling by On/off switch on devicePower supply:230 V AC, 50 HzPower consumption:3680 WOutput power:Max, 1150 W per channalOutput current:Max, 5 A per channalPower output:6 x Safety contact (F), hinged lid mounting versi

8-fold switching panel for separate switching of 8 IEC outputs - Fully cabled housing with 8 IEC outputs - 8 illuminated switches - 10 A breaker on the front panel - Controlling by On/off switch on devicePower supply:230 V AC, 50 HzPower consumption:2300 WIP classification:IP20Protection class:Class IOutput power:Max, 2300 W per channalOutput current:Max, 10 A per channalPower output:8 x IEC conn

Panel, 10 switches (10 x flash buttons), separate switching (10 safety sockets) - Fully cabled housing with 10 safety-sockets - For 16 A safety-plug - 10 switches with flash-buttons - 10 manually resetable fuses with 6,3 A - Controlling by On/off switch on devicePower supply:230 V AC, 50 HzPower consumption:3680 WProtection class:Class IOutput power:Max, 1150 W per channalOutput current:Max, 5 A