- Class D Amp - Up to 8 speakers in stereo mode
- 4x150W RMS @ 4Ohm / 4x80W RMS @ 8Ohm / 2x300W RMS @ 8Ohm Bridged
- Input sensitivity: 4dBu +/- 2dB
- Frequency response: 20 Hz-20 kHz
- Input: 4x XLR/Jack
- Output: 2x 4-Pole Speakon / Binding post-jacks
- Short-circuit / Overcurrent / High Temp protections
- Independent limiter per channel
- 2U high

-4 Ohms RMS stereo power (minimum): 2 x 150 W RMS
-8 Ohms RMS stereo power: 2 x 80 W RMS
-8 Ohms bridged power (minimum): 1 x 300 W RMS
-Signal-to-noise ratio Less than 90 dB
-Input sensitivity: 4 dBu +/-2 dB
-THD at 1kHz 1/2 rated power Less than 0.1%
-Slew rate: - 65 dB at 1 kHz
-Frequency response (4 Ohms/1 W): +0.5 dB ; 20 Hz-20 kHz

-4 Ohms RMS stereo power (minimum): 2 x 250 W RMS
-8 Ohms RMS stereo power: 2 x 130 W RMS
-8 Ohms bridged power (minimum): 1 x 500 W RMS
-Signal-to-noise ratio Less than 90 dB
-Input sensitivity: 4 dBu +/-2 dB
-THD at 1kHz 1/2 rated power Less than 0.1%
-Slew rate: - 65 dB at 1 kHz
-Frequency response (4 O/1 W): +0.5 dB ; 20 Hz-20 kHz

-8 x 4 x 200 W RMS
-4 x 4 x 300 W RMS
-8 x 2 x 600 bridged stereo W RMS
-8 x 2 x 200 bridged stereo W RMS + 1 x 8 x 600 W RMS
-Sensitivity at 8 x rated power: 0.775 m
-Frequency response (1 W) 20 Hz - 25 kHz (+0 dB, -0.5 dB)
-Phase response (1 W) 20 Hz - 20 kHz (+10°, -20°)
-Signal to noise ratio below rated power A-weighted : >100 dB
-THD: (20 Hz - 20 kHz ) 0.1%